Technical Trading Dreh-/Fräs-und for sheet metal parts

KALİBRE MAKİNA TAAHHÜT TİC.LTD.ŞTİ.
Köseköy San.Sit.M Blok No: 248 ZIP: 41250
Kartepe / KOCAELİ / TURKEY

Tel: +90262 373 52 52

kalibre.mak@hotmail.com

For over 30 years, we deal with the editing and production of finished precision parts from all common materials, and components and complete devices.



After we have expanded our machinery continuously over the years and modernized, we are now able to offer a very wide range of processing options in the field of machining precision parts manufacturing.



Our small, medium and large series production covers an area 3-65 mm diameter of the rod in complete machining (Axial - radial and tool support) as well as the range up to 600 mm diameter in food processing.



We manufacture according to your drawings or samples in batches of 10 pieces, including patterns and 0-series, to 100,000 units.



For over 20 years we have manufactured parts for rotary connector systems. Our manufacturing facility in this area has been designed according to the requirements for the production of such parts.



We offer our customers the opportunity to purchase fully pre-finished parts, including surface treatment, assembly of components to form units and a customizable delivery, tailored to further processing. We have carried zoom requirements, evolved in this area in recent years, according to our customers Interressenten and strengthened us to a system supplier.



Devices, special tools and special equipment are coordinated and adapted to the particular processing task, created by ourselves, so that a possible production to optimum, efficient and economical points of view can take place. For the control of these special facilities we have collected from the use of freely programmable PLC controls extensive experience and knowledge of the use and programming of such.



A computer-aided quality management system, we have installed and are thus able to document inspections during production.



We try to meet the different requirements and demands of our customers to be able to fulfill in every respect.



The parts manufactured by us find application in diverse industries. Essentially, these are the automotive industry with its direct suppliers, the electronics industry and switchgear manufacturers, producers of aggregates and systems for gas and control technology and the general mechanical and plant engineering.

Production of simple to complex CNC short and long turning parts, and chuck parts up to diameter 300 mm with modern equipment (since 2008, for example. Multifunction turning center OKUMA MAC TURN!), V2A and V4A are our strength but also cutting steel, aluminum and brass .. .

Batch size 10-100000 pcs

Milling on machining center to parts of size 500x500x500 at low prices from 10 to 10,000 pcs. Lot size

MUZ designed according to customer's requirement machinery, special purpose machines and implements its implementation to the final product or system as a complete package.
Due to the family-related Locksmith, we are also able to customize welded structures quickly and kostengünsig.
The bodyshop directly in the annex building permits without long transport routes to paint the machine components.

Our strength is flexibility and performance!

At this point you will get an overview of the company MUZ mechanical engineering and machining:
Design, planning and manufacturing of lathe parts, short lathe and CNC lathe and CNC milling parts are our core competencies.We are able to manufacture both prototypes as well as large production runs reliably and on time.
We build your machine, system, or like to only your module completely incl.all units, electrics, hydraulics and pneumatics.
Through our incredibly powerful machinery we are able to also realize your machines, special purpose machines, systems or assemblies quickly.

Come to us if you are around a professional partner ...
Require milling parts, CNC machined parts, Aludrehteile, aluminum turned parts, turned parts, short turned parts, CNC turning parts, dental machining parts, stainless steel turned parts, deburring, glass fittings, glass canopies, plastic machining parts, Grinding parts, point holder, lathe parts, glass fittings, glass point fittings, stainless steel end caps and machining.

Our knowledgeable staff look forward to your wishes and ideas. Do you need high-quality services, a sustainable service, expert advice and an easy and cost-effective processing? Come and join us, your MUZ engineering and machining, YOUR STRONG PARTNER.

We, the company “MWU”, produce high-quality CNC turned and milled parts on behalf of customers according to standard and customer drawings.
The main customers of our company are from the fields of mechanical engineering, intralogistics, agricultural machinery, equipment and apparatus engineering, etc.

