We are your competent partner in the field of turning, milling and drilling. In modern CNC machine tools we produce series and items made of steel, stainless steel, brass and aluminum.

Furthermore, we offer a heat and surface treatment.

We supply to companies in the following areas:

* Wind power
* Mechanical Engineering
* Window
Agricultural machinery industry
* Packaging industry

As an essential feature, we look at the high qualification and commitment of our employees. In this way we ensure the required accuracy and can also implement shortest delivery date ideas when needed.

We hope to have given you a good overview and would be delighted if you would consider us for your inquiries.

Production list

Quality down to the smallest detail!
We take care of the production in series - from small series to large quantities.
Our high-quality and modern technical equipment enables us to produce the most demanding pieces. Talk to us! We find the cheapest solution - without compromising on quality. We will send you a detailed and fair offer.

Rotate:
400 mm x 1000 mm (Automates to Dm 250 mm)

Milling and drilling:
500 mm x 400 mm x 2000 mm

Heat and surface treatment

We Henkel-Metallwaren are a company established in 1990 and modern equipped
CNC production.
We guarantee flexibility and punctuality with high quality.
At www.henkel-metallwaren.de you can get an overview of our company and machinery.

HEAT TREATMENT
IT'S RESPONSIBILITY!
Load-bearing parts, heavily stressed components or important
Constructions that ensure the safety of people and machines
must guarantee, do not allow compromises.
With HTM Härtetechnik und Metallbearbeitung GmbH and HIGH
HEAT GmbH will you find a partner who meets this requirement
determines daily actions.
With consistent investments, innovative manufacturing processes,
powerful plant technology and a team that is full of ideas
and we flexibly master every task, we are changing the standards
Our work is constantly moving up.
We are your partner for every case of hardship: From the smallest punching and
Turned parts to large components, from prototypes to mass production

We manufacture for you in the areas of sawing, turning, milling, drilling, grinding, gear cutting and grooving. In all areas we have experienced employees who have been loyal to us since the company was founded. In order to preserve and pass on this experience, we regularly train successfully.

Big and small, we can do both. Regardless of whether it is a small turned part or a large welded construction, we will manufacture it for you. Thanks to our wide range of machines, we have a high level of vertical integration, which enables us to offer our customers a wide range of components.

JG AUTOMOTIVE: Developer and Supplier in the manufacture of metal parts
JG Automotive was founded in 1982, dedicated to the manufacturing, development and supply of metal components for the automotive and industrial sector.

Thanks to the mastery of the technologies of manufacturing of metal products specifications provided by clients, we have diversified the industrial sectors of performance and optimized our work processes.

In 2002, together with 18 international partners, we created Global Alliance, a large group with 230 cooperative engineers, manufacturers in Brazil, Germany, China, India, Italy, Japan, Korea and USA, among others, managing a joint turnover of € 1,720 M.

Dozens of companies in the automotive, energy, railway, agricultural, elevation, etc. sectors, are already among our customers and fortunately for us every year we continue to grow thanks to the trust of our customers and the incorporation of new ones.

Our products are presented with their corresponding quality certificates (IATF / TS / ISO / CE / PPAP).

In short Technology and high competitiveness in products to specifications provided by clients.

TECHNOLOGIES: Forging, Casting, Machining, Stamping, Laser cut, Welding, Raw Material, Microforge, Microfusion, Fasteners, High Pressure Cylinders, Hydrogen cylinders for hydrogen filling stations, Toolings, Precision Bar Turning and Special Parts, Inserts and Profiles, Tubes SW and DW and Rod Formers, Springs, E-mobility, Precision Gears, Bearings, automotive plastic injection parts and Returnable packaging of metal parts.

SINCE 2009 ....

The company was founded in 2009 by Mrs. Bettina Landgraf-Kaiser, storage capacity today is about 3000 m² in three halls. As a leading warehouse distributors constantly about 100 cars and well-preserved machines of best brands offered.
State of the art warehouses with crane capacity up to 10 tons and forklift capacities up to 7 and highly trained staff are the benefits for potential customers to find the "perfect machine". Complete "all-inclusive" packages (eg transport, introduction, installation Complete training) are developed and implemented according to your.

