Find specialized suppliers for automatic turning on Techpilot. Our platform offers access to suppliers who manufacture precise and complex turned parts in series production. Benefit from comprehensive market transparency and optimize your supplier selection.
The Saxonia Precious Metals GmbH is since the beginning of the 17th Century in the Freiberg region existing tradition of mining and processing of precious metals continues.
Already in 1612 the "hut on the Halsbrücker Spat" was founded.
1663 "Halsbrücker smelter" by the Saxon Elector was taken. Later it was renamed the "Royal smelter".
1861, it was then launched the gold refinery neck bridge.
Today, presents former subsidiary of Deutsche Nickel AG Technology Group in the core areas of precious metal recycling and processing as a recognized and reliable partner of the user industry. Modern and environmentally sound facilities, innovative products, motivated and experienced staff and a quality management system according to DIN EN ISO 9001-2000 document the performance and competitiveness of the company.
The Saxonia Holding consists of four manufacturing companies at two locations in Germany.
At the site Halsbrücke about 200 employees, and at the Pforzheim location employs about 150 workers.
Products from precious metals: Semi-finished products, chemicals, recycling, contact and parts
Alloys: Ag, Au, Pd, Pt, Rh, Re, Ir + base metals Cu, In, Ni, including
- Round wires
- Flat and profiled wires (after drawing)
- Rods and tubes
- Sheet and strip
- Targets
- Anodes and salts
- Weld-on and Auflötkontakte
- Assembled contact parts, welded, soldered or riveted design
- Contact bimetals (deposit and support profile semis)
Founded
-
Employees
500 - 1000
Certifications
Halsbrücke
Germany - 09633
Dear Ladies and Gentlemen,
the SBF would be like to introduce as a supplier in your home.
Our company is a supplier of workpieces, which are produced by Cutting production. Due to our flexible production and employed there highly skilled employees, we are able to single and serial parts and assemblies to produce timely and economically.
Delivery program:
Piston bushings bushings washers rings valve seats screws cone spool pipes sleeve shaft axis hub plug valve spring retainer pin roller bolt nozzle mandrels aperture spindles mandrel sleeve cover assembly Bock valve plate table threaded plate connecting pin torque arm gear sandpit spacer door shaft clamping tube pump housing gear holder electrode 3D shape mold cap switch shaft piston Rollenflanschplatte flange Supporting tube roller bearing sliding bush buoy float design light
We will gladly process your rush order! We are certified according to DIN ISO 9001 and 14001.
Machine list - The following machines are available:
Milling machines:
Heidenhain TNC 426
Travel: X1000 Y600 Z500
Tool changer 40 - Trade
SK40 drive power 23 KW n = 8000U/min spindle cooling
Table load up to 1000Kg
Heidenhain iTNC530
Travel: X1000 Y600 Z700 4.Ache by CNC dividing head
Tool changer 40 - Trade
SK40 drive power 17 KW n = 8000U/min spindle cooling
Direct measuring system on all machine axes
Tool and Werkstückvermesssystem M & H
Table load up to 1000Kg
Machines turning:
Control: Mazatrol Matrix
Travel: X460, Z550, Y 110, C axis
Programmable Tailstock, parts catcher and bar puller, feed and chuck, Driven Tools radially and axially
Drive power 23 KW n = 4500U/min
Lathe conventional D = 460, Z = 1500
Other:
Heska Saw 260
Founded
2007
Employees
5 - 10
Certifications
Schwebheim
Germany - 97525
Founded
Employees
10 - 20
Certifications
Barßel
Germany - 26676
21 years of experience in the manufacture of precision turned parts, a continuously renewed machinery and a highly motivated team, makes from our medium sized company a reliable partner.
Fast, flexible and cost-effective to work for our customers is our business goal. Quality is our standard.
We provide services like:
CNC turning and milling and also conventional
Fully assembled modules
Machined Parts
Arc welding
Treatment of surfaces
More on request
Our company will be able to meet all requirements in terms of quality (Iso 9001 : 2008 )
Benefit from our years of experience and
special skills
Founded
1993
Employees
5 - 10
Certifications
Arad
Romania - 317340
Would you like to know which suppliers are ideally suited to your requirements?
Register now and submit your request.
We started in 1991 in a small workshop focused on metal processing and mechanical confectioning, after which, in 1999 we changed our name into today’s one – S.C. ADISAL TH S.R.L.
Our company was founded by ing. Alexandru Tamasan, graduate of the Technical University from Cluj-Napoca with over 30 years of experience in the field, and started its activity with only five employees, reaching today, after the development and expansion of its portfolio, to a number of 35 employees.
