We are in the field of machining;

turning, swiss turning, multi-axis turning
milling, 5-axis milling,
internal grinding, external grinding, surface grinding, profile grinding
Gear hobbing, gear profile grinding, screw manufacturing, all types of conical straight helical gears,
Laser cutting bend welding up to 30mm for sheet metal.
All surface cleaning and coating processes,
heat treatment works

We can.

Except that,

pipe bending,
Available in our profile extrusion capabilities.

You can try to choose us for quality production.
The superiority of the service provided is always our first indispensable principle.

In 1990 Karl Kampka founded his company Karl Kampka – Chemischer Betrieb in a small garage on the premises of his employer at that time. At first consisting of himself, his family and a colleague, over the past few years the enterprise has grown into a company employing more than 60 persons now.
Because of the company’s successful work, the production area was expanded from 700 sq.m. to 1000 sq.m. in 2001, separating the black finishing from the phosphating department which had been located in one production building until then.
In order to maintain the quality standard achieved and to improve on it, the operation subjected itself successfully to the DIN EN ISO 9001:2000 quality management system certification performed by the TÜV Rheinland.
In 2006 the company’s growth made the use of a neighboring building, now belonging to the company, necessary. The existing halls were entirely dedicated to added value production areas and were, together with the facilities, re-built again to suit changed requirements.

Keurhorst Metalworking was founded in 2015 by Michiel Keurhorst, an experienced metalworker, who has mastered the profession from practice after years of experience in the world of machining.

As a company, we mainly focus on complex 3D milling, but whether it is workpieces of Steel, stainless steel, aluminum, titanium or plastic, we always aim for the best results and are satisfied with nothing less.

Furthermore, we are pre-eminently the address when it comes to high-end fine mechanical parts for, among other things, injection molds.

In order to achieve this, we have access to a beautiful Hermle milling machine, and a Bridgeport. Furthermore, we naturally work with the best (measuring) tools, in a fully air-conditioned workshop.

In addition, we can sometimes offer something extra with our Radial drilling machine, and a 3D printer.

We are a young and dynamic company that does not shy away from challenges and where perfection is of paramount importance. Need something that requires high accuracy? Look no further .. and work with Keurhorst Metalworking.

We are a small company established in 2015 from Romania. Our company is a family business, me and my father are currently working and we successfully cover all the departments and deliver good quality parts. We have great experience in working export, we worked for foreign companies from the beginning (Italy and France companies). For the last 2 years we worked for Xometry GMBH, and we had completed over 260 orders. We are searching for new opportunities and new clients to establish a long term partnership (with repetitive orders). We are client orientated people and we have the capacity to adapt to our clients needs.

BKG Intern

The company Klaus Bongartz GmbH & Co. KG manufactures since the company's founding in 1970, high-quality turned and milled parts for the different sectors of the industry.

Industries we serve:
* Valves
* Defense Technology
* Hydraulic
* Packing
* Aviation
* Machine Tools
* Special machine
* Textile Engineering

Metal as a whole

Specialization with years of know-how also in niches is the recipe for success of our business policy: Our company focuses in the field of metal processing drilling, turning and milling parts from steel and non-ferrous Metallen.Die company Bongartz has invested heavily - in common to the industry to use rotary- , milling and drilling machines, but also in wire and sinking EDM machines, honing and grinding machines. And at work "On the Mutzer" also chemical surface treatments such as manganese phosphating according to DIN EN 12476 and DIN burnishing be executed 50938 in best quality.

The result was a high degree of vertical, which allows us to offer customer-friendly solutions of short distances, because the parts can dispense with long maturities to other converters.

Our service goes even further: we offer you the mount of assembly, and in addition we can their product provided with a marking. Laser marking and roll embossing are the usual methods, but also engravings are possible with us.

Our delivery and collection service makes us more independent of freight forwarding and parcel services.

Qualification

It is no longer enough to deliver quality today, so it should also be documented. For this reason, a quality management system was introduced in 1985 after the NATO standard AQL 130 and 131 and monitored by our customers and certified. Through the ISO 9001 certification in 1997, you can be sure that their product is in the best hands. Another customer led in 2000, the accreditation for aviation.