MEMBER OF:
Since 2009 FDM - Germany
Since 2009 EAMTM - Brussels (International)

SPECIALITY: Cutting metal-working machines
Our specialty is the trade used machines from metal cutting. Whether conventional or CNC - controlled, we each offer the right machine for you.In CNC - area we act almost exclusively with the control type Fanuc & Heidenhain. Here we can give you the best - provide service, whether coverage with qualified staff, service staff or software solutions.

OTHER:
Furthermore, even spare parts - remakes produced directly in the house with us. Through years of experience of our employees in the cutting process on Fanuc & Heidenhain controls, we can therefore offer cost effective replacement parts alternatives you.

Small, young company from Slovakia. We are focusing on precise parts with small tolerances. Owner of a company is also a programmer and setter, with more than 15 years of experience in machining, many years of experience are from foreign countries. Our motto is "quality by any means". We are selling only 100% precise and good parts, we never had any complaints from customers. We never had to repair any parts. We do check every part, it means our control is 100%. We are honest and transparent. We are looking for customers with the same quality properties.

The company SC MATEC CNC TECHNIK SRL, was founded in April 2005 by Mr. Adrian Kreiner, having as main activity the production of parts for the automotive industry. The company operates in a space rented in Sibiu, based on a team of 5 employees and a processing center with numerical control.

SC MATEC CNC TECHNIK SRL has as main object of activity General mechanical operations CAEN code 2562, with activities of turning, polishing, milling, reaming and welding of metal parts using machine tools with numerical control and / or conventional techniques and devices.

With our experience in various casting techniques and finishing processes of various casting, we have been active in the market for more than 40 years. We support and relieve our customers and offer the possibility to deliver a complete product, from processing to after-treatment.

Our mission

We focus on designing, manufacturing and delivering a total package of products. You can call on us for small and large work, but you can also use a certain processing or finishing process for your products. We are happy to be your adviser and partner for all your castings, whether it is a single piece of product or a larger series of products.

We cast, melt, rotate milling, assemble and construct your product exactly as you wish. We place high demands on our quality. With us, a product does not leave the warehouse until it meets all the requirements regarding the mechanical properties and conditions. That way you can be sure that you will receive the highest quality at a competitive price.

Since 2006, the company Bergbauer has established itself as a flexible and competent supplier of engineering and electronics industry in the field of metal cutting.

With modern machining centers and tools to the latest technology, we can meet the different requirements. Our expertise lies in milling and turning of the item production to series production.

The range of services covers the entire range of cutting tools to be processed materials, from plastics to aluminum, all kinds of non-ferrous metals and steels.

Our young and flexible team of qualified staff is made up of technicians, skilled workers and trainees in the fields of mechanical engineering and machining


Through continuous quality control, modern measuring devices and controlled manufacturing processes from receiving to shipping, it is possible always deliver us high and consistent quality.

As an innovative company and a partner in industry, we manufacture since 1990 complex CNC turned and milled parts in highest precision out of all machinable materials in small, medium and large series ago. We provide our customers with our years of experience and an extensive expertise in the manufacture of complex supply parts and assemblies.

Our precision work is appreciated by many industries such as Automotive and vehicle construction, furniture industry or the machinery and plant, at home and abroad.

Our machinery consists mainly of modern CNC precision lathes, CNC milling as well as the form and bar lathes. These mechanical equipment ermöglischt us not only an appropriate standard of quality, but also a high degree of flexibility in meeting individual customer requirements.

Technical Trading Dreh-/Fräs-und for sheet metal parts

Precision rotary parts, - milling and ground parts (Ground parts)
- Transmission shafts (drive shafts) to 1500 mm, hollow shafts, rotor shafts
- Flanges (Intermediate), bolts, fittings, machine components
- Cells wheels, worm shafts, knife shafts.
- Guide rails, shaped pillars

Machine Knives Knives industrial Press Brake
- Perforating, squeezing knives, shear blades, packaging knives. Knives for plastics industry, mill knives, textile knives, sheeter knives, crush cutter, foil knife, knives, tungsten carbide blades, serrated blades, welded-on blades, slitter knives, Plotter and other machinery knives.

Circular knife round knife
Circle diameter (round blade) are rotating tools that can be (with counter-blade) was used with a knife cut or shear cut method. Circle diameter (round blade) can be produced for different applications from different materials (stainless steel, tool steel, HSS or stainless steel).The particular design can customized (eg ground on both sides, toothed, 2-wading, etc.). There arise because different names such as, crush cutter, top cutter, bottom cutter, pen-knife, plate diameter, perforating circular knives, rotor diameter, roller blades, etc. In addition, we also manufacture the knife holder and knife shafts and induviduelle cutting devices. The regrinding of circular knives is almost always worthwhile.


