Materials
A demand-sorted material storage provides the conditions for short delivery times, maximum flexibility and punctuality. Also, the materials used, the quality plays a decisive role: For use only high-quality cold-rolled strips reputable, certified mills come. Materials are processed from 0.05 to 10 mm thick and coil widths up to 400 mm.
The range of materials includes the following qualities:
Unalloyed steels according to DIN EN 10139
Hardening steels according to DIN EN 10132-2
Quenched and tempered steels according to DIN EN 10132-3
Spring steels according to DIN EN 10132-4
Stainless steels according to DIN EN 10088-2
Aluminum and wrought aluminum alloys according to DIN EN 485-1 and DIN EN 485-2
Copper and wrought copper alloys according to DIN EN 1652 and DIN EN 13599
Hard paper, pressboard, plastic

Toolmaking
The quality of the tool is one of the most important prerequisites for trouble-free and efficient punching parts production.

The tooling of E. Winkemann manufactures tools with highest precision. The field of tool / construction is equipped among others with the following devices:
2D and 3D CAD systems in the field of tool design
CNC EDM, drilling, milling and jig grinders with CAM connection
The exchange of design data is in IGES or DXF format. For around 6000 are consequential, composite, flexural, and embossing tools or total cuts available.

Stamping technology
The stamping of E. Winkemann is equipped with a powerful machinery, responsive to the diverse areas of use and the materials to be processed.
The machines range from mechanical or hydraulic punching machines and presses to various bending machines:
Hydraulic machinery and punching machines (25 to 500 tons)
Eccentric (10 to 35 tons)
Hydraulic presses (15 to 200 tons)
Punching and bending machines (up to 15)
Stamping machines (up to 200)
Fine blanking machines (up to 700)

Fineblanking / cutting
The fine blanking allows the production of precision parts with smooth cut surfaces and high dimensional accuracy.
Costly rework can be omitted.
Straight-cut percentage up to 100%.
The fine blanking machines with max. 320 tons pressing force can process material thicknesses up to about 7 mm.
In addition, there is also the possibility of products on fine blanking machines with max. To process 700 tons press force.

Flatting
If the required thickness tolerance or flatness can not be achieved by cold rolling with the primary materials with a thickness of 0.8 mm, the parts are ground flat. The result is a thickness tolerance and flatness of ± 0.005 mm. High demands of these parameters are primarily intended for products which are used for example in units and transmissions. Representing this are start-up, passport and shims to call.
Fine grinding
Slices or moldings with a thickness of 0.8 mm and an outer diameter 4.0 mm könnnen be honed for maximum precision requirements with a tolerance of ± 0.001 mm.

Post
For the post-processing of the products are modern, electronically controlled and linked compensation and processing equipment available:
Fully automatic compensation system with process data acquisition and batch documentation
Program-controlled systems for automatic vibratory deburring
Washing and cleaning equipment
Machines and assembly equipment for drilling, tapping, riveting, stamping and assembling.

Surfaces
All parts ...

We, the FEBU are a medium-sized company with 29 employees, and headquarters in the industrial area of Burbach – Würgendorf, plant road 19, with direct connection to the A45.

The foundation of the company FEBU dates back to 1965.
At that time the father of the current managing director Andreas Fey started with the production of punching, pressing and drawing tools, as well as with the production of windshield washers made of metal, in the rooms of his parents’ house.

Due to the increasing demand, the constantly growing space requirements were initially met with the construction of a 150 m² production and storage hall in Burbach-Holzhausen in 1970. Due to the further steady growth of the company, the production and storage areas were moved to Burbach-Würgendorf in 1988, not least because of the favourable transport connections. Through expansions in recent years, a total of 5,350 m² of production and storage space is currently available.

In the following years the product range was extended in all areas.
Stamping technology

With the founding of the company in 1965, the production of the first stampings for the company’s own windscreen washers and water slides began. In addition to the production of stampings for the company’s own products, other customers were quickly acquired and sales were continuously increased through constant investment in the latest machines. Thus, the most modern automatic punching machines and eccentric presses up to 200t pressure are available. For further processing, we have welding presses, automatic threading machines, as well as stud welding equipment and various special machines. Here a production can take place on tools manufactured by us or provided by you.

Among steel (blank, galvanized + coated) and stainless steel we also process non-ferrous metals.

