Metalworking

As a supplier of medium and large companies in the metal industry, we enjoy a good reputation through accurate and timely implementation of specifications. We manufacture products of the highest precision with our modern machinery in small or large series of bespoke or as a system solution: turning, milling, drilling, bending, welding, plasma and oxyfuel cutting, fixture, special designs.

Save money!

Save money in the awarding of contracts to sheltered workshops according to § 71 SGB IX

Companies employing more than 20 workers are required to pay a compensatory levy in the event that they do not employ recognized severe disabilities in their operation. The employment rate for these companies is 5%, ie every 20th Employee is to be a recognized severe disabilities. The countervailing charge is for any unused space requirement depending on the level up to € 3,068 per year.

In addition to the employment of severely disabled approved, you can get rid of the payment of such compensation levy by the fact that you subcontracted approved workshops for disabled people. In this case, you can deduct 50% of the invoice amount that relates to the job performance of people with disabilities, on your levy.

An example:

You place it in a recognized workshop for disabled people a job with an invoice amount of € 2.000, -. The labor cost per unit of this contract is € 1.500, -. Of these, € 1.500, - You can deduct 50% of the countervailing charge, so you € 750 - can be saved.


Processing options:

CNC-Dreh/Fräsbearbeitung area:
1) Mazak QT Nexus MS 250, launched in 2008, driven event center, counter spindle
Turning diameter chuck parts: 10 - 300 mm
Turning diameter rod: 10 - 70 mm
Turning length: max.450mm
2) Mazak SQT 100 MY + Iemca bar loader, launched in 2001, Y-axis, Iemca-bar loader
Turning diameter rod: 4 - 40mm of rod
Y-axis: +-40mm
Turning length: max 300mm
3) Mazak SQT 200 M, launched in 2001, driven WKZ, LNS bar feeders
Turning diameter chuck parts: 15 - 200 mm
Turning diameter rod: 5 - 50 mm
Turning length: max. 500 mm

CNC-Fräsen/Bohren/Gewinde:
1) Mazak VTC 20B, launched in 1998, 24 WKZ, IKZ
Machining Dimensions: max. 500x500x1100 mm
2) Fadal VMC 1500 XS, launched in 1998, 20 WKZ
Machining Dimensions: max. 400x400x700 mm
3) Deckel FP4, launched in 1989
Machining Dimensions: max. 400x300x600 mm

Automatic saws:
1) Bandsägeautomat MEP Shark 280 SXI, launched in 2001
Sawing flat: up to 300 mm width, 250 mm height
Circular saws: up to 250 mm diameter
Length up to 1500 mm single cut, infinitely short cuts from 6m length
2) circular saw Berg & Schmidt VKS 350, launched in 2001
Sawing Flat: 100 - 100 mm
Circular saws: up to 120 mm mild steel, max.80mm stainless steels
Length: up to 1000 mm single cut, infinitely short cuts from 6m length

These diverse standard machines such as drill presses, lathes etc.



Mürwiker workshops GmbH
Commercial building 4
24955 Harrislee
0461 770069
0461 7749107

We are a performance-oriented and modern supplier operating for prototyping, single part and small batch production. We specialize in the production of turned and milled parts.

You set high standards for quality, performance and timely delivery?

With innovative technology and know-how fachkompetentem we stand for reliability and exceptional quality execution of our orders.

It is individual customer service and careful, optimally tuned handling of orders as guiding principle. We take enough time in the job definition. You feel reliability from the first moment.

Production of turned and milled parts in the Czech Republic. We deliver inexpensive small and medium series thanks to collective transport. Quality assurance on site. Delivery time: 4-6 weeks
Active for the Swiss machine industry for 25 years, high quality standard.

M u T

We bring for you metal and technology together!


We combine our years of experience in the metal sector with production technologies in the STAMPING, PUNCHING NIBBLING, TURN, PULL, LASERS, FLAME CUTTING AND MACHINING. Incl. of all known surface systems.

Flexibility and high efficiency, we provide you with small and medium batch sizes.

We are pleased to be able to introduce our performance on the following pages.

We are available for a personal interview.

Please get in touch with us.

We supply products made of steel, stainless steel and non-ferrous metals.

• Stamped parts: 0.5 mm to 20 mm thickness
• drawing & bent parts: in all ductile qualities and strengths
• Laser Parts: St to 20 mm thick, VA to 15 mm thick, aluminum up to 10 mm
• Rotating parts: from the rod or rotational parts
• Cut Parts: up to 50mm thickness
• manufacturing technology combined components
• Modules: completed consisting of punching, turning and milling parts finished to your specifications in 1/1000 mm range
• Special profiles: in all ductile qualities and strengths
• Raised floor - accessories program for heavy load

The economic optimum production process depends on the needs, the required accuracy and, if necessary, by the requested delivery date.

