We are a forward-looking medium-sized company
the metalworking industry.

Our absolute and uncompromising precision is very much in demand.

The Good GmbH in Dettingen currently produces over an area of 1,300 m² which now has 35 employees, high-quality and sophisticated turned parts to customer requirements, including all post-processing such as curing, grinding, electroplating surfaces in batches 100-20000 piece. Our main customers come from the fields of hydraulic and pneumatic industry, machinery and tool manufacturing, plant engineering and the automotive industry.

Turned parts up to 65mm in diameter we finished off the rack, larger parts up to 250mm as feed rotary part. Our modern machinery enables us to accurately and inexpensive to manufacture. The quality assurance is an important part of our company. This includes, among other things, the certification according to the new DIN EN ISO 9001:2000, which was completed in early January 2003.

Quality and precision:

We manufacture all machinable materials and the latest CNC controlled machines, high-quality precision parts, from single parts to large series.

Machining from bar complete with production of key areas by power-driven tools.

Complete machining on modern multi-axis CNC lathes and machining centers. Finishes: All rework, as well as surface and heat treatments

Chuck work up to a diameter of 250mm rotary parts of the rod: from 6mm to 65mm diameter and 500mm length

Here it's all about top quality ...

Quality means not only to achieve consistent quality standards, but to constantly develop new quality projections for our customers for us.
That is why we always strive to keep our manufacturing and quality assurance at the cutting edge of technology.

Our modern machinery with predominantly multi-axis CNC lathes, as well as highly trained staff allows us to manufacture high quality and sophisticated products to customer specifications.With years of experience and know-how
We want to convince you as a customer and sustainable.
If you want to produce quality, it must also be able to check. For this purpose, we use other than the conventional measuring and test equipment and computer-aided contourograph to measure complex outer and inner contours exactly can.

We are About our cooperation partners able all rework, and to carry out surface and heat treatments.
Thus, Our products meet a ready to assemble for our customers.

We produce with the most modern
Machines for manufacturing pre-finished turned parts for customers in the automotive, electrical and medical (ISO / TS 16949, ISO 13485, ISO 14001).
We process steel, nonferrous metals, aluminum, titanium and plastics,
On ... lathes, single spindle, multiple spindle and rotary transfer machines,
... In diameters ranging from 1 to 42mm.
For more information see www.hanitec.ch

As a manufacturer of high-quality machine components the habö CNC turning and milling technology has been operating successfully as a reliable partner in the industry since 1989. From the beginning, two employees of the production company has grown rapidly into a modern, medium-sized companies with over 100 employees. On a production area of 3400 m2, located in the North Hessian town of Rosenthal, habö manufactures customized parts and complete solutions for wide-ranging applications.

Its customers include the company habö internationally renowned medium-sized companies, major German companies and international corporations who defended the manufactured items worldwide. In this case, these parts are also in vehicles or airplanes, as well as components for mounting sensors or pressure machines to customized special equipment again. You can almost be sure that they have already used a product or machine, in which a piece of "habö" was located.

The development department of habö CNC turning and milling technology takes care of all problems in the field of metal processing and developed as well as individual solutions for you. In addition, a very successful self-products are developed, such as the already multi-award winning ISS - Internal clamping screw.
In order to reduce the time needed for the development and design relevant and to keep the process and costs as low as possible, sets habö taking advantage of synergies with other Group companies ultra-modern CAD systems and continuous new investment in machinery. In conjunction with the continuous education and training of its employees habö ensures the consistently high quality standards for the future.
Consequently, at habö the social responsibility of the company and its employees has a special value, which has proved not only the thanks for the high proportion of trainees by the Hessian Minister of Economics in 2007.

Together with the partner companies of the group böhl We provide them a probably unique in the SME range available. This comprehensive offering, böhl group referred to as "system house metal".


Below is a small selection of already-produced goods:

Secondment, axle, adapter ring, system logs, connection shoe, welding face, bayonet head, bayonet plate, roll of tape, base plate, bolts, brake disc, torch body, bushing, collar and plain bearings, cover, seal sleeve, spacer ring, pressure plate, adjusting, Eisventilkörper, eccentric, eccentric shaft, spring case, spring camp, flat stone, flange, flange bushing, guide, fork, seat ring, housing, pivot screw, sliding ring, retaining ring, lever, lever arm, heating nozzle, heat conductors, cap, catch, block, piston, pin, converter sleeve, crosshead extension, cooling mandrel, slide block, coupling ring, connecting rod, cam blank, labyrinth ring, Lagerflans

Heblac Technology Co., Ltd. is located as a company in Aachen.
Over the years, we mainly in the manufacture and coating of complex components that must be manufactured in multi-stage manufacturing processes, specialized.
We take responsibility to finished parts, including coating and Oberrflächenfinish.

Other editing options at a glance:

Large part machining
Complete manufacturing drawings according to their

Series production

Complete assembly production including paint / coating

Grinding:
Surface grinding
Internal and external cylindrical grinding
Centerless-
Profile Grinding
Honing

Surface coating:
-Chem. nickel-plate
-Anodizing & hard anodizing
Powder coat
-Galvanize
Plasma coating
Hard chrome coating

There are many years of experience in the grinding of
Carbide coatings (chromium carbide, tungsten carbide) and
Ceramic coatings.

Founded in 1882 by Alfred Charpilloz, HELIOS is dealing with the most difficult industrial challenges for more than a 120 years.

By paying a permanent attention to precision and high value-added activities, the different generations managing the enterprise led HELIOS to a balanced mixture of social spirit and modern technology.

HELIOS A. Charpilloz SA combinates today a century-long knowhow with the most advanced production facilities.

Consequently, 250 employees produce 120 millions parts each year on its sole production site located in Bévilard (Switzerland).

products

HELIOS A. Charpilloz SA is active in traditional and CNC turning, gear-cutting of wheels and pinions, secondary-operations on transfer machines and CNC turning machines and diverse assembling and finishing operations for watch components.

Our major activity sectors are the automotive and watch industries, electronics, hydraulics and medical applications.


automotive

Products
Components for turbochargers
Security parts for ABS and airbag systems
Components for automatic gear boxes
Technical data
Turning Ø 1-52mm on
220 traditional Tornos turning machines
40 CNC machines of different brands
20 transfer machines
30 secondary-operations CNC turning machines
Heat treatment installations


watch components

Products
Various cutted gears and pinions
Calendar circles
Components of the drum (excepted the spring)
Technical data
Turning Ø 1-52mm on
220 traditional Tornos turning machines
40 CNC machines of different brands
100 cutting machines, up to module 1
Rolling and rounding
Automatic and semi-automatic rivetting machines
Heat treatment installations and various finishing capabilities

electronics

Products
Sockets
Receptacles
Plungers
Barrels
Technical data
Turning Ø 1-52mm on
220 traditional Tornos turning machines, some of them with polygon-cutters
40 CNC machines of different brands
Heat treatment installations and various finishing capabilities

miscellanous

Products
Components for hydraulic systems
Micromotors axes
Cutted gears for micromotors
Screws for medical applications
Special parts for hearing devices
Technical data
Turning Ø 1-52mm on
220 traditional Tornos turning machines
40 CNC machines of different brands
100 cutting machines, up to module 1
Rolling and rounding
Automatic and semi-automatic rivetting machines
Heat treatment installations and various finishing capabilities

140 people. Chipping areas: turning and milling on modern lathes and milling machines. We believe in complete machining:
chipping grinding, and assemble. We process all machinable materials. Specialist for stainless steels, 1.4301,1.4571, 1.4404 or titanium.
See website: www.heppler.de