“From your drawing to to the end product! “With this route, we meet all customer requirements in a modern way.

Some areas of construction, procurement of raw materials and a very high level of vertical integration are our plus. Over decades, we have acquired many years of experience in refining the components in a wide variety of surface qualities and assembling individual components. Thanks to a large network of suppliers and service providers, we have very good economic prices and strive for very fast delivery times. This is the basis for long-term cooperation with well-known companies from a wide range of areas of mechanical and plant engineering. As a modern company, we are happy to use additional requirements in the area of processing orders for our own development.

Our customers are offered everything they need within our group of companies, all in one basket: from development and project management via the production of tools for plastic and metal fabrication, through to manufacturing the parts.

In this way we closely co-operate with our customers in developing functional structural plastic and metal components on the basis of the design, thereby achieving an optimum combination between plan, design, manufacture, and cost structure.

The integrated possibilities have enabled us substantially to shorten the project run up to the point of series production. The systems Pro-engineer and Catia, available to our staff, permit the creation of structural components and tools, "in one casting" as it were.


Injection Moulds Our staff in the individual manufacturing areas have state-of-the-art technologies and most up-to-date machines (such as 12-wire and 15-wire cavity sinking EDM machines) at their disposal. In producing moulds with a guaranteed number of shots, especially for the automobile industry and consumer electronics, our dictum is precision and quality.

This holds true for injection moulds, diecasting, duroplastic, two-component, rotating, transfer and insert/outsert moulds, just as much as it does for two-colour moulds, combinations of hard and soft plastics, automatic wire leads, in-mould decoration, and precision gear wheels.

Rapid tooling with the aid of our EOS metal sintering machine M250 Extended makes it possible to produce mould inserts for injection moulds and prototype tools within a very short time.


Eighty moulding machines in Vienna and Hungary, with a clamping force of between 25 and 1,100 tons, offer all the possibilities of manufacturing moulded, thermosetting and duroplast, gas-injection moulded, two-component moulded, insert and outsert moulded, as well as in-mould decoration parts.

Our machines are equipped with automatic robot systems, and automatic packaging lines complement the production line.

Vienna: 3-shift operation / technical products and precision parts with a mould clamping force of up to 500 tons,

Hungary: 4-shift operation / technical products and design parts with a mould clamping force of up to 1,100 tons.


Your plastic parts are coated in three fully automated painting lines on a water-soluble basis (single-component or two-component coating).

Your metal parts are electrostatically painted, from the smallest parts up to housing coatings for consumer electronics.

We are a fairly new company founded for fast prototyping in sheetmetal and welding constructions. The team includes experts from laser cutting, bending, welding MIG, TIG and other specialities. Our goal is to become the slovenian Tech center, always investing in new high grade equipment and machinery and helping Start-up companies to get their first prototypes cheap or sometimes even for free.
We have EN1090-2 and EN1090-3 Quality standards implemented.

Welcome to K + F Metalltechnik GmbH & Co. KG

— K+F products are tested in accordance with EC guidelines, national and international standards
— For over 30 years, we have been manufacturing quality products in our production facilities, which are designed according to the latest production guidelines
— Every employee sees himself as part of the system and is constantly working on its optimization
— Pioneering innovations and investments mean progress
— This is the only way we can achieve a high standard of quality that ensures the full satisfaction of our customers

At Klas Metal we have been working in the field of metal production for more than 30 years. The wealth of experience we have accumulated so far provides us with necessary skills and an abundance of knowledge, which ensures professionalism of our work.

We are a family business that has been - since our founding in 1983 - devoted to the manufacture of metal products made of welded sheet metal, aluminum and stainless steel. Over the years we have expanded our offer and added other services, such as stamping inserts, powder coating, welding, laser welding and laser printing. Today we provide a comprehensive service in the field of metal processing and production.

Stamping and forming technology
Toolmaking
Assembly production

You would like to make metallic components additive? Are you interested in the possibilities of this technology?

With the additive manufacturing of 3D-printing metal (SLM, Laser-cusing®, DMLS etc.) we offer you a production technology that is no longer used only in prototype production. This process offers completely new possibilities where conventional processes such as laser cutting, turning or milling reach their limits.