Our customers come from:
• Construction Industry
• Heating Industry
• Agriculture
• Automotive industry
•

Our customers value us as a reliable and versatile partner. We are also happy to take on major challenges and support your project or production part with a great deal of know-how, as well as a high level of quality and cost awareness.

We provide you with precisely machined components in turned, milled or cut to size. On request, we carry out preliminary work such as chamfering, planing or deliver semi-finished products in the form of round bars, plates or tubes.

In addition to ready-to-install machined components, which we produce for you using all common manufacturing processes, we offer a wide range of semi-finished plastic products. If required, we deliver plates, rods and tubes* either ready to manufacture or with the desired pre-processing such as sawing, planing (up to 4 sides simultaneously), profiling, chamfering, etc. Thanks to our decades of experience, we are the right partner for almost every task in the plastics sector.

We are an ansa essiges in Manisa Turkey Company. We make with and without robot Automatiserung, series production with robots and CNC turning and Fraesteile in small and large series.
We also make steel construction and mechanical engineering including automation.
We have 1000sqm and 500sqm open Closed Area.

MVR Metaalbewerking

MVS supplies mechanical customized components for the followings sectors:
- Torches and other components for cutting and welding equipment
- Taps and valves for drinking water
- Fluid control and measurement (valves)
- Fittings for pneumatic
- Components for high pressure washing machins

Our production plant is located between the Black Forest and in the immediate Hegau
Proximity to the motorway A 81 singing - Stuttgart.

MW-turned parts is a Präzisionsdreherei with tradition, and may on over 30 years
History look back.
Are manufactured ready for installation of rotation - and milling parts and customer specifications on modern CNC machines and conventional machines curve in small and medium series.

For surface treatments such as hardening, grinding, burnishing, galvanizing, chrome plating, etc
We have carefully selected and reliable suppliers in our area.
Since 2004, we also offer in addition to semi-automatic slot - and Milling Machines
Wage work on. They place their "semi-finished" turned parts for disposal and we mill
them slots and key areas according to your wishes.

Our production is subject to constant monitoring during production.
Is measured with modern measurement equipment according to various methods.
The measured values can be determined in both digital and visually using a microscope and projector. Also suitable test equipment such as calipers, micrometers, and other
longer used.
On request, we also provide sample test reports with test pieces from the current
Production from, or we put our supplies material certificates and hardness - or
Electroplating protocols at.

As a medium-sized company, we calculate on a fair basis and provide our
Customers depending on the distance to the hotel's own transport vehicle, or a
Parcel service or for substantial orders with a shipping company.
Routing orders and / or transportation needs of the customers can be considered.

As a supplier of a wide variety of industries, we are also looking forward to your inquiry, the
we will respond promptly.

“To modify parts withdrawn from mass production to customer-specific requirements in order to offer the company the opportunity to deliver customer-oriented goods. ”
With this idea, Mike Weinbrenner founded the company MW-Industrieservice Präzisionsdrehen in 1996 in his local garage in Weitefeld. Due to a rapidly growing volume of orders, Weinbrenner changed its location in 2003 to its own production hall in Elkenroth.
Here, the company also specialized in precision turning.
“We produce small, small and large batches of precision parts and we support companies with manufacturing, manufacturing processes and assembly. ”
Thanks to the optimal use of 7 to 10-axis controlled CNC lathes and a short turner with bar loading magazines and high-quality tools, we are able to produce parts made of stainless steel, free-cutting steel, brass, copper, aluminum, plastic and special materials. The turned parts are in the diameter range of 2 to 42 mm.
Within this area, we also supply parts made of hexagonal and square material. The length of the turned part can be up to 900 mm. Through transverse processing, the workpieces can also be produced with desired thread types, cross holes, grooves and milling surfaces.
On request, your turned parts can be laser marked or machined on our CNC engraving machine.
The precision parts are separated from the coolant oil by the cleaning system so that the workpieces are delivered oil-free. Through the use of tooling devices and carefully thought-out production processes, our team is able to deliver quality and timely work.
The quality is also checked on our optical measuring devices. 100% testing is possible upon customer request.
Individual processing of the manufactured parts, such as grinding, galvanizing, chroming and hardening, is carried out by our experienced suppliers and can be delivered with a test report on request.
Combining, assembling and completing elements to form an assembly is also possible.

Basically, our goal is to open up to new manufacturing processes so that we can always offer precision work.