We manufacture for you in the areas of sawing, turning, milling, drilling, grinding, gear cutting and grooving. In all areas we have experienced employees who have been loyal to us since the company was founded. In order to preserve and pass on this experience, we regularly train successfully.

Big and small, we can do both. Regardless of whether it is a small turned part or a large welded construction, we will manufacture it for you. Thanks to our wide range of machines, we have a high level of vertical integration, which enables us to offer our customers a wide range of components.

Our customers are offered everything they need within our group of companies, all in one basket: from development and project management via the production of tools for plastic and metal fabrication, through to manufacturing the parts.

In this way we closely co-operate with our customers in developing functional structural plastic and metal components on the basis of the design, thereby achieving an optimum combination between plan, design, manufacture, and cost structure.

The integrated possibilities have enabled us substantially to shorten the project run up to the point of series production. The systems Pro-engineer and Catia, available to our staff, permit the creation of structural components and tools, "in one casting" as it were.


Injection Moulds Our staff in the individual manufacturing areas have state-of-the-art technologies and most up-to-date machines (such as 12-wire and 15-wire cavity sinking EDM machines) at their disposal. In producing moulds with a guaranteed number of shots, especially for the automobile industry and consumer electronics, our dictum is precision and quality.

This holds true for injection moulds, diecasting, duroplastic, two-component, rotating, transfer and insert/outsert moulds, just as much as it does for two-colour moulds, combinations of hard and soft plastics, automatic wire leads, in-mould decoration, and precision gear wheels.

Rapid tooling with the aid of our EOS metal sintering machine M250 Extended makes it possible to produce mould inserts for injection moulds and prototype tools within a very short time.


Eighty moulding machines in Vienna and Hungary, with a clamping force of between 25 and 1,100 tons, offer all the possibilities of manufacturing moulded, thermosetting and duroplast, gas-injection moulded, two-component moulded, insert and outsert moulded, as well as in-mould decoration parts.

Our machines are equipped with automatic robot systems, and automatic packaging lines complement the production line.

Vienna: 3-shift operation / technical products and precision parts with a mould clamping force of up to 500 tons,

Hungary: 4-shift operation / technical products and design parts with a mould clamping force of up to 1,100 tons.


Your plastic parts are coated in three fully automated painting lines on a water-soluble basis (single-component or two-component coating).

Your metal parts are electrostatically painted, from the smallest parts up to housing coatings for consumer electronics.

You would like to make metallic components additive? Are you interested in the possibilities of this technology?

With the additive manufacturing of 3D-printing metal (SLM, Laser-cusing®, DMLS etc.) we offer you a production technology that is no longer used only in prototype production. This process offers completely new possibilities where conventional processes such as laser cutting, turning or milling reach their limits.

This is a process that is used exclusively for the production of metal. As with 3D printing, the components are built up by layer-by-layer build-up and fusion of metal powder; the component has almost identical mechanical properties to the original material.
You need support in implementing your automation project?

Then you are exactly right with us! We realize complete manufacturing cells according to your idea. From the feasibility study on the construction and assembly to commissioning and on-site support, we are the right partner for your project.

In particular, we cover the following areas of responsibility:

- Project Management
- Programming
- 3D printing metal (additive manufacturing)
- Security management
- 3D scanning
- Milling technology
- Construction
- Assembly
- Hose packages
- Service
- Training

Our 3D metal printing services at a glance:

- construction work (cooling ducts, component optimization, etc.)
- Checking the cooling channel design (flow simulation, thermal images, flow analyzes)
- coatings
- Plastic prototypes
- Component measurement
- Creation of plastic models
- 3D scanning / reverse engineering
- fine machining (milling, grinding, eroding etc.)
- Surface treatment (anodizing, electropolishing, etc.)
- hardening
- welding

Our company has been operating in the supply and manufacture of factory materials since 1991. Adopting its customers as strategic partners, our company aims to manage all the expectations of its customers, from product and service supply to after-sales service. Our company continues to provide customer-oriented service by providing the highest level of service, the highest quality product supply at the most affordable price in the shortest time possible. The systems and machines in our company;
-SAP SYSTEM
-Cnc Lathe
-CNC Milturning
-CNC swiss turning
-CNC Milling
-3D MEASUREMENT devices
General and Special Production
At the same time, automotive sector products, construction projects, productions containing technical drawings, machine parts and all kinds of industrial products are manufactured by our company.

our certificates

İSO 9001-2015
AS9100 :will be updated
OHSAH 18001

We are a company that has been the right partner for 14 years now when it comes to prototypes, tools and devices for the mobile sector.
General contract manufacturing in the areas of HSC machining, mold making and model making complete our offering.

