Impact Wrenches

The impact wrench Master 35 is the world for over 20 years in operation longer than any other gasoline powered impact wrench. He is reliable, powerful, has low maintenance cost and is extremely easy to handle. Ideal for loosening / tightening all the screws compounds. With plug quick-change drill chuck can also be used as a threshold drill.

SCREWS

»Nuts - square, hexagonal, octagonal
»Extenders
»Spacers
»Joints
»Spring retainers
»Rubber rings
»Steel pins
»Special shapes and sizes on request
»Safety quick-change chuck
»Emerging drill 10 to 22 mm diameter for hardwood
»Spezialschäfte and lengths on request

Rail crossbars

The rail Traverse telescope is designed for the transportation of rails and switches parts up to a length of 25.5 m and the installation of switch parts to R = 1200 with two-way excavators.

Sleeper laying trusses

The sleeper laying Traverse is a transport and placing beam for 5 concrete sleepers.When laying in 2 Absetzhüben the threshold distances of 600-750 mm are adjustable. The spacing of the hanger during loading amount to 300-375 mm.

Role Pliers

Track roller pliers SRZ 1 - In a strong-welded body replaceable ball bearing rollers are mounted. These lead the vignol at the bottom of the rail head. The clearance above the wheels 49, S 54, UIC 60 rails, among other things designed for the types S. The Track roller pliers SRZ 1 is recommended for use only by Umsetzböcken.

Track roller pliers SRZ 2 - The Track roller pliers SRZ 2 is intended primarily for the rail replacement with two-way excavators.

Rail transport Pliers

The rail transport gripper STZ 2 R is a stop means for holding and transporting rails of the type S 49, S 54, R 50 and UIC 60 The rail transport gripper STZ R 2 is approved by the Deutsche Bahn AG. The clamp is attached with shackles and a corresponding link.After striking of the tongs, the lever is folded, thereby securing the clamp against unintentional opening.
Upon release of the load and pliers, the safety lever must be turned over in order to open the pliers can. Working without slinger is not possible.

The rail transport gripper STZ 2 R - SB is a stop means for rail and switch parts. It is provided specifically for pressure-sensitive notch rails with plastic jaws that grip the rail head. The rail transport gripper is S 49, S 54 and UIC 60 and others whose head form is enclosed, suitable for transporting rails of the types.

The rail transport gripper STZ 2 R R 60 is a stop means for holding and transporting grooved rails. The gripper STZ Ri 2 R 60 is equipped with locking. The clamp is attached with shackles and one corresponding to the crane hook chain link. After striking of the tongs, the lever is folded, thereby securing the clamp against unintentional opening.Upon release of the load and pliers, the safety lever must be turned over in order to open the pliers can. Working without slinger is not possible.

Rail cars

The track roller is suitable for the transport of track construction equipment, tools and construction material. The track rollers are fully insulated in the wheels and ball bearings. The car has a push stick, which is also used to establish the scooter. The design of the rail roller is possible with grating or wood floors on request.

The equipment cart GWZ is a storage and transport assistance in railway works. He makes transport on construction sites as well as the proper and safe placement of th...