Are you an industrial company or a manufacturing sector? Then you benefit from our range of products at Werkslack, regardless of whether small or large components up to 6.5 meters in length, we paint for you for prototyping, small series, and mass production. Just painting the last surface or building up the entire paint from the base material, that's up to you.

Send us an inquiry by e-mail, call us directly or drop by our office so that we can discuss your project and prepare a calculation for you.

In two companies, based in Oetisheim, we currently have approximately 35 employees. Our operational area includes the powder coating and printing (screen printing and pad printing) of metal and plastic parts.

As a complement to our core business and to our customers to offer a complete service, we have developed a comprehensive system of production. In cooperation with you, we assume the purchase of raw parts, leave this edit to your liking of the respective companies, provide the perfect surface, apply the quality control and supply ready to install free home.

Our customers include the automotive industry (Audi, BMW, Daimler-Chrysler, Porsche, Bentley, Volvo and VW), the electrical industry (users and housing manufacturer), metal construction, kitchen and home appliance manufacturers, as well as writing instruments manufacturers and customers from the air- u Space.

We guarantee the long-term, value-preserving and decorative surface protection for your products, short delivery times and competitive prices for optimum quality.

In our modern production facilities (investment in 2005 in a new location with state-of-the-art pretreatment u. Coating technology) quality surfaces are created in Oetisheim, see the world, even as far as Mexico, buyers.

The primary criterion is and will remain our customers' satisfaction. This can only be achieved by a sustained high standard of quality, on-time production and delivery, and a trusting relationship with each other.

We, the Fa. WESA-dress Surface Technology GmbH, participated in the February 1977
our coating operation and have specialized in the treatment and
Powder coating of metal parts.
Meanwhile, we have expanded our range of services. This includes, inter alia, degrease, passivate and coating - even the most difficult part geometries - from the millimeter size up to size 2 x 7 meters in over 120 constantly restocked colors and types of powder. Four powder coating booths for the hand and an automatic cabin are available in two shifts available. Since 2013, we also have a KTL coating system for small and large series.
The pretreated by us and powder or KTL coated components are, inter alia, in the vehicles of the CAR, DAIMLER BENZ, VW, Volvo and products from SIEMENS. We guarantee our customers a consistently high level of quality and punctuality. Twelve years ago, our company was first successfully certified.Currently, we are ISO 9001: 2008 certified.

Our regular customers are convinced of our performance because that distinguishes us from other providers:

• Passivation (aluminum and zinc die casting)
• Powder coating
• phosphating treatment of steel parts
• KTL - coating
• Installation work of any kind
• Storage / picking of parts to be coated on call
• Reliable planning through delivery usually within just 3 days
• Fast and flexible machining from micro and small amounts
• Excellent value for money
• Machining
• deburring of any kind
• Welding
• Pad Printing
• CNC machining
• Trowalisieren
• Plastic processing for automobile (deburring)

As a supplier, we are a reliable partner for our customers in the semiconductor and electronics industries, the aerospace, medical, automation and hydraulic engineering.

You will receive high quality machines and precision parts according to design drawings and patterns in a single or series production.

Short delivery times, high quality and a fair price - that you can expect from us!

Services

Based on your technical drawings, please contact us promptly and flexibly your workpieces in the desired number and copy.

Here is a selection of the materials used as standard from us:

Steel: 1.4305, 1.4301, 1.4571, 1.0037, 1.7131

Aluminium: AlCuMgPb (2007); AIMg3 (5754); AlMgSi1 (6082); AlZnMgCu1.5 (7075); AlMg4.5Mn

Plastics: PEEK nature; PEEK mod; PEEK GF 30; POM; PTFE

Non-ferrous metals: CuSn8; CuSn6; CuZn39Pb3

Special materials: Titanium, Carbon

You need a different material? Talk to us!

We also offer a variety of surface treatments such as anodizing, chemical Vernicklen, chromating, powder coating and sandblasting.

The Wilh company has been manufacturing since 1939. With 40 employees today, Wernecke successfully fasteners as well as turned and milled parts (according to DIN, sample or drawing) for important companies in the automotive and agricultural machinery manufacturing as well as in the mechanical, motor and electrical industries in Germany and abroad.

Wilh. Wernecke does not see itself as a mere supplier, but wants to be a reliable, flexible and imaginative partner with a high level of know-how for its customers.

