The company Officina Meccanica Bruegger srl (OMB) is situated in Como, a strategic point between Milan and Switzerland. For two generations OMB is specialized in the production of high-precision mechanical parts. Thanks to the continuous development in the production and engineering OMB has a complete and modern production and offers a complete service:

Our services:
• Design and Engineering of new high-precision mechanical parts.
• Realising of prototypes and samples
• Production of series
• Different surface finishing’s of the parts
• Assembling according to customers specifications
• Testing according to customers specifications

In the Engineering we use following Cad/Cam Systems: ProE, Soldi Works, Rhino, Sum3D und Pacw.

The drawing can be sent in following files: dxf, dwg or iges.

In the production we use metal and plastic materials as for example:

METAL
• iron
• stainless steel
• brass
• cupper
• aluminium
• Hastalloy
• Monel
• Other alloys

PLASTIC
• PVC
• POM
• PP
• TEFLON
• PEEK
• VESPL
• PC
• PA
• Plexiglas
• Reinforced and not reinforced plastic materials
Of course we organise almost all surface finishing’s on request:

HEAT TREATMENT
• Hardening
• Cementation
• Nitriding


SURFACE TREATMENT
• Anodizing natural and coloured
• Hard anodizing
• Galvanizing
• Chromium plated
• Alodine
• Nickel plated, electrolytical and chemical

Othni employs about 100 people and manufactures over 6000 square meters of production space parts made of steel, stainless steel and aluminum sheet.

We see ourselves as an active partner system.
Customer proximity is lived.

From the development, the first prototype of complex assemblies, through to series production, we offer our services.

A certified quality management completes our range of services.

Since 2005 we develop with our partner companies, new approaches and innovative solutions for the production of technical parts and assemblies. Our slogan "New Thinking! New action! New ways! ", We carry a competent and reliable contribution to your company's success. We advise our customers both during the product development process as well as the optimization of existing products in terms of the structural design, as well as on the use of suitable production methods and materials.
We specialize in rotary swaging, spin forming, cold forging, machining (cutting all kinds), sintering, MIM, hot forging, stamping, deep drawing, sheet metal forming of all kinds, die-cast zinc, cast aluminum, cast iron, fasteners, ductile iron, cast iron and lots more!
We enable potential costs through the re-design of your purchasing parts with the help of TRIZ methods, value analysis and Attributive sourcing.

TURNING & MILLING experience since 1998
On our modern machinery
Our experienced team manufactures your turning and
Milled parts made of aluminum or plastic
exactly according to your specifications.
Specialized in opto-mechanical
In this area, we support our customers as
reliable partner with extensive
manufacturing expertise.

MODERN MACHINERY
Automated
manufacturing
Our experienced machine operators (f/m/d)
use modern and automated turning and
Milling machines for every day, workpiece
for the highest quality workpiece for our
to manufacture customers.
In addition to manufacturing turning and
We carry out milled parts for our
Customers like to organize surface finishing
by suppliers and others
accompanying services.

Hi , here we give you the reasons to work with us :
Experience ; we are an small team of 11 working together since 2014 , we started provided reparations services for industrial machines ,as Romanian machines are old :) and spare parts impossible to find in 2015 we have started milling and turning to make the necessary parts .
In house designed , manufactured and installed the parts for our customers :) .
in 2021 we started milling parts for welding robots in auto industry as a subcontractor . We have build parts for robots to Audi , WV , Renault , PSA , Volvo and in 2023 for the shiny new Tesla plant in Berlin .

Quality of manufacturing :
-our milling machines are 2023 new :Haas Umc 750 and DMG FP3 ,
- we use Renishaw laser for 3D measuring the parts we produce
- based on our experience we understand the applications of parts produced and we can adapt the manufacturing process for the best quality of parts .
We monthly can mill in 5 axis up to 800 hours , and 400 turning CNC

"Precise for you."

With this quality requirement, we welcome you in the world of SERA Metallbautechnik. We not only commit ourselves to the highest precision in the production - our focus is on your unrestricted satisfaction.

As a long time supplier to the aviation and aerospace industries in the area of metal cutting, we can assert ourselves as a reliable partner of major air carriers. Through the use of innovative milling strategies as well as modern manufacturing machines in 5Axis area with associated automation systems, we achieve a high throughput and guarantee our customers consistent high quality. Established as a mechanical workshop at 01.04. 1973, we produced the first, Feierabend operation 'in the center of Stutensee-Blankenloch. Over the years, we expanded our production facilities as well as the machinery to now 20 processing centers located in the industrial area of Stutensee-Blankenloch. Through the use of modern technology we are able in the future to meet our customers to meet.

