Discover specialized suppliers for shot blasting on Techpilot. Our platform connects buyers with suppliers who use advanced blasting technologies to treat surfaces efficiently. Use the e-sourcing process to find suitable suppliers in real time.
USE THE EXPERIENCE OF A COMPETENT PARTNER
Whether single or series production, we respond flexibly to your individual needs. We manufacture precision parts from all machinable materials, such as aluminum, brass, steel or stainless steel and various plastics.
Our services cover the areas of the parts - production via surface treatment on to the assembly of components or units. Of course, we design and produce special tools, special machines that are controlled electrically, pneumatically or hydraulically and complete equipment for you. Sämmtliche of us delivered products are quality tested according to the wishes of our customers.
Ask us, we can advise you and provide you with a not binding offer. Our contact address can be found here.
Under the heading manufacturing capabilities, we present an exemplary selection of mechanical parts. The products we manufacture are components for the high-tech industry. The objects shown are in unterscheidlichsten Indutriezweigen such as aerospace, dental technology and mechanical engineering are used.
Founded
1981
Employees
< 5
Certifications
Nidderau
Germany - 61130
Donlouco is a supplier and manufacturer of customer specific components with extensive experience in the power distribution, hydraulics & electromechanical component field.
Headquarters are based in Ireland with customer services, engineering support, scheduling and manufacturing in the Far East.
Donlouco has extensive experience in dealing with customer requirements from a quality, engineering standards point of view with a unique ability to be able to communicate these requirements directly to highly trained Donlouco staff in China. Covering all areas of manufacturing, quality control and full logistics control to deliver components exactly to customer expectations time after time and over the longer term.
Founded
Employees
5 - 10
Certifications
Cork
Ireland - P51RF60
About Us
Dopfer Precision Mechanics and Maschienbau is a company that specializes in high-precision machine single and serial parts. Founded Dopfer Precision Engineering
in 1991 in Gabelbachergreut. To continue meeting the high demands of precision ments, the company was relocated in 2001 after Zusmarshausen in a newly built hall of 500 sqm.
The expansion allowed for an extension of the Maschienenparks as well as the expansion of the team to the now five dedicated and skilled Zerspannungsspezialisten belong.
We all work with the common goal is always to meet the needs of our customers through inovation and skill.
Production
Is produced on machines with the highest quality standard. We work with both conventional and numerically controlled lathes and milling machines. In addition, a surface grinding machine, shielding gas are - and Wig welding equipment for steel-VA and Aluschweißung available.
As a further core activities we can offer you work-hardening, Teniferbehandlung, as well as plasma Trier works. Cylindrical grinding or assembly can be carried out at the request enbenso.
Service
We specifically to your wishes and advise you in choosing the right material and to show you the best manufacturing process for your product. Of course, we help you find the right solution for problem cases. We have special-purpose partners or contacts with designers and control farmers. This gives you the security of knowing that when your tasks a komptenten contact person at your side.
Founded
1991
Employees
< 5
Certifications
Zusmarshausen OT Wollbach
Germany - 86441
Founded
Employees
< 5
Certifications
Oyten
Germany - 28876
Would you like to know which suppliers are ideally suited to your requirements?
Register now and submit your request.
D.S.A. INGRANAGGI S.r.l. was founded in 1988, thanks to years of experience and with the aid of modern machineries is able to offer high quality products and guarantee. The production concerns straight bevel gears and spiral bevel gears constructed through Gleason system, transmission shafts, axle shafts, spur gears. The professionalism allows us to satisfy different demands: from a single piece to mass-productions. The components are made on the basis of a technical drawing or in reference to a sample.
D.S.A. INGRANAGGI S.r.l. has more than 50 machines divided into several sections, which produce spiral bevel gears, straight bevel gears, spur gears.
Founded
1988
Employees
20 - 50
Certifications
Fossacesia
Italy - 66022
Founded
2022
Employees
< 5
Certifications
Zeitlarn
Germany - 93197
Smaller company with about 10 employees,
Mainly mechanical machining of castings and metal parts.
Founded
2014
Employees
5 - 10
Certifications
Haan
Germany - 42781
Dutch Valley International has a network of 25 companies in India that can offer high precision turning and milling.
In addition, die-cast aluminum and the forming work.
We can also deliver sheet metal composite parts in high quality.
We also provide the surface treatment such as galvanizing, quenching, coating powder etc. etc.
We accompany quote request to delivery free domicile.
For more information on www.dutchvalleyinternational.com
Or call 0031651939988
Founded
2010
Employees
Certifications
Ede
Netherlands - 6712 CR
Founded
1948
Employees
20 - 50
Certifications
Yermenonville
France - 28130
Importer, Exporter, Consultant in LED field, supplier of all what the customer wants.
Founded
Employees
Certifications
Emmer-compascuum
Netherlands - 7881 JK
The D&W Group - 5 top specialist companies
The D&W Group consists of five independent limited liability companies.
Each company specialises in a separate field, such as tailor-made steel and plant construction, specialised machinery and equipment and mechanical processing.