Our expert staff will weitergeschult at regular intervals and qualifies for the tasks that you provide us. We are a recognized training company training his young themselves.

Whether small or large series, to request a documentation of their product. 3D coordinate measuring Vielstellenmeßgeräte (SPC), layer thickness and surface roughness measuring instruments and many others who are all subject test equipment, the requirement to serve the customer complying with drawings components and assemblies to deliver.

Convenient location

Our company is conveniently located between suppliers and customers in a prime location in space. The proximity to the Netherlands, where we supply customers, as well as the proximity to the Ruhr area are of great advantage. So you can achieve a good, fast communication, not even raises major problems. With the location in the district of Viersen company founder Klaus Bongartz is just as happy as his daughter Jacqueline, who took over from him in early 2005, the management and it brings two decades of experience in his own company.

Loyal customers for over 35 years

The strength of our company is the absolute precision of the work. This pays off in the great trust of which put the often long-standing customers in the quality of the workpieces supplied, in individual parts as well as in large series. There are satisfied customers who keep our operation since 35 years loyalty.

Dear ladies and gentlemen

Thank you for your request and the associated interest in working with us.

We specialize in customer projects and are very strong in implementing customer requirements.
We procure directly from the steel mills. As a complete project provider with SWISS now how sponsors, we face every challenge.

As a system partner of Bühler Group, Stadler Rail, Burckhardt Compression and other major corporations, we would be happy to introduce ourselves to you. We are very active in the project business. We plan, procure, produce and deliver your assemblies, mechanical components, machines and peripheral devices, all from a single source, directly to your factory floor.

Our team of project engineers is always ready to implement these tasks according to customer requirements. We produce prototypes. Individual as well as small, medium and large series. As a machine manufacturer with a wide range of products and a large machine park, we offer various assembly options as a complete supplier. We deliver internationally to your workshop or directly to your site.


Kind regards/Yours sincerely
Sergio Lo Curto

CEO
KM-TECH GmbH

KM-TECH GmbH
Sulzerallee 48 I CH-8404 Winterthur, Switzerland
Phone +41 52 720 20 30
Mobile +41 78 709 28 08
Email sergio.locurto@km-tech.ch I web: www.km-tech.ch

Stay up to date and follow us on:
www.linkedin.com/company/km-tech/

Since 1970, KMW Parth GmbH has stood for quality and competence in the processing and production of plastic and metal goods.
We start every day knowing how to combine the best of our long-standing tradition with the innovative opportunities of the future.
Professional employees, efficient, highly robust machinery and cutting-edge control technologies allow us to offer a wide variety of products with extensive vertical range of manufacture. With us, delivery reliability and quality assurance do not happen by accident – they are what drives us.

Please, feel free to contact us for any further questions.

NOT ONLY SUPERFICIAL BETTER!
This is our claim selbt to us. As a specialist for the surface treatment, we offer our customers the method burnishing, zinc phosphating and manganese phosphating to - quickly, reliably and in a prime Qulaität!

Quality, adherence to deadlines, zero error tolerance, precision... These are not just buzzwords for us. That is our company philosophy. For us, the best proof of quality is that our customer comes back and not the delivered goods. We understand quality not only to mean product quality, but also all of the business processes and services that lead to it. From procurement to production to delivery. What our customers appreciate about us is our ability to deliver qualified workmanship and precision at the right price and on time, and to be able to help at short notice even in emergency situations.

KRAVLA, sro is a dynamic company with foreign participation, which deals with the production of metal parts. We specialize in small and medium series. Our work includes locksmith and welding work, production of various machine parts and metal constructions and mechanical machining (turning and milling). Dimensional accuracy is achieved by CNC machine.

We strive to fulfill all customer requirements and offer the best customer service. We achieve high quality through know-how and employee involvement.

We create mutually beneficial relationships, not only with our individual access to individual strategic foreign partners, but also to our small domestic customers.