IN.CO.M. Srl is a family company based in Italy, in the Marche region, in the Province of Ancona. Founded by Mario Campolucci in the 60s, it was born as a small workshop to grow steadily to become a reference point for the construction of industrial machine components, semi-finished products and carpentry work in stainless steel, iron and aluminum. From sheet metal laser cutting to final treatments, through assembly and welding. In 2020 the company is managed by Matteo, Giovanni and Mario Campolucci (members of the board of directors and president) and is a long-term supplier for some of the major companies in the agricultural food sector and in various other industrial sectors such as the packaging industry , medical, chemical / pharmaceutical and special waste management.

Textile logistic and solutions. Trucks to load/unload warp beams and fabric rolls on looms. Winders and rolling machines

Dear Sirs, The tech group Genthin is an owner-managed family company whose origins can be traced back to the establishment of a company in 1990. At the beginning, Mike Pietrzak traded in automotive parts and accessories. The company's change to today's tech group was the result of economic changes. These were used through sensitivity and a helping of courage to realign oneself. After completing their training, he began to involve his sons in the company. They should continue the traditional company and raise additional pillars. In 2016, the family's business acumen proved to be correct once again, and the market expansion in the industrial and energy sectors was successfully accepted. The Genthin tech group with 50 employees is now known throughout Germany in certain industrial sectors. The number of employees is increasing steadily and thus the company is broadly positioned in the trade and industry in the highest quality. The areas of application of the subsidiaries are divided as follows: Moto-Tech Genthin GmbH, Am Kröpelberg 2, 39307 Genthin - CNC processing according to drawing (with or without certificate) as well as special, individual and series production (travels: X1060, Y600, Z600 mm / table sizes: 1200x600 mm) - mechanical processing / contract manufacturing (turning, milling, honing, surface grinding, point grinding) - Repair, maintenance and repair of internal combustion engines (e.g. Deutz, CAT, MAN, Mercedes, Hatz, Kubota, MWM etc.) - Procurement of spare parts and replacement engines - Radiator cleaning and repair Service-Tech Genthin GmbH, Parkstr. 6, 39307 Genthin - Maintenance + repair of industrial equipment and engines - Troubleshooting - Container and plant construction (all materials) - Stainless steel welding and apparatus construction (as a subcontractor with CL1 certification) - Complete support of CHP and emergency power systems Elektro-Tech Genthin, Parkstr.6, 39307 Genthin - Electrical installation in residential buildings (conventional and smart home) as well Industrial and government buildings - Electrical installation, maintenance and repair of automation technology - Electrical installation / repair on industrial plants and vehicles - Equipment check (stationary and mobile) - Generator and electric motor maintenance as well as repairs (external) - Supervision, installation, retrofitting and maintenance of street lighting KFZ-Tech Genthin GmbH, Am Kröpelberg 2, 39307 Genthin - vehicle repair - Painting of industrial furniture and automotive parts - tire service - bodywork - Spare parts trade - TÜV and AU - insurance benefits - Vehicle fleet service for larger companies (with provision of a Workshop replacement car tailored to the corporate customer) All companies in the Genthin Tech Group are DIN ISO9001 certified and, despite their large number of areas of application, have a flat hierarchy.An operations manager or deputy is available to you as a contact person and specialist for each area. The accounting of all companies is organized jointly by the tech group. Our management is at your disposal for business matters. Partnership relationships as well as individual projects are gladly handled and maintained together with operations managers and the management. If you are interested in our group of companies, we would be happy to speak to you personally. You are also welcome to obtain more information on our website www.techgruppe-genthin.de. Wit...

Welcome to ATG Automation helps companies to design processes in manufacturing, logistics and quality control more efficient. ATG, automation Count designs, manufactures, installs and services individually tailored automation solutions for and in companies from various industries. Customers from mechanical engineering, automotive suppliers, companies from the food and pharmaceutical industry, agriculture and many more from the manufacturing and processing industries use according to requirements designed ATG automation solutions to increase efficiency and quality. A team of 26 highly qualified and experienced staff creates custom part and complete solutions, customized, extended, modified and regenerated existing plants - always focused on a trusting and long-term successful partnership with our customers.

Karl Ruhl Maschinenbau GmbH was founded in 1983 by its current Managing Director, Karl Ruhl founded as a sole proprietorship. Steady growth and continuous structure required in 1987 the use of CNC technology. In 1991 a new production hall was built, which was commissioned in November. Currently 8 qualified employees. Karl Ruhl Maschinenbau GmbH, production partners and suppliers demanding machine components, precision parts and special machines. An efficient, economical and high quality production requires high precision in all production stages. We consider the full range of CNC turning and machining technology available and are thus in a position to even complex parts economically, precise and inexpensive to manufacture. Our specialty: Production of individual parts; series parts, including all materials in steel, cast iron and non-ferrous metal sector. Production of machines and equipment according to your design and manufacturing drawings or documents. Meaningful integration of the entire production field, a good business organization CAD systems with integrated NC programming, DNC operation and the latest manufacturing technologies from leading manufacturers of machine tools and the use of advanced editing tools enable a very high-quality and effective production. Quality - punctuality - Cost effectiveness - performance be with us in one hand and the basis for the delivery of small and medium series of the highest quality at excellent conditions. From a simple part to complex requirements.