Injection moulding technology
With the decision of the current managing director Andreas Fey in 1993 to implement the production of plastic injection molded parts for the ice scrapers and windshield washers in house to be able to react faster and more flexibly to customer requests, he laid the foundation for the current 16 machines comprehensive injection molding production. After the purchase of the first injection moulding machine it did not take long until further articles from other areas were added and the first 2-component injection moulding machine was purchased, first for the production of the first own 2-component ice scraper, later also for further customer-specific articles. Gradually, the injection moulding production was expanded and finally, with the takeover of the company Schmidt Kunststofftechnik (founded in 1955) at the Biedenkopf-Eckelshausen location in April 2020, a second location was added.

Toolmaking
The in-house tool shop, with which the then founder of the company Horst Fey laid the foundation stone, is still the pillar of all production areas today. Thanks to our ultra-modern tool shop, we can react quickly and precisely to customer requirements and maintain our tools accordingly. Here we design and manufacture punching and injection moulding tools with a tool length of up to 2,000 mm, as well as fixtures and mountings for various machines.

Cleaning equipment and ice scrapers
The production of cleaning equipment includes the production of metal windscreen washers and water sliders, as well as the production of various plastic windscreen washers and ice scrapers. By investing in the most modern machines and developing our own products and tools, we are still able to produce competitively in this field.

Since its foundation in 1965, FEBU has been able to establish itself throughout Europe. The export, also beyond the European borders, shows positive figures.
Due to a manageable number of employees the company remains flexible and can react quickly to special customer requirements.

Fischer stamping and forming technology GmbH was founded in February 1998 by Ralf Fischer. As a longtime leader of the stamping and forming technology in metal processing Breyell, Mr. Fischer was able to gain experience, which are now incorporated consistently into the company. Versatility and flexibility are our strengths.

On 5 eccentric presses and punching machines perforated strips and stamped parts can be manufactured up to 600 mm width and 400 tons press force. Are processed slit strips in the grades: Warm, Cold, Galvanized, stainless steel and aluminum

Processing, order such as cut, degreasing, galvanizing or cure can also be handled by us.
Alternatively, orders can be processed as a reward business or full business.
Customers here include suppliers to the automotive industry, profiler, shelf farmer, construction and furniture industries etc.

Technology + Research & Development for a 100% “Made in Italy” Supply Chain

A 100% Certified Italian Supply Chain which, since 2004, has been awarded the ISO 9001:2015 Quality Management System Certification followed by the BS OHSAS 18001:2007 Occupational Health and Safety Management System Certification, because the ‘Quality of the Product’ goes hand in hand with the ‘Quality of Life’.
The strong attention to the ‘Details of Quality’ will lead F.lli Perin to also obtain the MOCA Certification, which guarantees processes that do not transfer to steel substances that are dangerous to human health or that could compromise the organoleptic quality of food.
But the new frontier will be the Green Economy, where words such as Sustainability, Environmental Impact, and Energy Efficiency, with the acquisition of TEE Securities, give an idea of a new, imminent success.

It all started in 1960, when Giovanni Perin, armed with knowledge and experience in the sector, decided to start his own business and soon became the reference point for that ‘Industrial District’, the Inox Valley, which in the meantime was developing in Veneto, between the provinces of Treviso and Belluno.
Today, in its third generation, F.lli Perin srl is a world leader in the processing of stainless steel for the production of components for large systems in the Ho.Re.Ca., community, industry, and furniture sectors.
A success story for a company that is capable of combining the experience of the ‘founder’ with research and technological development, paying special attention to relationships and guaranteeing a 100% ‘Made in Italy’ supply chain.

Research & Development are fundamental because they allow us to have a competitive advantage through products and processes projected into the future, but it also means acquiring suitable tools. F.lli Perin, with a program of 2 million euros of investments in the last 2 years, now has cutting-edge equipment, including a Mitsubishi Fibra laser with automatic loading and unloading of the latest generation, for an even greater reliability of production.

Why choose F.lli Perin? Because from the ‘Certified Italian Supply Chain’, to ‘Research & Development’, to ‘Continuous Improvement’, up to the affirmation of a ‘Strong Global Personality’, F.lli Perin has established itself on the international market with recognized competence and determination.
A company history that, over the turn of two centuries, has translated into a management of the highest specialization and motivation capable of governing a dynamic technological system always aimed at the total satisfaction of the design needs of customers while also developing and proposing new ‘technological concepts’ like the new coloured surfaces that combine strong aesthetic appeal with the usual consistency and reliability of traditional stainless steel.