After many years of experience in drive technology and gear construction, Net-Components GmbH was founded in 2003 by Dipl.-Ing. Tarkan Peker. It is a DIN EN ISO 9001:2008 certified company.

With our knowledge of the international market and with the goal-oriented way of working, we always strive for market-driven and customer-oriented solutions.

The execution of complex tasks in series production, medium and small series production, as well as prototyping is carried out on modern machining centers, which guarantee a consistently high quality and flexibly realize customer requirements.

We are able to make short-term as well as long-term investments depending on the order situation and thus secure the production with regard to quality, deadlines and prices.

One of the company's principles is to manufacture our products economically using safe and environmentally friendly processes and to meet high quality standards. Our striving for constant improvement and cost-effective production leads to the competitiveness of our customers.

We offer:
- Turned parts
- Milled parts
- Forged parts
- Complete assemblies

Small or large series

Special machine construction

We are NWK TECHNIK, providing professional CNC services since 2020. Our advanced capabilities include:

CNC turning
CNC 3-axis milling
CNC 5-axis milling
Cutting in the 0-400mm range, including tubes and thin-walled profiles
Plasma and laser cutting
Water jet cutting
Welding

Thanks to our modern machinery and experienced team, we are able to meet even the most demanding projects. Our company emphasises excellence in precision and on-time delivery, providing customers with the highest quality services.

We work with both B2B and B2C clients throughout Europe. Our services are tailor-made and our flexibility allows us to adapt to the individual needs of each client.

We invite you to work with NWK TECHNIK - your trusted partner in precision CNC machining.

Albert Nowak
Owner

We are a small family business that was founded in 1995. Currently, six people are employed by us. Our core competence is the mechanical processing of metals on CNC machines:

* Rotate
* Automatic turning (bar)
* Long-turn
* Polygonal / Umrunddrehen
* Teeth
* Milling

Our products are used:

Apparatus
* Auto industry,
* Railway industry and Schin vehicle
* Hydraulic us pneumatics industry
* Mechanical engineering
* Paper and printing machines - (rolling diameter from 10 mm to 2000 mm in length)
* Control technology,

* Integration of the verschieder axes

OFARTECH is the trademark of Karabudak Metal LLC.

In 2010, We have get into CNC Machining service by producing customer-specific parts in the automotive, hydraulic and agricultural sectors. In 2016, We started to produce hot forging parts for the agricultural, automotive and hydraulic sectors and have also been providing CNC services in the defense industry since 2018. Our main production technologies are milling & turning and hot forging. As an additional technology, we have zamak alloy injection.

We also offer design and analysis services with our expert engineer staff. These services include detailed design (special machines, fixtures, apparatus) and structural analysis & optimization solutions. We have experience in providing special engineering solutions (cost reduction, technical feasibility, test system design) depending on the customer's request.

Our company has produced many qualified products and projects with its experienced and technical staff and constantly improves its product and service quality.

Since our establishment, we have been the guarantee of providing experience, validity and reliability to our customers.

Our basic principle is to deliver our commitments in a qualified, complete and timely manner, and we work with a focus on customer satisfaction by constantly improving all our necessary infrastructure, materials and quality processes for this purpose.

OFARTECH by Karabudak Metal LLC

OFFICINE AIOLFI Srl is an Italian company specialized in machining process of Turning, Milling, Drilling and Taping using modern and top class machine tools.

We are well equipped to machine medium and big series starting from the bar or from casting products or froging products.

We have expereince in suppling different market fields in particoular Automotive, Pneumatic, Oil-Hyraulics, Electrical and Electronic.

