With Connfix GmbH as a system supplier, your processes are optimized and cost savings achieved.

Together with our network partners, we produce customer-specific drawing and special parts
in the field of turning technology, casting technology, stamping and bending technology as well as assembled rubber and corrugated metal hoses, which are produced in our factory.

We accept the most varied of requirements and support you from the development of the prototype to series production.

Our customers already include well-known OEM manufacturers (automotive, plant, machine and shipbuilding)

References can be sent on request.

Contour Covering Technology BV is a supplier of sheet metal components and assemblies. We distinguish ourselves by our clean and accurate production processes. We use our broad portfolio of competencies to supply sheet metal components to a diversified mix of market sectors.
We’re an extension of our customers' capabilities; we’re involved from the idea phase up until actual production. This way we achieve the optimal outcome, during the entire product life cycle. We can produce both collaboratively designed products, as well as products based on customer design and specifications.
What makes us your choice: - we have all processes (most automated) under one roof. This makes us flexible and allows us to work with short lead times.
In addition to our state of the art machine park, we can implement logistics contracts, on which we can adjust our production.

Laser cutting
CoolCut offers professional laser cutting and engraving services. In addition, we provide full consulting in the field of laser processing of carbon steel, stainless steel and aluminum. Our offer is addressed to both individual clients and entrepreneurs. Many years of experience and passion with which we do our work allow us to satisfy even the most demanding customers.

Below we present the range of materials and thicknesses in which we cut:

Steel S235 / S355 - 0.5mm - 12mm
304/316 stainless steel - 0.5mm - 12mm
Aluminum PA11 - 0.5mm - 8mm
In addition, we cooperate with friendly companies that perform waterjet cutting for materials that are not in our range.

Bending
We also offer sheet metal bending services with a press brake. Bending is the process of forming sheet metal. With the help of a punch and a sheet prism, we can bend at any angle. We also have a very large number of special tools, thanks to which our offer is very wide. Press brakes, popularly known as bending machines, are numerically controlled devices (CNC), which significantly increase the efficiency of the operator's work, while ensuring accuracy and repeatability.

Welding
Welding is a very important production field, therefore we want to provide you with this service at the highest level. Qualified welders performing their work in a professional workshop will make every effort to ensure that the final product meets all the expectations of our customers. We offer MIG and TIG welding.

Powder coating
We invite you to take advantage of our powder coating services. Our offer includes the full RAL palette. Quality and timeliness are our priority. We pay a lot of attention to the powder coating service, as it is the last stage of our journey through the production process and it is after this stage that our clients see the results of our work for the first time and the best assessment they can give us is to return to our thresholds.

Our orders come mainly from companies in the mechanical engineering, medical technology, electrical and automotive industries. But we also fulfill individual wishes for private prospects

Cresseri, light metal carpentry for every market

Cresseri Srl, established in 1977, is situated in Erba between Como’s province; over the years it specializes in third party processing of sheet metal and metal working.

The factory has a surface of 15.000 mq and the production area covers 3.000 mq. Cresseri produces different types of metal products, to meet specific needs of clients, supporting them with design and technical assistance.

During the years, Cresseri has become a leading reference in the metal processing field for international businesses and small and medium size enterprises, ensuring a reliable and punctual service including:

Laser cutting
Combined laser cutting
Metal bending
Tack welding
Welding, assembly and finishing
Inserts application and riveting
High flexibility performances

We offer an accurate customer tailored service, for every kind of material. We can process various metals, such as:

stainless steel
carbon steel
special steel
aluminium and its alloys
copper
brass

Prompt assistance:

Cresseri is not only a high precision light metal carpentry but also design and technical assistance. A team oriented to develope your project.

Specialist in welding carbon and stainless steel and aluminium.
Producer of offshore containers, trailers chassis sandblasting boxes and others. All required certification and testing included.

We look back on over 100 years of company history. Since 1911, we have grown together with you — to meet the individual requirements and needs of our customers. As early as 1950, DALEX completely converted its manufacturing program to resistance welding technology. In the 1970s, our offering was expanded into a full service: In addition to a wide range of products, technical know-how was offered for all welding tasks. DALEX impresses with consulting services, in-house development and machine design. An in-house T-Center enables testing, experimental welding, the demonstration of welding processes and welding patterns. It enables us to create improvised welding tools for the welding task and based on the component geometry and to analyse weld connections metallographically with micrographs. Service and training services complete the offer.
Our goal — to inspire you in the long term through an active, solid, reliable and partnership-based business relationship — is still our corporate philosophy for the future. DALEX has trade & sales agencies worldwide. We are there for you in close proximity to our customers and provide advice in your local language. At the Wissen site alone, 140 highly qualified, mostly long-standing employees shape DALEX through their dedication, expertise and experience. In cooperation with proven, efficient suppliers and service providers, we offer product quality “Made in Germany”.