Modern factory equipment, continuous improvement of operating processes, close cooperation with our customers, a certified quality management system in accordance with DIN EN ISO 9001 and CAQ-guided quality control make us a strong partner in international competition.

Small and large series, individual parts or assembly parts are part of our range.



Wernecke is one of the largest manufacturers of fork heads, fork joints, turned and milled parts and supplies well-known customers worldwide in the automotive, mechanical engineering, electrical engineering, hydraulics, medical technology, brake technology and agricultural engineering sectors, as well as the wholesale of fastening technology. All customers appreciate the perfect process in planning, manufacturing, quality and shipping our products.
Our modern machinery includes the latest CNC lathes with powered tools and finishing machines for all machinable manufacturing processes.

We produce small, medium and large series. The range of services is as follows:

Outer diameter: 8 - 65 mm from the rod
65 - 120 mm as insert
Outside square: vkt. 8 - vkt. 55
Turning length: up to 200 mm
Production batches: up to 1,000,000 pieces

We process free cutting steels, input and tempered steels, ETG steels, and stainless steels. If you have any special material requirements, please contact us.

For years, we have been working with innovative companies in the surface and heat treatment industry, which produce in accordance with strict quality and environmental standards. We are able to meet our customers' demands for the latest treatment methods at any time.
We have been committed to high quality standards for years. A CAQ system implemented according to the latest standards and the met requirements of ISO 9001 guarantee flawlessly produced products. QM tools such as VDA/ QS 9000 sampling, FMEA and 8D report, zero-error strategy, requirements and customer requests for packaging, shipping and logistics, as well as KANBAN deliveries are no problem for us.
Helping customers with application issues.

Since its founding in 1970 Wilvo has continuously evolved. The result being its current prominent role in the supply industry.
Wilvo initially specialized in processing sheet metal parts and light construction and has grown into a important supplier for customers both in the Netherlands and abroad. Supplying a broad range of metal products, in large and small quantities, still forms the basis for Wilvo, but we like to look ahead too. Besides modern machinery, Wilvo possesses a lot of knowledge and craftsmanship. This allows Wilvo to complete both simple and complex projects within a short space of time.

ABOUT US
Fast, precise and reliable - with Maschinenbau Wolfrum your order is guaranteed in good hands. We have been a specialist in turning, milling, 3D milling and grinding since 1998.

With our CNC machine park we manufacture both individual and serial parts and are as flexible as you wish. We are happy to respond to your requests at short notice. Our team works in two shifts to ensure that even tight delivery dates can be realized.

With our many years of experience and excellent quality, we also support you in new developments, in the construction of prototypes and in the field of surface treatment.

But that's not all. Of course, we also take care that your products arrive where they are needed. We work closely with you to ensure that the delivery to you runs smoothly.

Maschinenbau Wolfrum - we deliver quality where and when you need it. We would be happy to provide you with the proof.

The company specialized at precise machining small and medium parts.

The story of success

ZNTK - Radom GmbH was founded in 1887. Since the company's founding principle of our is the constant development and modernization of the products offered. The products of our company are mainly intended for the railway industry. We specialize in the production of the valve elements that are used in train braking systems. Our mission is to deliver the parts for the rail industry, which have been manufactured with the highest quality. Our goal is to ensure the best delivery and prices to our customers.

Guarantee the highest quality

Our professional and highly qualified staff together with the experienced management guarantee the highest quality of products and services offered. Internal quality management system ensures the fulfillment of your refined quality requirements.

Width production possibilities

ZNTK - Radom Ltd. specializes in the production of parts and equipment that are used in the rail industry and the automotive industry.Our professional staff and the universal machines enable the production of parts and assemblies according to customer specification. We can also easily adjust our production capabilities to meet customer expectations. Thus we have the flexibility to accept various orders of the metal industry.

Our production capabilities include:

- Machining
- Ductile forming
- Heat treatment: Carbunieren and inductive hardening
- Electric melting and Gasschmelzscheiβen
- Surface treatment
- Sandblasting
- Painting
- Assembly

For the majority of our products, we use CNC machines.

Striving for the ever-evolving customer expectations, ZNTK - Radom GmbH focuses not only on the highest quality of offered products, but also on the search for new production solutions that satisfy the data reported by the customer's needs to the best level.