C. Melchers & Co. was established on January 1, 1806 in Bremen, where the global company still maintains its headquarters to this very day.

In the first few decades of the company’s history, over 30 ships sailed the oceans of the world under the Melchers flag, linking the ports of Europe, America and the Pacific.

In the 1860s, C. Melchers & Co set up operations in Asia, where all its trading interests swiftly moved. At the same time, with the onset of steam ships, it abandoned its own shipping business to devote itself entirely to extending its trading operations.

1866 saw the establishment of the first branch in Hong Kong, in the wake of which China began to develop into a key lynchpin for the company’s business. The ensuing decades were a period of rapid growth for Melchers in China, with over 2,000 people employed at 12 branches and plants throughout the country.

The First World War proved to be a setback for business relations, although business quickly recovered. It was not until the end of the Second World War in 1945 that business came to an almost complete halt. Even so, the company continued to survive, re-opening its first branches in Hong Kong, Singapore and Kuala Lumpur in the early fifties and gradually extending its branch network across Asia.

Following the opening of the Chinese markets at the end of the seventies, Melchers set up branches here again, underscoring the significance of Chinese business for the company.

With the establishment of a branch in San Francisco in the early eighties, the company also started to engage in US-Asian trade so as to gain a share of the rapidly growing trading relations between these two regions.

Trade with China remains a key focus of the company’s overall business, comprising as it does imports of special natural products and finished goods on the one hand and exports of plant, machinery and supplies for the Asian industry on the other. Yet, business with South East Asia has since also come to the fore, with the company amassing broad-based expertise in marketing and selling consumer goods in particular.

There are special departments for each article group in Bremen as well as at the foreign branches. They work largely independently within the overall company and are staffed by highly qualified experts. Over 1,000 employees in Germany and abroad assist customers and suppliers with their specialist knowledge. Rather than being based at the company’s headquarters, most of these employees are now stationed at subsidiaries, something which in turn reflects the company’s further development and the strategic alliances which it has forged.

We, Metallbau Schmalenbach, specialize in manufacturing a wide variety of high-quality and tasteful stainless steel and corten steel accessories. Years of experience in working with metal products, experienced know-how and the gift for exceptional design give our products uniqueness. The focus is on narrowing down to the essentials. In a charmingly flooded world, peace and relaxation are important to us. Simplicity is the goal and with it the uniqueness of our products.

In addition to our wide range of products, we also offer you the opportunity to have your ideas implemented. We offer you custom-made custom-made products. You are welcome to visit us at Linienstr.14 in 42289 Wuppertal.

Our expertise at the service of customers

30 years experience
The mkt metal and plastic GmbH is an innovative, customer-oriented company with a focus on the production of metal-plastic composites and demanding thermoplastic plastic parts and their construction. The foundation stone was laid in 1996 by a successful MBO with 30 years of experience in the tooling and plastic molding.

We offer our customers solutions for the thermoplastic injection molding, simple parts to complex assemblies with overmolding of metal and parts in 2-shot molding components. We control quantities from prototype to series production parts with million parts per year. We develop solutions for the most varied of tasks in the automotive, office furniture, aerospace, medical and automation industries.

Competent troubleshooting
Discuss with us your problem. Through competent partner in the fields of design, tooling and plastic injection we offer optimal technical and economic solutions. We implement the solution found by the design to mass production.

Flexible and customer-oriented
We are always there for you and advise you. We respond individually to their needs and show you tailored solutions with all our expertise.

HEAVY - It's EASY for us!

Pro-Moulding has over 30 years of experience in the field of plastic injection molding and has been characterized by precision, quality awareness and speed from the very beginning.

Our high quality infrastructure guarantees a full service from mold and product development to serial production and numerous services.

Through the motto "hard comes easy to us " the company has developed as a relevant partner mainly in Austria, Germany and Hungary. With an ultra-modern machine park in the high tonnage range, even the largest components can be easily implemented.

We supply well-known equipment and component manufacturers in the outdoor, industrial, office furniture, medical technology and automotive sectors.

Pro-Moulding employs about 100 people and is a company with a very solid financial background.

With our modern machinery we are specialized in the production of large volume plastic parts.

Our employees and the consistent implementation of the motto 'hard comes easy to us' are the success components for high customer satisfaction and growth.

We process common engineering plastics such as ABS, POM, PA6.6, PPS, PBT, PP, PMMA and many other materials on 10 modern robot-controlled ENGEL machines with clamping forces from 88 kN to 2300 kN and shot weights bigger than 10.000 g.

Our unrestricted goal as a company (team) is to be an A-supplier for each of our customers and thus a partner.