This is a process that is used exclusively for the production of metal. As with 3D printing, the components are built up by layer-by-layer build-up and fusion of metal powder; the component has almost identical mechanical properties to the original material.
You need support in implementing your automation project?

Then you are exactly right with us! We realize complete manufacturing cells according to your idea. From the feasibility study on the construction and assembly to commissioning and on-site support, we are the right partner for your project.

In particular, we cover the following areas of responsibility:

- Project Management
- Programming
- 3D printing metal (additive manufacturing)
- Security management
- 3D scanning
- Milling technology
- Construction
- Assembly
- Hose packages
- Service
- Training

Our 3D metal printing services at a glance:

- construction work (cooling ducts, component optimization, etc.)
- Checking the cooling channel design (flow simulation, thermal images, flow analyzes)
- coatings
- Plastic prototypes
- Component measurement
- Creation of plastic models
- 3D scanning / reverse engineering
- fine machining (milling, grinding, eroding etc.)
- Surface treatment (anodizing, electropolishing, etc.)
- hardening
- welding

INNOVATIVE SYSTEM SOLUTIONS IN SHEET METAL
With our many years of consulting, development and production expertise, we transform the ideas, requirements and needs of customers into timely, high-quality and innovative system solutions.

Our claim: “Products made in Germany”

The entire value chain, from design to construction to manufacturing and logistics, takes place exclusively at our plant in Kirchberg an der Iller - in the high-tech engineering region in the heart of Baden-Württemberg.

Our customers include well-known and innovative companies from the fields of mechanical engineering, construction machinery, rail industry, and renewable energy.

www.komot.eu

About us

Kreutz & Mock is a medium-sized company and the leading manufacturers of wire bending parts of all types. With over 3000 different articles we can offer our customers a wide and diverse range of different wire products. The necessary machines for the production are developed and built in-house by our own engineering department which gives us the possibility to always be flexible according to our customer's needs.

You can find further details about us and our philosophy on our website.

Products

We manufacture wire bending parts in all sorts of variations and models. We supply many industries with our products like the automotive industry, construction industry, agriculture, blinds manufacturers and many more. We also have numerous technical bent parts in our repertoire.

We are happy to try to achieve your specific needs and requirements, because quality, punctuality and being in step with actual practice are our basic principles to deliver high quality as well as best functionality products. It does not matter whether they are single quantities, small quantities or a large series. We are flexible and deliver quality at fair conditions.

We offer

+ Qualitycertficate DIN ISO 9001:2008
+ in-house specified tool construction
+ in-house machinery construction
+ quick production of samples
+ technical and experienced know how
+ skilled telephone service
+ large production spectrum

Materials

Every material processed in our factory has a dedicated inspection certificate that will be provided with your delivery on request.

We manufacture bent wire components for you in all variants and materials.

Here a selection of the materials used:
+ Stainless steel wire 1.4301, 1.4310, 1.4362, 1.4401, 1.4404, 1.4571 in different tensile strengths
+ Spring steel wire 0.9 mm to 6.0 mm. Qualities A, B, C, D
+ Steel wire C9D bare or copper-plated. C9D soft galvanised in 1.0 mm to 8.0 mm
+ Crapal wire
+ Becrosi valve spring wire
+ Silver and Palladium wire

We are a renowned Slovenian engineering company in the field of mechanical engineering. We deal with manufacturing and assembling machine components services and we also provide mechanical design services, all in the field of structural steel, stainless steel, aluminium and plastics. We are present in various sectors of the industry across Europe.

As a family owned company we have been a professional partner for already 20 years between Slovenian manufacturing companies and European customers (Austria, Germany, Switzerland and Denmark), for whom we manufacture custom-made products in Slovenia. With our qualified experts we ensure correct technical production, planning, quality and timely order execution.

Our advantage is that you as our customer have only one business partner who covers the entire Slovenian market for products ranging from 0.1 kg up to 50 tons. We also guarantee a timely delivery of your orders and the quality which are essential for long-term partnerships.

As a modern company our goal is to meet the needs and wishes of our customers to the best of our abilities.