Feweta - Precision is our passion As experts in the CNC machining technology construct-ming, manufacture and assemble mechanical components for the electrical and electronics industry as well as machine parts for machinery and equipment, fixture and prototyping. We are your service provider and problem solvers around the machining. For over 30 years we serve the manufacture of milling and turning parts and technical engraving from planning through production to the finished part or fully assembled module. If necessary, we also realize the construction according to the specifications of our customers. Even extraordinary claims are us a welcome challenge We maintain a sustainable communication with our customers to achieve with competent advice and individual execution of orders the highest possible performance. Our strength is the combination of optimally-trained staff and the use of modern CNC machine tools.We are an experienced team of 10 qualified professionals in the turning and milling technology. We work with high expertise in metalworking and understanding of the technical and quality requirements of our customers. Through training and regular training we keep our high level of expertise in the field of CNC-based machining and metrology and quality assurance up to date. We always try to be one step ahead of the prior art. This enables us to produce precision products in cost-effective processes. Materials, tools, machinery and processing procedure are coordinated on the basis of high professional competence and many years of expertise in the manufacturing process optimally. To this end, we have a comprehensive modern machine park. CNC turning for the highest standards: By manufacturing on modern CNC machining centers supplemented by conventional lathes, we can cover a very large machining area and a wide range of applications. CNC milling with up to 5 axes For the CNC milling of materials such as steel, aluminum, brass or plastic are available according to requirement 3 - or 5-axis machines. For the preparation of special forms, single pieces or prototypes conventional milling tool additionally be used. Technical engraving The use of CNC engraving machines enables us to flexibly, quickly and accurately translate customer requirements. We made the house components can be engraved according to drawings, samples or DIN data. Examples of our technical engravings are the front panel labeling, manufacturing of nameplates and the marking of parts with date or batch number for identification in the warehouse or material flow.

The CIERRE company was founded in 1970 and has grown to around 95 people. CIERRE is a Subconctractor for the Design and Poduction of Electrical, Electronic and Electrical Equipment. Also services such as the supply of materials; management of the customer’s Material Deposit at us. Links with the Customer’s ERP software. Cierre has a Commercial office, Purchase office; Technical office; R&D office; CIERRE performs Design and Construction of: 1---elektronic, electrical, electrical, equipment (apparatus); 2---wiring of traditional and SMT electronic boards with lines of 30.000 components hour. 3---cables; wiring of single cable; multi-pole cable; SPEVIAL; RESINATED; MOLMED cables; according to customer’s design; signal cables on board Pre-Shaped, with a high number of conductors and then TESTED; power cables up to 240mmq; cables from 0,12 mmq to 180 mmq; flat cables; 4---assembly of POWER electronics; on panels; in cabinet; groups; sub-groups; power semi-finished products; UPS units; Inverters; Power supplies; converters. 5---all about customer specifications and requests; even RHOS. 6---CIERRE is a TUV Certified Sub-contractor ISO 9001; ISO 14000; UL cables.

In our main company headquarters in Germany (Viersen) is our administration, sales, development, production and assembly. In addition, we have a production site in China (Ningbo / south of Shanghai). In recent years, Groschopp has progressed from a manufacturer and supplier of motors and drive components to a provider of drive solutions. As Tier-One supplier for large OEMs in mechanical and plant engineering, Groschopp also designs, produces and implements complete plug-and-play solutions. No matter whether you require standardized or completely customized solutions - we accompany you from development and design via prototype construction and subsequent testing, up to assembly and series production.

Production profile Industrial service providers and manufacturers of capital goods • Development, design, manufacture, assembly and commissioning of components or complete systems according to customer requirements • Individual solutions with exact Manufacturing accuracy • Repairs, maintenance, conversion, implementation, expansion of existing machines and systems • Industrial service • Compressed air technology / service (specialized in KAESER compressors) • item pluspartner • Arms manufacturing license Main profile • Special machines, systems, aggregates and components for the capital goods industry • Filter systems for particle filtration • Container construction • Steel construction • mech. Machining workpieces • Refurbishment and revision of drilling and construction machines • Precision machining in automatic construction down to the zero dimension range • Production of weapon parts and complete weapons • Tool making • Production of analog film production systems Services etc. • technological steel construction • Assembly services for all chemical, pharmaceutical and production engineering apparatus and plant engineering • All types of welded structures • Profile construction • Aluminum profile construction • Industrial services • Maintenance, inspection and servicing of mechanical equipment • Tool repair (grinding, sharpening) • Repair of film and photo technical systems

Familiar like the department next door. Toll manufacturing with in-house manufacturing. Thanks to our close network of local partners, we are able to offer a far-reaching technological spectrum. We take over your labour-intensive assembly tasks and test systems individually. Excerpt of our services: 1 Manufacturing by machining, bending/edging, laser cutting, welding 2 Assembly of components, assemblies, mechatronic systems 3 Process simplification through sophisticated procedures, simplification of the supply chain law, reduction of the throughput time from the idea to BANF.