In addition to these core business activities, the D&W Group manufactures semi trailers and chassis for containers and trailers, and operates as a contract manufacturer for the mechanical processing of metals and plastics.
What is today the D&W Group began in 1991 with a company called MWD - Mechanische Werkstatt und Dienstleistungsgesellschaft mbH. It employed ten people and operated primarily as a supplier to the construction and metalworking industry.
Over time, the company was able to extend its range of products and services by acquiring additional premises and plants, some of which are located on adjacent sites to the parent factory. In the course of this expansion, the following companies were established:
•D&W Sondermaschinen- und Vorrichtungsbau GmbH (1992),
•D&W Feuerfest- und Isoliertechnik GmbH (1993),
•D&W Stahl- und Anlagenbau GmbH (1993),
•D&W Handelsgesellschaft Feuerfest- und Isoliertechnik mbH (2004)
Today, the companies of the D&W Group employ about 150 trained workers and have an annual turnover in the region of 12 million Euro.
Thanks to the excellent skills level of the D&W employees, we can guarantee that all orders are completed according to schedule and with the necessary diligence and care.
Whether single-piece manufacture or serial production - D&W is your partner of choice
.
Founded
1992
Employees
100 - 200
Certifications
Parchim
Germany - 19370
The Eberhard Automatizace sro was founded in 2009 in Jihlava Czech Republic as a subsidiary of Eberhard AG Germany.
Our core competencies lie in the realization of projects of automation technology, general engineering and toolmaking.
Our services range from planning, design, parts production, assembly to Ausprobe and plant commissioning. Furthermore, we manufacture individual parts, small series and assemblies for our international customers mentioned in the drawing.
Moreover, we maintain a good cooperation with competent partner companies in the region, which will allow us to offer our customers a very wide range of services.
A flawless and professional-quality order execution, as is for our company as well as a fast, economical and flexible account of customer requests.
Quality starts with the job costing and processing.Our technically competent and motivated employees to take responsibility for quality in the manufacturing process. Desires our customers yet a 100% testing, and their documentation, we create these as well.
We offer the following manufacturing services:
mill
* CNC milling, 3-axis milling, 5-axis milling, conventional milling
Erode
* Wire EDM with wire diameters from 0.05mm and finishes from Ra 0,10μm
* EDM with surfaces from 0.5 micron Ra
* Start hole drilling from ø 0,1mm
grind
* Round, flat and profile grinding
surface treatment
* Sand and glass bead blasting, vibratory grinding / vibratory grinding, polishing
* Anodizing, hard anodizing, plating, galvanizing, hard chrome plating, bronzing, painting, etc.
* All hardening processes - such as hardening, carburizing, nitriding, etc.
Assembly
* Assembly to customer order
* Installation and Ausprobe of punching and bending tools
* Pre / final assembly of machines and modules to customer
quality assurance
* We guarantee the quality of our work you by competent and motivated employees.A certification according to DIN EN ISO 9001: 2008 we are aiming for in 2015, but already guarantee highest quality and punctuality. On request, we carry out a 100% inspection of parts.
Translation by Google Translate
Founded
2009
Employees
20 - 50
Certifications
Jihlava
Czech Republic - 58601
Dear Ladies and Gentlemen
We would like to introduce ourselves.
For more than 30 years, the company set its own knowledge, experience, our company has been transformed from a sole proprietorship to a limited company in the area consignment stock and know-how in the field of mechanical manufacturing as a supplier outsourcing partner for Verfügung.Seit 2010.
Some of these industries we serve are:
Office, equipment, laboratory, chemical, textile, plastic industries and car racing
(Formula 1)
Our aim is always to satisfy our customers through quality work,
in order to make a good and lasting business relationship.
We manufacture, control and maintain the quality in the sense of ISO 9001
We would be glad to establish a business relationship with you and would appreciate a contact.
Founded
2010
Employees
< 5
Certifications
Wolfhausen
Switzerland - 8633
... is a service company in the trade of outsourcing production and outside-services to solve manufacturing problems in the trade of machine tool, textile and forniture production. Competence and reliability are our aim.
We are working with carefully selected supplying partners creating the connection between requiring companies and the suppliers. Naturally we assist the business relationship with translation of the inquiries, clearing of technical details, “trouble-shooting” and follow custoimers and partners in case of visits and fair events.
MECHANICAL WORKING:
TURNING: traditional machines and CNC,
MILLING: traditional milling machines up to CNC machining centres;
GRINDING: surface grinding, circular grinding, external and internal grinding.
BORING, spark erosion,
STRUCTURAL STEELWORK- SHEET METAL WORKING: steel (stainless and not), aluminium and all other light metal, cutting (manual, robotized, oxygen-flame cutting, laser cutting, plasma cutting), bending, rolling, shearing, extrusion, cold stamping, punching (traditional and CNC), Welding (TIG, MIG, MAG, wire, robot), precision machining
SPECIAL-SPRING-Production (from drawings):
ASSEMBLING: of different materials for various fields: mechanical, metal, electronic, cosmetic; of different dimensions: small, tiny, medium, very large.