Damke Metal Processing GmbH & Co. KG is a metal processing, medium-sized family business with over 20 employees in Peter Hagen-Eldagsen. We are a supplier for laser - active and weldments -, folding. For over 40 years we have been supplying the industry for over 80 years and we are at the site Eldagsen. We are certified according to DIN EN ISO 9001: 2008

DAMA manufacture of sheet metal blanks for more than 35 years by autogenous
Flame cutting and plasma cutting from 15 to 150 [300] mm.

The high-quality standard is determined by the use of sheet metal and slab
ensured from Germany and other Western European countries.

Mill scale and cut edges with larger components by plastering
Rays away. Small parts are tumbled.

Custom flatness tolerances through the use of the 500 t
Straightening press guaranteed.


Danne For over 20 years, sheet metal blanks [steel, stainless steel & aluminum] be the
2D laser cutting produced. For production are 8 laser system in
Large format 1.5 x 3.0 m and 2.0 x 6.0 m format available.

In addition to the laser systems is also a CNC punch for the Sheet Metal -., And
Processing.

Depending on customer requirements components may also be blasted.

Further processing is done with CNC controlled Abkanntpressen up to a
Length of 6.8 m.


ASK manufacture of welded structures [MIG, MAG, TIG, welding of
Hand or robot] according to customer drawings, including a mechanical
Machining [5 axes].

In addition to the various welding methods are also different welding
processes such as robotic welding available.

The production ranges from number 1 to more than 1,000 St.. Also, the unit weight
for components in the field of mechanical engineering exceeds 4 t.



For details, see company presentation and / or power spectrum

Our team consists of
experienced staff
Our company has implemented a TÜV-certified quality system for welding works in accordance with the requirements of the SIST EN ISO 3834-2 standard. The supervision of the implementation of the quality system of welding work and welding is carried out by the IWE welding engineer – welding coordinator and the production manager, who has also completed the specialization for the IWE welding engineer.

In the company, we ensure that we procure high-quality input materials with appropriate certificates for production, perform control of input materials upon delivery, and ensure proper handling and traceability of input materials. The same applies to additional materials..

In accordance with the quality system, we carry out regular periodic inspections of welding and other equipment and calibration of measuring instruments at authorized organizations within the prescribed time limits.
Visual, measurement and non-destructive tests are carried out in-house or in an authorized laboratory for non-destructive tests at SIJ Ravne Systems.

After a successful final inspection, our products are properly packed to prevent damage during transport.

Complex sheet metal processing
Serial and custom metal production. We process steel, stainless steel and aluminum. We have been on the metal production market for more than 20 years!

We produce / work on following working steps for our costumers:
stamping, chipping, nipping, cutting, welding, spot-welding, stud welding, swaging. If contract production or completely executed modules, we supply and manufacture Germany- and Europe-wide.

We manufacture following materials:
Stainless steel: 1.4301, 1.4016, 1.4571
Aluminium: Al99,5%; AlMg3; AlMg5; AlMgSi 0,5; AlMgSi 1,0
Steel: DC01; sheets S235, S355
Galvanized plates: DX51D
Copper

We are supported by our up to date machine park with cnc punching machines, sheet metal benders and presses as well as our plate shears, hole punches and steel profile shears made by well known companies like Schechtl, Boschert, Muhr and Bender.

In addition we dispose of own certified products in the photovoltaic segment, especially aerodynamic mounting systems for flatt roofs, that represent our main competence in this area. Furthermore we manufacture special mouldings, cble channels and mounting parts of different kind.

We manufacture from small-scale series to big orders, project-related or to stock. High quality planning and industrial engineering is guaranteed by our engineers, our highly motivated production personnel is at your daily disposal.

We are a family business since 1997, which supports you in outsourcing your manufacturing. Pre-assembly, final assembly, inspection, post-processing, packaging, labelling.

Since 1997 we are helping our customers to save resources and increase their flexibility in production. We are a family-owned company specializing in effective outsourcing measures in manufacturing. We offer our industrial services in the Stuttgart area for the electrical, automotive and mechanical engineering industries.

We help you to work reliably and straightforwardly, flexibly and dynamically by supporting you in outsourcing your production. In addition to pre-sorting, we also take care of the assembly and installation of your products. From screwing, gluing and welding to functional testing and proper packaging, we take on a wide range of activities:

- Testing and inspection work
- Assembly and finishing work
- sorting work
- Packing and labelling

Our team consists of around 35 motivated employees, who have a lot of experience in the practical execution of assembly, testing and selection work. We are happy to place our personnel capacities at your disposal in our company.

Our values:

- Reliability, excellent quality and very high delivery reliability are a matter of course
- Flexible and dynamic, changes and adjustments are carried out according to your wishes
- Fast, decisions can be made quickly due to a very flat hierarchical structure
-Customer-oriented, your satisfaction has the highest priority uncomplicated, you determine the basic conditions

As we have a lean structure, we can offer our services at attractive conditions.

Benefit now from our years of experience and contact us with a non-binding inquiry. We would also be pleased to introduce ourselves personally to you.