Officine Aiolfi normally serves the following sectors:
Hydraulics - Pneumatics - Electromechanical - Automotive - Household appliances - Gas - Other types

We are able to provide the following processes in-house:
Turning from bars from Ø 2 to Ø 65 mm - Standard turning up to Ø 350 mm - Machining centre processing of 600 mm cube - Transfer machining - Ultrasound washing - Cutting - Rolling - Tumbling - Insertion of bushes etc. - Wire, Electrode and Argon Welding - Painting - Mechanical assembly work

Materials processed:
Aluminium, Alloy and other steels, Stainless steel, Brass, Copper, Inconel, ETG 88, Teflon

Lot Types:
Prototyping, Pre-industrial, Mass production (medium and large lots)

Through carefully selected suppliers, we are able to supply:
Grinding - Heat treatments - Galvanic treatment - Nitriding - Special rolling processes - Slotting - Broaching - Electron discharge machining

The company Officina Meccanica Bruegger srl (OMB) is situated in Como, a strategic point between Milan and Switzerland. For two generations OMB is specialized in the production of high-precision mechanical parts. Thanks to the continuous development in the production and engineering OMB has a complete and modern production and offers a complete service:

Our services:
• Design and Engineering of new high-precision mechanical parts.
• Realising of prototypes and samples
• Production of series
• Different surface finishing’s of the parts
• Assembling according to customers specifications
• Testing according to customers specifications

In the Engineering we use following Cad/Cam Systems: ProE, Soldi Works, Rhino, Sum3D und Pacw.

The drawing can be sent in following files: dxf, dwg or iges.

In the production we use metal and plastic materials as for example:

METAL
• iron
• stainless steel
• brass
• cupper
• aluminium
• Hastalloy
• Monel
• Other alloys

PLASTIC
• PVC
• POM
• PP
• TEFLON
• PEEK
• VESPL
• PC
• PA
• Plexiglas
• Reinforced and not reinforced plastic materials
Of course we organise almost all surface finishing’s on request:

HEAT TREATMENT
• Hardening
• Cementation
• Nitriding


SURFACE TREATMENT
• Anodizing natural and coloured
• Hard anodizing
• Galvanizing
• Chromium plated
• Alodine
• Nickel plated, electrolytical and chemical

OMGM is a group of companies founded in 1972 near Bologna: the company specializes primarily in machining (turning and milling) but also in machine assembly.

The company ONIKS Ltd was founded in 1991. and is 100% privately owned. Currently we have employed 70+ highly qualified, motivated and trained workers.

We are recognized as a reliable partner of companies all over the world, whath motivates us for additional investment in our solutions and constant investment into the new technologies and our employees.

We are focused on exporting to the countries of the European Union (Germany, France, Belgium,...), European countries like Switzerland, and also to the domestic market.

With our employees and machinery, we can create products for the most demanding customers.
The production is based on the development and processing of metals and plastics with lathes, milling machines, grinders, CNC lathes, and CNC milling machines, water cutting, and high standards of output quality.

Our services range from machining accompanied by modern quality
assurance to customer-specific solutions with various finishing methods.
With the inclusion of partners our team undertakes the complete
production, finishing, quality assurance and delivery process for our
costumer.
Thanks to our comprehensive machinery and our qualified employees
we are in the position to satisfy the needs of our customers
in an effective, fast and lucrative manner.
Consistent controlling of all incoming material and tool deliveries
with continuous inspection during production and
a strict outgoing goods check assures impeccable delivery.

As an innovative, long-established and future-oriented company
we are successful since over 55 years and able to satisfy the individual
needs of any industry sector.

Based in Hamberg in the north of the black forest we produce for and
deliver to all of Europe and beyond.

As an innovative, long-established and future-oriented company
we are successful since over 55 years and able to satisfy the individual
needs of any industry sector.

Based in Hamberg in the north of the black forest we produce for and
deliver to all of Europe and beyond.

Machining company with 50 cutting machines and an affiliated locksmith shop.

Rotate:
Long and short turners up to 32mm
Turning and milling from bar to 90mm with AGW
Turning and milling of inserts up to 300mm with AGW
Milling:
3-axis, 4-axis and 5-axis milling machines

Sheet metal processing:
2D laser cutting in large format
Laser tube cutting

welding work:
MIG/MAG, VIG/TIG and laser welding