FOUNDRY: foundry models in wood and in resin,; model/forms of extruded aluminium or smelting aluminium, of bronze or cast iron; die-casting and smelting (aluminium, bronze, light magnesium alloys)
PLASTIC MATERIALS WORKING & TOOL PRODUCTION: injection moulding, vacuum forming, printing tools
MICROFUSION: steel and light metall (gold, silver, brass ecc.)
DIES AND MOULDS CONSTRUCTION AND STAMPING: moulds construction and the stamping of the plastic materials: for injection moulding (from 200 gr. up to 1000 gr.); vacuum forming, moulds construction and printing of the technical articles in polycarbon, nylon, ABS e polypropylene (from 35 T up to 130 T); stamping of the pieces of small and tiny dimensions with the maximum weight of 500 gr (the high precision components, cases for the stomatological products, cosmetics, screws, ecc.)
MOULDS CONSTRUCTION for all the types of the sheet metal working of the ferrous materials and alloys
TREATMENT: surface treatment, galvanizing, painting, thermic and heat treatment, surface hardening,crome-nickel plating, as well as out-sourcing of supplies in the following fields: mechanical engineering, motor-car components, electric and electronic industries, home appliances, pharmaceutical industry, sanitary engineering, heating systems and assembling (mechanical-electrical and many more).
We are looking forward to your call and would like to start a profitable co-operation with your company.
With kind regards Export Global Opportunities INTERNATIONAL
Founded
2002
Employees
20 - 50
Certifications
RIMINI
Italy - 47923
We are a medium-sized, metal processing company with its own development and production in Germany. The combination of modern working processes and decades of experience, we will continue to try to make your success our innovative edge.
What does this mean for them?
Professional project planning, Quick decision-making, Short delivery times and unique quality.
Why do you need it?
Because your technique also is not any, and thus there is no reason to settle for less to be satisfied...
Our core competencies
CAD design in 3d
In general, metal processing
Specifically, sheet metal processing
Bending / folding sheets up to a thickness of 8mm (CNC gesteuet)
Punching / nibbling sheets up to a thickness of 8mm (CNC controlled)
Welding of steel, stainless steel, aluminum, cast
Glass bead blasting
Polishing
Priming and painting
Maintenance
Preparing the materials for
o chromating
o Galvanizing
o Anodizing
o Powder coating
Special experience
Development and construction of frames and components in 19 "Technology
Development of radio and television broadcast van
Studio Furniture
Vehicle interior fittings (special designs)
Monitor walls
Casing of development through prototyping to
Founded
1994
Employees
20 - 50
Certifications
Langenlonsheim
Germany - 55450
Would you like to know which suppliers are ideally suited to your requirements?
Register now and submit your request.
EM DIP is an OEM/ODM stove manufacturer based in Serbia. Our stoves are sold in the EU market under the brands of our clients from Germany, Austria, and Switzerland. With 25 years of experience, we have developed and produced more than 70 different high-quality models for several European companies. Our products primarily include wood-burning stoves, but we also have expertise in creating fireplace inserts, pellet stoves, and bioethanol fireplaces. We tailor our work to meet the specific needs of our clients, whether that involves working from the client's technical documentation, provided samples, or creating our own 3D models and subsequent technical documentation.
Founded
1969
Employees
50 - 100
Certifications
Nis
Serbia - 18000
MAP. supplies the following products directly in their assembly:
- Machine beds made of mineral casting (DUROPOL)
- Weldments
- Machine covers
- Special cabinets
- Switchboards
- Mechan. Large parts up to 14 m and 50 to
The development, calculation and construction takes place in house.
MAP. manufactures with the latest laser machines, most modern welding equipment and welding robots complete system solutions from the machine bed of the machine casing up to the cabinet and control panel.
On a total area of 20,000 m² are Großbohrwerke for workpieces up to 14,000 mm in length and weighing up to 60 tons available for editing. Your parts are painted or powder-coated in your desired color.
We develop innovative solutions using the latest 3D CAD / CAM workstations.
You determine the scope of delivery
We cordially invite you to our website for a tour of our operation.
Or get to know us in person during a visit in the Swabian Walked know an der Fils.
Founded
Employees
200 - 500
Certifications
Gingen
Germany - 73333
Founded
1990
Employees
50 - 100
Certifications
Hartmannsdorf
Germany - 09232
Founded
2009
Employees
< 5
Certifications
Keltern
Germany - 75210
ERGIN MACHINE PATTERN&CASTING Corp. is founded in 1978.
We are producing patterns for foundries,
We have 2 foundry, Casting non-ferrous and ferrous alloys.
We have a machining shop and a metal laboratory.
Founded
1978
Employees
20 - 50
Certifications
KAYSERI
Turkey - 38070
Find the ideal supplier in just 1 minute
Communicate directly with buyers
Unique market price comparison to realize the best prices
Existing processes, systems and suppliers can be easily integrated.
Buyers use the platform completely free of charge
