URBAN Metal was founded in 1982 as a supplier of the parent company URBAN GmbH & Co. Maschinenbau KG, based in Memmingen / Allgäu. Worldwide, the company employs approximately 650 employees.

In addition to supply parts for our main factory, we produce with our 110 employees in Austria CNC machining centers for the long part machining, bolting and produce all contract manufacturing parts both in wholesale and in small batches.

Cutting production:

Whether high-precision machined parts, weldments, sheet metal parts, aluminum castings or flame cutting parts, due to our high manufacturing depth and our well-equipped machinery, we are capable of all the parts for the highest standards, but to produce with short delivery times.

Motivated by the urgent need in our own production, we developed our CNC drilling and milling centers selbst.Mit much innovation and pioneering spirit arose among other things, our portal milling UP 10000 (image download).This self-constructed machine can handle workpieces up to a size of 10.000 x 2200 x 1500mm.
The experience gained thereby enable us this day special machines for special requirements as per customer to produce.

Products: (- produced individually> to customer requirements)

eg: consoles, machine stand, machine bed, cabinet, tool changers, cabinets, valve boxes, plates, tables, beams, tubes, machinery parts, flanges, covers, frames, mattresses, tabs, slats, rails, angles, pans, cylinder holders, clamping , switch plates, guides, supports, struts, allowances, plates, frames, brackets, fasteners, sleeves, cams, stoppers, clamping blocks, swivel feet, devices, etc ...

Locksmith:

With two welding robots and 8 manual welding stations we are well equipped to produce larger weldments. Our welders are certified according to EN 287-1.
Whether out of bent sheet metal parts, steel profiles or flame cutting parts up-we have everything under one roof.
Flame cut to 100mm thickness we can produce right in the house.
Our press brake can bend parts to a bending pressure of 110 t / m edit-which is about 12mm material thickness with a bending length of 4000mm.


Complete machining the following materials:

• Structural steel
• cutting steel
• Use of steel
• Heat-treated steel
• Nitrided
• Tool steel
• High-speed steel
• Wear-resistant structural steel (Hardox)
• Spring steel
• Stainless steel / stainless steel
• Cast iron
• Non-ferrous metals (aluminum, brass, copper)
• Plastics
• Fibre-reinforced plastics

Heat treatments:

Case hardening, stress-relief annealing, nitriding, hardening, plasma nitriding, carbonitriding

Surface treatments:

Zinc plating, nickel plating, chrome plating, hot dip galvanizing, powder coating, bronzing, anodizing, Teflonizing, plastic coating

• One Chic

VDL Industrial Modules is a contract-engineering and contract-manufacturing firm specialized in development and production of modules and systems for OEM's.

Development, Production and Assembly is all under ONE roof, therefor information- and knowledge sharing is optimised with all the benefits for our customers.

VDL Industrial Modules offers in-house application expertise in the field of "weighing, cooling/heating, positioning and design of frames and covering".

VDL Industrial Modules delivers to various market segments and produces small to medium series.

We would like to explore how VDL can be of service for you. Please contact sales@vdlindustrialmodules.nl or
call +31 492 50 58 00.

In modern CNC lathes all machinable materials can

• from Ø 0.50 mm to a diameter of 5.00 mm from the coil
• from Ø 3.00 mm to Ø 50.00 mm from the rod

be processed. Profiles such as 4-or 6-kant kant also are not a problem we have lathes and short lathes in use. We can produce your turned parts and nuts from the following materials:

• stainless steels such as 1.4104, 1.4301, 1.4305, 1.4307, 1.4404 ... etc.
• higher alloyed materials such as titanium, Hastelloy and Inconel
• heat-resistant materials, such as 1.4828 and 1.4841 ... etc.
• Brass and free-cutting steels

In the area of milling, we are also able to handle all common materials. Because of our machinery, we manufacture from pattern over small and medium series up to mass production. Here we can also count on machines with 4 and 5 Axis recourse.

All parts are cleaned in our Dürr wash and are generally delivered free of grease.

We are able to polish all geometries for you and are in the range of grinding and polishing of surfaces on the cutting edge of technology. We have this several machines.

We also work very closely with a neighboring electroplating together and can therefore offer you all the surface treatments, such as nickel plating, chrome plating, zinc plating, passivate, etc. .....