Due to our high standards of quality and our seriousness proven in our over 20 years of activity, 95% of Adisal TH’s production is set only for export.
We take pride in winning many Certificates and Prizes from The Chamber of Commerce and Industry of Romania, culminating with The First Place in industry nationwide in 2010, 2011 and 2012, under small enterprises category.
With more than 20 years of experience in this field, Adisal TH executes welding and cutting operations, having a highly qualified personnel, everything in order to satisfy the most demanding requests of our clients. Moreover, we execute operations of mechanical assembly and wiring.
We offer our clients complete solutions in the fields of metalwork and cutting operations.
We are speliazed in:
- Welded constructions / Structural Steelwork
- Machine frames / bases / racks
- Welded constructions (weldments)
- Automatic turning (bar)
- Turning
- Milling
- Drilling / threading / tapping
- Bending / folding
- Laser cutting 2D
Do not hesitate to contact us for more information or offers
Founded
1999
Employees
20 - 50
Certifications
Cluj Napoca
Romania - 400645
We invent, design and produce high-precission machinery for the world’s leading manufacturers of genuine leather products, operating in the luxury goods industry.
We work “hand in hand” with our customers to lead them to the completed solutions that they seek. Our goal is to help them to reduce labor costs and increase their profit.
Founded
2005
Employees
10 - 20
Certifications
Odorheiu Secuiesc
Romania - 535600
Manufacturer of structural metal products
Started in 2016
Based in Bistrita city, Romania
Founded
Employees
20 - 50
Certifications
Bistrita
Romania - 420108
Founded
Employees
20 - 50
Certifications
Rasnov
Romania - 505400
The company Furomaro was founded on 2006 as an individual business named "Kereszetes Arpad PFA", which transforms to a local
micro company at 2017 (family business). Our experience in machining metal goes back more than
33 years.
Founded
2017
Employees
< 5
Certifications
Arkos
Romania - 527166
Founded
Employees
5 - 10
Certifications
Oradea
Romania - 401236
We are a small company with big ambitions, always looking to exapnd our production line.
Our company was founded in 2016.
We started with 2 HAAS CNC Milling machines and soon after that we expanded our production and bought 3 more CNC milling machines and one turning lathe.
Last year we bought one new 4 axis CNC Milling machine.
We can procuce all kind of parts from al type of materials: aluminium, steel, brass, plastic, steinless steel.
Founded
2016
Employees
10 - 20
Certifications
Suceava
Romania - 727420
... Your partner in cutting CNC machining!
Founded
1998
Employees
10 - 20
Certifications
Lemgo
Germany - 32657
We are your competent partner in the area of machining. In modern CNC turning centers we produce parts made of steel, tool steel, stainless steel, brass, aluminum and POM. We supply well-known manufacturers in the automotive, aerospace, furniture, medicine, optics and modeling industry.
We manufacture high precision turned parts and grinding parts and document it as desired with initial sample and in the series with process control charts. We specialize in centerless grinding. When hardened parts we achieve surface finish accuracies of Rz 0.6.
We are certified according to DIN EN ISO 9001/2008
Their products comes complete with us from one source, including all surface treatments.
A self-development is our stop for collet chuck 173 E.
This stop is for collets 173E to adjust a length x. The stopper is made of VA. Enormous change Rüstkostenersparnis by rapid and adjust the stop. Very accurate machining length possible.
Founded
1998
Employees
5 - 10
Certifications
Greifenstein
Germany - 35753
The company Jakob Schäfer was in Kaiserslautern, Mühlstr in 1926. 9 of machinist - champion Jacob Schaefer founded.
Mr. Jacob Schaefer worked in the tool room Pfaff
, where he took his master's certificate in 1919. First founded Mr. Shepherd has entered the bicycle mechanic Guild, and worked as a guild master. It then bicycles and motorcycles were sold and repaired.
Before the second World War II was furnished a cylinder grinding and turning shop.
1944 destroyed a bomb attack the entire operation including residential house and a shop.
After the war, Mr. Schaefer from the ruins of an emergency shelter
built with a small workshop.
Companies - with the currency reform, the structure of today's "Shepherd" began. House and workshop were created again.
In parallel with the vehicle sales and the turning shop was built, so that in 1950 the first jacks, the Federal Railroad Central Office, could be sold in Speyer at the time.
The two operating branches vehicle and turned parts production had increased to 1955 so that the existing business premises were no longer sufficient. Therefore, in 1955 the purchase of a hitherto community-owned 10,000 square meters of grounds with a building of 300 square meters floor area and 200 sqm floor.
The turning shop was moved to Weilerbach and managed separately from the vehicle sale as KG.