Punching tools
Punching diameter:
Punching knife and cutting die are made from solid steel (eg tool steel 1.2379). The blades are hardened and ground. Punching blade made of solid material, are especially suitable for punching work with very precise contours as well as for long-term use, as they can be reground. Made of solid steel, we can also very small and precise punching knife and punching iron manufacture (eg samples dancing).
Dies:
We manufacture cutting knife and cutting dies from hardened steel strip and for a variety of punching tasks.Depending on the application, band knife made of spring steel, carbon steel, tool steel, stainless steel. Compared with the cutting knives made of solid steel, they are affordable and are suitable especially for disposable knives as well as large punch surfaces. We have stamping tools for individual tasks.


- Cutting die, die cutting knife, cutting knife for test specimens, punches, punching, stamping dies, Steel rule dies, punches,
- Cutting rollers, cutting mills, crushing blade
- Punches and dies, punches, forming punches

Flat - and cylindrical grinding
- Surface grinding, surface grinding up to 3000 mm length
- Cylindrical grinding up to 400 mm diameter
- Fine grinding, lapping, polishing
- Carbide Grinding

Roll manufacturing roll grinding and
- Rolls, roll cores, drive rollers, winding rollers, form rollers, fluted rollers
Nippers, the cutting rollers, roll forming, turning rolls

Development at the highest level
No compromises in quality and performance
From transmissions, axles, vehicle components, systems and kits to entire vehicles in the area of very small and small series, Oberaigner can draw on decades of experience and expertise.

Our expertise lies particularly in the entire vehicle powertrain, including axles and axle suspension, in particular in the area of all-wheel drive technology and special transmissions for special applications.

Oberaigner is a long-standing system supplier to the automotive industry, certified in accordance with IATF 16949. Through continuous development of our management and QA system, we can ensure the provision of services using the latest facilities and methods, both for our own developments and for our customers.

The components, aggregates, systems and vehicles developed by Oberaigner are subjected to extensive testing and testing in accordance with the latest standards in the automotive industry and in accordance with the specifications of our customers. When carrying out various tests and evaluating the results, we work closely with both clients and competent service providers, partners and scientific institutions in order to be able to offer our customers the best and safest product.

The company Officina Meccanica Bruegger srl (OMB) is situated in Como, a strategic point between Milan and Switzerland. For two generations OMB is specialized in the production of high-precision mechanical parts. Thanks to the continuous development in the production and engineering OMB has a complete and modern production and offers a complete service:

Our services:
• Design and Engineering of new high-precision mechanical parts.
• Realising of prototypes and samples
• Production of series
• Different surface finishing’s of the parts
• Assembling according to customers specifications
• Testing according to customers specifications

In the Engineering we use following Cad/Cam Systems: ProE, Soldi Works, Rhino, Sum3D und Pacw.

The drawing can be sent in following files: dxf, dwg or iges.

In the production we use metal and plastic materials as for example:

METAL
• iron
• stainless steel
• brass
• cupper
• aluminium
• Hastalloy
• Monel
• Other alloys

PLASTIC
• PVC
• POM
• PP
• TEFLON
• PEEK
• VESPL
• PC
• PA
• Plexiglas
• Reinforced and not reinforced plastic materials
Of course we organise almost all surface finishing’s on request:

HEAT TREATMENT
• Hardening
• Cementation
• Nitriding


SURFACE TREATMENT
• Anodizing natural and coloured
• Hard anodizing
• Galvanizing
• Chromium plated
• Alodine
• Nickel plated, electrolytical and chemical

Since 2005 we develop with our partner companies, new approaches and innovative solutions for the production of technical parts and assemblies. Our slogan "New Thinking! New action! New ways! ", We carry a competent and reliable contribution to your company's success. We advise our customers both during the product development process as well as the optimization of existing products in terms of the structural design, as well as on the use of suitable production methods and materials.
We specialize in rotary swaging, spin forming, cold forging, machining (cutting all kinds), sintering, MIM, hot forging, stamping, deep drawing, sheet metal forming of all kinds, die-cast zinc, cast aluminum, cast iron, fasteners, ductile iron, cast iron and lots more!
We enable potential costs through the re-design of your purchasing parts with the help of TRIZ methods, value analysis and Attributive sourcing.