For over 40 years, we have been manufacturing adapters for “end of line” test benches, high-voltage contacts (HV), complete systems, test cable harnesses, etc. Our customers include almost all well-known automotive and truck manufacturers worldwide as well as their strategic suppliers. From manually locked test benches to fully automated test benches for EOL testing, our adapters and our patented technology for tolerance compensation for small miniature test plugs can be used for testing processes up to millions of times. From consulting and feasibility research to 3D design, 3D prototyping and individual and medium-sized series production, we offer our customers concentrated experience and expertise.

VKE GmbH & Co. KG is based in Heidenheim near Ulm and is managed by the managing directors Valentin Klöpfer and Alex Ziegler. The company was founded in 2014 and specializes in the development and sale of innovative, customer-specific solutions in the areas of industrial automation, special machine construction and plant construction. VKE is also a reliable partner in the area of CNC parts production. The company is certified according to DIN EN ISO 9001: 2015 and, in addition to its headquarters in Heidenheim, operates another branch in Iggingen. The offers are aimed primarily at the automotive industry and its suppliers, as well as customers in the fields of process engineering, aerospace technology or the electrical and / electronics industry. Your advantages: -Personal care by a contact person for all services -Short decision-making, fast and flexible -Complete solutions from project planning, construction, manufacturing, assembly, Commissioning up to the training of your employees -Experienced and committed employees -Great vertical integration and lean processes ensure short delivery times -Excellent product quality and high delivery reliability On its website, VKE GmbH & Co. KG offers its customers and visitors detailed information about the company and the products and services offered.

Sächsische Walzengravur GmbH has been producing high-quality rotary printing and embossing forms since it was founded in 1890. In addition to engravings for gravure, flexographic and screen printing, we also offer steel cores as well as a large number of technical rollers and services through our own cylinder production.

EKOFLEX GmbH offers development, construction and production from a single source. We offer individual advice and planning in the field of system technology and optimization / adaptation, as well as special machine construction and tool construction. Our manufacturing skills in contract manufacturing include 5-axis milling, 2 1/2 / 3 D milling, welding and assembly.

Fischer sees itself as a competent partner in all questions of mechanical engineering. No matter whether design and manufacture of special machines and systems or the manufacture of machine parts in individual pieces and series. Our grown know-how, highly qualified employees and a modern machine park are the prerequisites for optimal quality and absolute reliability. Assemblies as well as complete special machines and systems are assembled in our assembly hall. Fischer demonstrates competence in mechanical engineering. Tailor-made tool systems for highest precision and constant quality are of crucial importance. With state-of-the-art machinery and qualified employees, we are valued partners for our customers in solving problems. Service - for tailor-made solutions.

The PHOENIX tooling GmbH is high vacuum technology as a service-providing tool and mold as well as manufacturers of precision parts, assemblies, special machines and Equipment supplier to the national auto industry, medicine and household appliances, machine and plant construction, as well as steadily growing, and the solar and solar industry.

Milling We can produce unique or serial parts with our DMU 50T CNC milling machine and SolidWorks CAM software. We are also able to modify or rework existing products. Maximum size: 500mm x 400mm Turning We have a conventional Optimum TH 3309 turning machine to complement the milling operation if needed. Laser engraving We can engrave and cut laminated plastic materials with a 40W laser engraving machine. It can be any shape, text or picture according to your needs and imagination. Maximum size: 280mm x 180mm Material type: smooth or metallic brushed type Measurement We own a Platinum Faro Arm 8', with 1,7m granite table inside climatized measurement room. We are able to perform measurement for our own gages but also for our customer parts (simple dimensional measurements, normality study, Cp/Cpk...). In association with our design skills, we can also do reverse design to create model according to part measurement. Measurement range: 2.4m

Automation systems from Soldati AG are always custom-made and are used wherever conventional machines - for whatever reasons - are not or no longer sufficient. Specially built Soldati machines do their productive service in many renowned companies around the world. And we are sure that you have already held one or the other product in your hand that has run through a Soldati machine. Banknotes, for example! The Kinegram on it is processed with a Soldati machine. Or a Milka chocolate. Thanks to Soldati, this is presented in an attractive way. Whether thresholds for SBB, herb butter for Coop or water filters for Nespresso - Soldati automatically makes production easier. The industry demands more and more special solutions, rationalization and new product ideas. We are happy to comply with this request. With visionary solutions, with bundled know-how, with the highest level of professionalism and state-of-the-art technology. And of course with employees who achieve great things in a team and know how to develop special machines and assembly systems that are unique and always tailored to the most individual wishes and requirements of our customers. Always. Because we think along with you. Automatically. Right from the start.