We specialize in housing sleeves and flat 6Kt. nuts made of stainless steel and brass for proximity switch and sensor technology. We manufacture the sleeves according to standard stainless steel 1.4305 and 1.4571 as well as brass in the dimensions

• M 5 x 0.5
• M 8 x 1
• M 12 x 1
• M 14 x 1
• M 18 x 1
• M 30 x 1.5
• M 32 x 1.5

Of course, sleeves and corresponding nuts with tank thread (PG) are no problem for us. Similarly, the corresponding accessories such as plug or adapter sleeves belong to our production program.

We supply the main dimensions with rolled thread, so that the sleeves have a perfect look. In addition, the threads have a greater strength and are thus not as sensitive. For other dimensions, such as M 30 x 1.5, M 32 x 1.5 or PG threads are chased the threads.

The corresponding flat 6KT -. Nuts

• M 5 x 0.5 x 2.5 mm or SW 7 SW 8 x 2.7 mm
• M 8 x 1 SW 13 x 4 mm
• M 12 x 1 17 mm x 4 mm
• M 18 x 1 size 24 x 4 mm
• M 30 x 1.5 36 mm x 5 mm
• M 32 x 1.5 size 41 x 5 mm

We mainly stock.

In principle, we produce all the sleeves as well as turning and milling parts customized according to drawing, but can miteinbringen wish our suggestions and ideas.

VIOSON PRODCOMIMPEX was established in 1996, as a joint-stock company with the headquarters in Braşov, Romania
SC VIOSON PRODCOMIMPEX SRL has the metal manufacturing as main object of activity and is structured in the following compartments listed hereafter.
Metal workshop
Provided with:
• Semi-automatic band saw
• Guillotine press for sawing bars and profiles of various dimensions (max. 40 mm)
• MIG-MAG welding machine, latest German Larch generation.
Splinting processing workshop
Provided with:
• numerically controlled milling machines with a cutting stroke of 800 mm
• numerically controlled lathes with a maximum capacity of ø140
• universal machine tools
Among the products developed, we name:
- sealing labyrinth systems and Nilos sealing ring systems, for the entire range of roller conveyors used in coal transportation;
- mechanically manufacturing of spring leafs, central screws and plate spacers for IVECO and MAN trucks;
- Fixing elements for parts used in the Austrian and German Railways ;
- Spare parts for technological equipment (ex. : clamping jaws for bull-block machines) ;
- Equipment upgrading elements (ex. : friction cone coupling for precious metal mill) ;
- dies and moulds of average complexity ;
- Packaging line (Roller Conveyor + Belt Conveyor) ;here we are responsible both for the design and for the execution of the packaging line ;
- specific pallets for textile spools transportation ;
- Aluminum castings;
- Excavator buckets repair;
- Grab buckets ;
- checking tables, spacers, engine flanges, reels , containers, callipers, check rings, jaws
- various aluminum parts machining,
Design workshops
Our engineers are working in CATIA and ACAD.
Based on design themes we can carry out product drawings and products’ work drawings.


We are open to collaboration in the profile described.

Vision Tech is a leading Dutch supplier of (fine) mechanical parts. Besides our workshop and logistics center in Schijndel we have a location in the Czech Republic (Bohemia Vision Tech) and a large network in Eastern Europe. This allows us to produce in the Netherlands and abroad with the great advantage that we can keep costs low.

We are a new company. I founded the company this year,2013.
Me and my son have more than 20 years of experience in the area of machining.
We are looking for work in the European market and we make parts according to customer requirement.
We currently have one milling machine and one lathe.
We can also perform chemical treatments browning. For treatments hardening, nitriding and anodising work with some companies with experience in this area.

The fixture Francis Gassner GmbH since 1990 (from 1990 to 2000 as fixture Francis Gassner) of the medium-voltage equipment, agricultural machinery industry, cleaning equipment, special machinery, automobile industry, auto to operate motorcycle tuning.

We manufacture to high quality CNC lathes and milling machines from prototypes to series production parts made of steel, non-ferrous metal and plastic.

Wärmebehandlungesverfahren and surface coating such as carburizing, nitriding, galvanizing, powder coating, anodizing, burnishing and are carried out by our long-standing, reliable suppliers.

* Electropolishing of Stainless Steel

* Techn. Hard anodizing of aluminum
* Chemically deburring of steel, aluminum and brass

* Gleam of brass and aluminum

* El.polieren and ink of titanium

* Galvanize

* Wage-intensive work such as grinding, polishing, pickling

Manufacturing and trading of technical parts