As a complementary acted Mr. Jacob Schaefer, limited partners were Mr. and Mrs. Hedy Werner Hilbrath Hilbrath.
Since 01.01.2001 is also Jutta scouring manager and responsible for business administration and the personnel office.
As of 01.01.1982 the sole proprietorship was changed into a limited liability company. Managing partner was initially Dipl.-Ing. Werner Hilbrath.
Since 01.01.1995 Mr. Mechanical engineer Rüdiger scouring held this position.
Shareholders are Elke Palm, born Hilbrath and Mrs. Jutta Scheuer, bornHilbrath.
In 1990 the office building was enlarged by 100 square meters. After the construction of an additional hall in 1998 the operation are around 2,500 square meters of covered factory area available.
Currently, the annual turnover of 4.5 million euros at an average of 45 employees.
The GL is based on German quality and the production does not outsource to neighboring countries.
The rest of the year, the company under the slogan
"Quality ensures the future"
Founded
Employees
20 - 50
Certifications
Weilerbach
Germany - 67685
Milled & Turned Parts: What we do for you
Size alone is not crucial.
Exactly tailored to you and implemented in the best possible way, our parts meet their design purpose to the detail. With us you fall back to a range of services that meets the requirements for the development of individual parts and prototypes as well as to the production of a small series (up to 1000 pieces). We work individually, personally, customer-oriented and always with confidence.
With state-of-the-art CNC technology, we take care of you:
1. CNC milling (according to drawing or 3D (SOLIDWORKS available))
2. Production of complete assemblies
3. Realization of individual parts up to small series
4. Prototypes up to medium lot sizes
5. Creation of devices
In addition, we drill, saw and weld for you and work together with high-performance cooperation partners who, according to our information, harden, erode, burnish, anodize, wire cut, laser-cut and electro-galvanize for you.
Founded
2013
Employees
< 5
Certifications
Mühlau
Germany - 09241
Would you like to know which suppliers are ideally suited to your requirements?
Register now and submit your request.
The traditional company Schaffer + Moser AG is a longstanding and professional
Manufacturer of accurate mechanical precision parts. Schaffer + Moser AG has a
modern and technically advanced machinery for the machining of metals and
Plastics.
Founded
Employees
Certifications
Langnau bei Reiden
Switzerland - 6262
Schapenberg Industries GmbH is an owner-managed, dynamic and internationally positioned company, based in Sprockhövel in the southern Ruhr area of Germany. Schapenberg Industries also has local presences in India and Turkey.
As a holistic system supplier we see ourselves as an expert in castings (steel, ductile iron, gray iron, aluminum, investment and centrifugal casting), turned and milled parts, forgings, stamped parts and steel welding fabrications.
Detailed informations you can see on our official corporate website www.schapenberg.de
Founded
Employees
10 - 20
Certifications
Sprockhövel
Germany - 45549
We, Scharf Automation GmbH, are a service provider in the automation technology sector. Our range of services ranges from consulting, programming of controls and robots to virtual commissioning of machines.
Our company was founded in 1994 as a one-man company by Martin Scharf. Over the 20 years, the company has grown steadily and now has 6 employees. In addition, our field of activity has constantly expanded, so that today we can offer a comprehensive complete package in automation technology. Today we can look at a long list of references with customers from Austria, Germany and Switzerland.
Founded
Employees
Certifications
Vitis
Austria - 3902
Founded
Employees
Certifications
Aldingen
Germany - 78554
More than just rubber: Your source for the technical implementation of sophisticated ideas of elastomers and thermoplastics.
As an international company, we are specialized in these segments and are the right address for demanding tasks. And there is especially interesting where others stand on the hose: for difficult requirements, special quantities, special series, special materials, customized solutions. Together with our customers we develop product ideas and realize them from the initial sample to mass production. Our consulting services range from the choice of materials to the construction and application techniques. An integrated performance for the period of high claims.
Molded rubber, molded rubber parts, plastic injection molding, injection molding, rubber profiles, profiles of rubber, plastic profiles, plastic profiles, rubber to metal bonding, rubber-metal buffers, molded hoses, elbow hoses, rubber hoses, rubber hoses, plastic hoses, plastic hoses, stamping parts, turning parts, milling parts, power transmission, timing belts, V-belts
With our own manufacturing capabilities and alliances with manufacturing partner companies, it is possible very flexibly to our customer requirements.
Step into the world of rubber and plastic technology!
Founded
Employees
Certifications
Bietigheim-Bissingen
Germany - 74321
Find the ideal supplier in just 1 minute
Communicate directly with buyers
Unique market price comparison to realize the best prices
Existing processes, systems and suppliers can be easily integrated.
Buyers use the platform completely free of charge