To meet this claim, the continuous improvement of our processes (CIP) as well as the regular auditing of our quality management according to DIN EN ISO 9001:2015 is a matter of course for us.

Our quality claim starts with the preparation, is accompanied by regular and random checks, internal and external audits and is ultimately supported by the high motivation of our employees.

Certified according to EN ISO 9001:2015 and EN ISO 14001:2015

A direct contact person, supported by digital processing and confidentiality agreements, is part of a successful cooperation.

Since our founding, Protec Industries has established itself as a leading company in plastics processing and mechanical engineering. With a clear focus on innovative solutions and customer satisfaction, our experienced team has continued to push the limits of precision.

At our core is plastics technology, specialized in the thermoforming process, with which we manufacture products of the highest quality, from individual pieces to large series. Our expertise in 5-axis CNC and 3-axis CNC contract manufacturing enables us to produce complex and sophisticated parts with exceptional accuracy.

Tool and mold making forms the basis of our manufacturing expertise, and we draw on many years of experience to develop tools that are tailored to the specific requirements of our customers. In addition, we offer comprehensive services ranging from product development and the construction of assembly workstations to the production of complete machines and systems.

RE.TT - Rehau Tool Technologie

We are the toolmaking company of REHAU AG + Co.
We have been active in the field of extrusion technology for many years and design and build extrusion tools for the areas of pipe, tube and profile extrusion. The products that are manufactured with our tools are used in medical technology, the furniture sector, in the automotive environment and in civil engineering and construction (pipes, window profiles). Based on decades of experience, we have excellent expertise in a wide range of applications and materials.

In addition to the extrusion tools, we also build gauges for various applications. Small gauges are used to test the products made with our extrusion tools, large gauges are used in the field of injection molding.

We are happy to support external partners and are open to all inquiries.

Founding of the company 2002
First commercial premises in Lovrenc na Dravskem polje
Experiences mean the future
We work with 15 years of experience and are constantly investing in new technologies.

We manufacture high-quality and sophisticated machine parts and offer a complete service.

Smater s.r.l. was born in 1981 as a company specialized in the production of injection molded plastic and rubber technical articles, which see their application in various industrial sectors.Quality, innovation, efficiency and reliability are the elements that have always distinguished us and allow us to relate excellently with major national and international players. We follow our customers step by step from design to delivery of the finished product.

SPR GmbH is a service provider for the production of turned and milled parts and your reliable contract manufacturer!

The strengths of our production lie in the production of individual parts and small series.

Regardless of whether it's turning, milling or turn-milling combinations, our machinery allows us to be very flexible for you.

The maximum travel distances for milling are 1,100 x 600mm and with 5-axis simultaneous machining, we can process workpieces of up to 1.2 tons.

On our lathes, we can produce chuck parts from the smallest diameters up to Ø800 mm.

Shafts up to Ø500 mm and a length of 2000 mm can be produced.

We have had our quality standards certified in accordance with ISO 9001:2015 with our QM system!

We provide machining services of unit parts, prototypes and short-run production. Problem-solving and provision of suitable machining solutions are what we do best. Our customers trust us because we are flexible with their enquiries and requirements, we deliver on-time and offer short- delivery times. This is what makes us stand out from the rest.
The precision parts that we produced are known for its top quality, due to the raw materials used. Our experienced and passionate personnel carry a high sense of responsibility towards our customers and their product.
We continue our expansion and growth, especially in technological developments. Our precision components are manufactured according to customer drawings, specifications and international standards. Design and production by reverse engineering method is also provided as a service.
And finally, we offer competitive pricing, guaranteed!

Our aim is to create products and process innovations using the simplest methods, state-of-the-art technology and attention to detail. Uncomplicated, fast and precise.
We develop and produce innovative solutions for the production of plastic injection molded articles.

We are a family business which has focused on the production and assembly of high quality plastic molded parts. In this regard, we also have core competences in the area of design, development, tooling and prototype construction. As a family business, all areas or tasks, eg from order processing to production and quality assurance, are closely interlinked. This guarantees a smooth production process and thus can respond to specific customer requests.

Our centerpiece, the "plastic injection molding", was rebuilt on the "green meadow" in 2016/2017 and expanded with state-of-the-art technology. We currently have 31 injection molding machines with a clamping force between 35t and 120t.
Furthermore, we are distinguished by the fact that we have been active in the toy industry for at least 15 years and as an A-supplier as an automotive supplier. Starting with thermoplastic foam casting over complex technical, micro and / or small parts and clear parts to assembly assembly, we can show plenty of experience. The production is certified according to DIN EN ISO 9001: 2015.