You can find information about the past here

We are a company dedicated to ugarisches sheet metal processing and exciting machining by machining centers for small and medium series ..
The focus of our work lies in the production of complex assemblies including assembly such as FTS, Heber and packaging machines.
Our machinery, we continuously expand and modernize one of the most modern in Hungary.
From single part production through installation to commissioning of the modules and machines, we can offer the full range of services you need.
Give us a try. We put an offer below that will convince you.

The medium-sized enterprises THIERBACH from Lower Hall near Heilbronn supplies
Companies from all industries as tailored solutions for the
Parts subject.

TURNING AND MILLING PARTS
THIERBACH processed according to your specifications, all machinable materials, including steel, stainless steel, brass, aluminum and bronze and precious metals and special materials for the aerospace industry.

SINTERFACE PARTS
For the production of sintered parts THIERBACH used exclusively powder with demonstrated high quality. Depending on requirements, the base material of various alloying elements are added.

Formed
In the area of formed THIERBACH offers various production options such as cold and hot extrusion. In addition, a mechanical, metal-cutting rework is possible.

PUNCHING AND BENDING PARTS
In the field of stamping and bending parts offers THIERBACH solutions of metallic and non-metallic materials that are manufactured on CNC machines.In addition, welding can
be performed.

LASER COMPONENTS
In the area of laser parts are available from THIERBACH steel, stainless steel or aluminum products with extremely high precision contours in different thicknesses.

CASTINGS
In THIERBACH you get castings in all major manufacturing processes: aluminum die-casting, aluminum sand casting, zinc die casting, copper sand castings or precision castings.

DEEP DRAWN PARTS
THIERBACH provides you with high quality deep drawn parts made of stainless steel, aluminum, brass, bronze, iron, chromium or copper, either as a single function template or as a large series.

ASSEMBLIES
Not just when you need a single part, but even with demanding assemblies, you can count on THIERBACH: in partnership, economic and logistical point of view.

CERTIFIED QUALITY
An important part of THIERBACH quality philosophy is the maximum quality assurance in the production of your parts and assemblies.

FACTS: QUALTÄTSSICHERUNG
- Certification according to DIN EN ISO 9001:2008
- Erstmusterprüfberichtenach VDA
- PPAP documentation
- IMDS entries
- Uniformity measurements
- Surface measurements
- Length measurements
- Measuring equipment management
- Sampling inspection according to AQL 1
- SPC tests

Possibilities of surface and heat treatments
Even when it comes ächen to the finishing of surfaces, THIERBACH provides organizational and economic advantages: Through partnerships with reputable companies you get:
- Modern production techniques
- Everything from prototype to mass production
- Different machining options and THIERBACH all the possible rework and surfaces.In this way long and expensive transport routes and the total cost per piece If omitted significantly reduced.

THIERBACH offers:
Galvanizing / / Copper
Passivation / / hard chrome plating
Burnishing / / Gilding
Dacromet / / Geomet coating
Cadmium / / Nickel
Chromate / / anodizing
Phosphating / / pickling / / Silver
Case hardening / / Inductive
Glow / / start / / Slot
Embossing / / Bending / / rubbing
Lapping / / honing / / punching
Engraving / / brushes
Polishing / / electropolishing
Grinding / / trowalizing
Sand and glass bead blasting


Flexible Logistics
THIERBACH is not content to create the correct part, but is only satisfied when you is this the right time and at the right place. Thus, for example, already taken in the packaging that it contains all the elements for a smooth production: Logo, number, barcode.

For Tresoldi & Casiraghi, producing quality is more than a mission; it has always been a true passion.
Since 1962, the year the company was founded, this passion has been reflected in the production of carpentry, which over time has won recognition on the Italian and international markets. A way of working that marked the transition from the craft dimension to the industrial and technological dimension in order to ensure competitiveness and offer only the best at always competitive prices.

Progress has been made not only in terms of the number but also in terms of the security of internal processes and respect for the external environment. A success that is thanks to the daily commitment of a group of people who are able to look at the challenges of the future with the same enthusiasm as on the first day.