TECHNICAL POSSIBILITIES

Material:
Metal, INOX, aluminium, brass, casting, plastic, etc.

Cutting:
Mechanical cutting, flame cutting, plasma cutting, laser cutting

Welding:
Steel, INOX, aluminium
Maximum weight: 50 t

Turning:
CNC machines up to: Ø = 1000, L = 6000 mm
CNC carousels up to: Ø = 6800 mm

Milling
CNC horizontal milling machines up to: x = 10000 mm, y = 4000 mm
CNC vertical milling machines up to: x = 2000 mm, y = 1000 mm
CNC portal milling machines up to: x = 15000 mm, y = 5500 mm, z = 4000 mm

Eroding (EDM)
Wire and spark erosion

Grinding
Plane grinding machines up to: x = 3000 mm‚ y = 1500 mm
Round grinding machines (inside or outside) up to: Ø = 400 mm, L = 4000 mm

Surface treatment
Sandblasting, painting, galvanising, nickel plating, anodising, black oxidising, nitriding, hardening, etc.

Quality control
Quality measuring with special tools and 3D measuring machines

Assembly of machined components
From component machining to component assembly with 3D measurement protocols.

Transport
We can arrange the transport of ordered items from Slovenia to your company.

We are pros in custom metal fabrication, CNC laser cutting and metal forming. Metals are simply our passion. Looking for a new supplier? With us you will always find a professional, human and individual approach. We are happy to look at all your projects with you and offer you a tailor-made solution.
We are confident that we will exceed your expectations with top quality finished products and reliability with agreed delivery dates. Customer satisfaction is our main goal, regardless of the size of the job.

LASERLAM is a leading company in the production and sale of services related to the applications of laser cutting, bending, welding and mechanical processing in general.

Laser Schnitt Center GmbH has been an experienced partner in sheet metal processing and metal technology in several industries for over 30 years.

Would you like to know more about us?
Then simply ask, we will be happy to help you.

MFG
The team from the Laser Cut Center

Lav.in
Lav.in is one of the most structured metal structures in its field (currently it has more than 140 employees and insists on a covered area of over 13,000 square meters, with the possibility of making a warehouse);
It is well equipped. Inside, in addition to 4 laser cuts, 1 punching machine, 16 bending machines, 3 calenders, separate welding departments between stainless steel and ferrous materials with 12 workstations, department with assembly line, satin finishing department
and polishing, there are also 1 combined laser cutting-punching machine,
2 fiber laser cutting (cheaper up to 50% compared to traditional cuts
laser), 1 automatic panel bender, 1 semi-automatic and 1
automatic 4-roll cnc calender. We supply the product including surface treatments. In addition, we have 2 trucks and 2 vans to make deliveries and optimize them
times. Our production is mainly oriented to the realization of pre-assembled and assembled for the sectors: naval, furnishing, professional, medical and stoves. Furthermore, we make kitchen hoods and professional ovens;
Lav.in is very flexible and reactive both in estimating and in production, guaranteeing very quick deliveries: it is very competitive in terms of prices, thanks also to a photovoltaic system of over 600 kW of power with which Lav.inè is self-sufficient from the point of energy view;
Lav.in is certified ISO 9001: 2015;
It is OHSAS 18000 certified.

Limrol is a company that has been operating since 1996. We deal with roofing, sheet metal accessories, sheet metal bending up to 7 meters, waterproofing, locksmithing and metal processing with lathes, cnc punching and metal cutting up to 20 millimeters.

Lindner metal is a medium-sized company from the Erzgebirge. Our main focus is the production and distribution of stairs and railings.
For swimming pool equipment, industrial applications and welded constructions but also for pipe bending, bends and small batch production, we are the right partner for you.

From construction to modern CAD workstations to production in different areas of production, to delivery and professional installation guarantee you our 30 employees a high quality in the execution of your orders. Due to the close relationship with our customers we ensure the continuous development of our products.

We are a member of Warenzeichenverband 'STAINLESS STEEL Stainless' and possess the certification according to DIN EN 1090 EXC2 for the materials S235 to S355 and stainless steels.