Unsere Maschinenbauproduktion: Ab dem Jahr 2008 hat unser Unternehmen eine neue Produktionshalle mit Metallbearbeitungsmaschinen mit Kooperationsaktivität aufgebaut.

Die mehr als 200m2 grosse Betriebshalle beihaltet eine CNC gesteuerte Fräsmaschine des führenden Wekrzeugherstellers DMG MORI SEIKI

Unser Unternehmen fokussiert sich auf die Einzel- und Kleinserienproduktion von Industriemaschinen, Subgruppen und Einzelstücken

Unsere Strategie ist den ansprochsvollen Anforderungen unserer Kunden durch professionelle Dienstleistungen entgegenzukommen. Wir zeichnen uns durch Proaktivität und Flexibilität gegenüber unsererPartnern aus und verfolgen aktiv neue Trends und Technologieneuheiten im Bereich der Metallbearbeitung und Herstellung von Einzelkomponenten. Dadurch erreichen wir eine kontinuirliche Qualitätssteigerung von Produkten, Diestleistungen und unserer Wettbewerbsfähigkeit.

TURNING & MILLING experience since 1998
On our modern machinery
Our experienced team manufactures your turning and
Milled parts made of aluminum or plastic
exactly according to your specifications.
Specialized in opto-mechanical
In this area, we support our customers as
reliable partner with extensive
manufacturing expertise.

MODERN MACHINERY
Automated
manufacturing
Our experienced machine operators (f/m/d)
use modern and automated turning and
Milling machines for every day, workpiece
for the highest quality workpiece for our
to manufacture customers.
In addition to manufacturing turning and
We carry out milled parts for our
Customers like to organize surface finishing
by suppliers and others
accompanying services.

Manufacture of precision machined parts and milling parts from all machinable materials.


CNC turning (up to D 90 mm rod)
CNC turning (up to 250 mm in the feed)
CNC long turning
CNC multi-spindle turning (32 axes)
CNC Machining Centers (5-Axis)


Batch sizes up to 1000 pieces .... Piece
including all subsequent operations up to the assembly


In the field of machining there are many different ways of working. One is the CNC machining. Through this method, the milled parts get even complicated 3D contours. The CNC machining is done with machines with up to 8 axes. CNC turned parts can be made of different materials. For machining titanium, copper, brass, plastic, aluminum, stainless steel and other materials are suitable. Rotating parts in general can assume unusual shapes. In particular, the CNC milled parts often see pretty spectacular. Through its 3D contours CNC turned parts have a special effect.The machining is extremely versatile. Machining technology is used in various fields. Lathe parts, especially CNC lathe parts, are very expensive to manufacture. To produce a CNC lathe part, one special machines and more time than the normal CNC turned parts needed.


The machining and especially the CNC machining requires a good education in the field. The partially very complex turned parts and just the CNC lathe parts require a tremendous expertise. A single CNC lathe part caused enormous amount of time. For these special turned parts, a particularly accurate work is absolutely necessary. For the purposes of machining are all chip forming materials. Depending on the material, the cutting is performed with different speeds. Are the turned parts made of wood, the cutting is done with high cutting speed and without cooling lubricants.Turned parts made of plastics, however, are processed at medium cutting speed. When machining water or alcohol are used for cooling. A special product from the metal cutting machines is the rotating part. Such automatic turned parts can be made from almost all machinable materials. Just like the CNC long turning parts of the screw-cutting without technical knowledge can not be produced. All machined parts require special machinery for the production. Rotating parts are to be finished by hand hardly. Are the turned parts made of wood or plastic, the machining is possibly still done manually, but with harder materials the use of expensive machining is necessary. To establish automatic turned parts, can not be dispensed with the machines. Automatic turned parts are usually ordered in enormous quantities and from extremely strong materials. Also for CNC turned parts is similar. This machining is simply too specific.

CNC turned parts requiring extreme precision. Turned parts of this type are mainly used in machine and plant engineering. These industries would not do without CNC turned parts, turned parts, and the entire range of machining technology. Milling Services, CNC turned parts, turned parts, and just such special products as a CNC lathe part are absolute precision products. As simple as the concept sounds cutting, this process but it is not. Cutting sounds like simple separation that hide behind it but also things like complex CNC turned parts or automatic turned parts, no one thinks at first. Without these highly intricate parts, especially without the screw-cutting work would be impossible in some areas.