The company employs personnel who specialize in welding, bending, stamping and assembly.
The welding work is carried out by qualified personnel who have the following qualifications:
WIG — MIG — MAG — ELECTRODE.

We are also able to issue mechanical test certificates and non-destructive test certificates.

As a technical trading company, we can offer you a wide range with our long-standing, certified manufacturing partners
Offer delivery program.
Our strengths:
automatic turning parts
CNC turned parts
CNC milled parts
CNC sheet metal processing (laser, punching, folding)
TIG-MIG-MAG welding
Stud welding, spot welding
Press-in bolts, press-in sleeves
assembly assembly
surface treatments
Electroplating, powder coating, blasting, grinding, pickling
CAD construction
prototyping
warehousing, logistics

Uniblech GmbH supplies well-known companies in the automotive industry worldwide as well as construction machinery and machine manufacturers in the area of thin sheet metal construction.

Our location is located in the southern foothills of the Hegau just before Lake Constance. Our focus is on laser cutting, punching, bending, welding and component assembly.

The entire production takes place on the most modern processing machines that are currently available. Always ready to make everything possible for our customers, we are always interested in problem solutions, custom-made products and new ideas.

UNIMET is an expanding metal processing company and was founded in 1975 under the name “Schlosserei Ausserhofer”. We carry out all metal work and are particularly specialized in series work, sheet metal processing and housing construction. Our production area is equipped with the latest CNC processing machines.

This and our highly qualified employees ensure rapid and high-quality production of the respective orders.

Our strengths lie in our high quality standards through professionally qualified long-term permanent staff, a high level of training, our flexibility, adherence to schedules, market adjustment and customer proximity.

Our corporate philosophy

FAST

Easy quoting and fast order processing characterize our customer relationships.

FLEXIBLE

Together with our customers solutions are fast and often unconventional developed on a partnership basis.

RELIABLE

We produce according to the requirements of ISO / TS 16949: 2009; delivery commitments are adhered to - guaranteed.

We are an approved supplier for the metal processing industry:

Building industry
Furniture industry
Automotive industry
Office equipment industry
Shipbuilding
Handling / logistics


With motivated employees, we produce on our modern machines and equipment important supplier products.

Your competent partner for manufacturing mechanical products on CNC-controlled processing machines.

VETEC Zerspanungs- und Feinwerktechnik GmbH has been successfully manufacturing complex mechanical individual products and assemblies for over 30 years. The focus is on both single-part and prototype production as well as series production for small and medium-sized quantities according to your specifications. We see ourselves as an innovative manufacturing company for high-quality precision engineering.
A creative team of highly trained specialists, technicians and engineers enables the efficient implementation of individual manufacturing services with consistently high quality.
Our motivation, continuous modernization of our machinery and close cooperation with our customers are the basis of our corporate success.

performances
As a competent partner for CNC machining, our long-standing customers particularly appreciate the close cooperation in optimising their projects for production and comprehensive advice on the selection of possible materials and surface and material treatments. We can draw on over 20 years of experience here.
Our specialty is primarily high-precision and complex components. We have a lot of experience in processing a wide variety of materials.
With regard to technical requirements and project management, we respond flexibly to the wishes of our customers.
We work for a wide range of sectors of the economy. Our customer base includes companies from the automotive industry, medical technology, aerospace, the electrical industry, many companies with innovative products, research and development companies and much more.

We offer you the following services:
CNC turning
CNC milling
Customization development and construction during production
Assembly of components
Finishing according to our service profile (see brochure and website)

Please allow me to introduce our company.

We are a Slovak company whose major production program is orientated to manufacturing of special and precise parts for machines, different kind of fixtures, stamping tools, dies/progressive tools and transfer tools.

We are a member of Rejlek Plastics Group in Vienna, Austria.

We offer you capacities and experience in design and production.
Our production is for the customers who are different tools and machine producers, special machine builders working in the automotive industry, electrotechnical and furniture industry and in automatization of industrial manufacturing.

If you are interested in cooperation with our company, do not hesitate to call us.

Yours sincerelly

Viena International
Slovakia

We are your partner in the conscientious implementation of your projects and in the area of qualified metal processing with high product and result requirements.

We are a small company, founded in 2007 company based in the center of Cologne. We are specialized in the production of precision parts from all areas and materials. From a single prototype to series, we use the most modern equipment of the highest quality.