Independent design office with the aim of being able to offer the customer a finished product.
My main focus is on device, machine and model construction.

Production of hydr. and mech. Fixtures for machining centers.
Production of cpl. Collet chucks, special chucks and collets.
Like production of special clamping and gripping jaws, as well as special tool holders
Gen. mech. Processing of type-dependent parts.

Familiar like the department next door.

Toll manufacturing with in-house manufacturing. Thanks to our close network of local partners, we are able to offer a far-reaching technological spectrum. We take over your labour-intensive assembly tasks and test systems individually.

Excerpt of our services:

1 Manufacturing by machining, bending/edging, laser cutting, welding
2 Assembly of components, assemblies, mechatronic systems
3 Process simplification through sophisticated procedures, simplification of the supply chain law, reduction of the throughput time from the idea to BANF.

MPH is the reliable partner for customers, employees and suppliers. MPH acts according to Christian values. The company is a sought-after employer and partner. Many years of cooperation with customers and employees confirm this.

Manufacturing without limits: turning, milling, eroding, grinding, engraving, laser marking, ... benefit from our hughe and various collection of machines on four locations.

Your stock stads by us - over 4.000 materials, alu, steel, stainless steel, titanium, tec. plastic, ceramic-glass, ...

We twist for you - ask for impossibilities, our sheet metal forming realizes it.

The word is colorful - our longterm experience of perfect surface finishes.

Quality is no accident - our optimized quality management.

Save paper, time and nerves - the best quality in the right place at the right time, all from a single source.

We look forward to all questions, not only to inquiries.

For more than 30 years Mühlbauer AG has been a proven partner for the provision of high quality precision components. It all started with a small lathe, from that we have developed into a globally operating company, which realizes all wishes concerning precision around the globe. From consulting, construction and prototype construction via manufacturing including surface finishing up to the installation of complex single components or whole machines, we have everything you will need for an optimum result.

We are a medium company from the model, mold and tool making.
We have 8 CNC - milling machines run in two-shift operation. There are a wide variety of materials, processes both via CAD / CNC and conventional.

We design in Catia V5 and Tebis and manufacture both pre-production and series tools. Our tools are among others also performed with pneumatic, electric and hydraulic. In addition, work is also very strong in development and prototype construction.

Among our range of services: Foaming of soft foam, PU, GMPU, electrical systems, photovoltaics, etc., foundry model, body model and fixtures, fixture, machinery, extrusion tools, sheet metal stamping dies, stamping dies, injection molds, Cubingteile of aluminum and plastic, laminate molding, etc.

- MRT Mechatronics has established in 2013. Our company offers engineering solutions about robotics & automation.

- MRT Mechatronics specializes in precision CNC machining of small to large size parts in steel, stainless steel, aluminum and other alloys.

As specialists in metalworking and surface finishing, we turn thin sheet metal into precise shapes. From sample production of components to small series production, as well as the production and assembly of system components, we are regarded as a competent, reliable and long-standing partner for renowned companies in medical technology, analytical technology, optical electronics, safety technology, sensor technology and aerospace technology.

All from one source!

Aluminum and mild steel of course. Tool-and chromium-nickel steels, titanium and carbon fiber, no problem.

Send your CAD data as STP or VDA data file. Then these parts on CNC lathes or milling machines 5 axis in compliance with the
EN 9100:2003 and the QSF-A manufactured.
The heat treatment and surface protection are carried out in close proximity to the MSM, according to the current state of the art.

You get ready to install components or modules!

Furthermore, the MSM GmbH offers the necessary assembly and disassembly tools.
For this production range also includes the fixture and thus the production of special transport units, among other container for turbines
and turbine spare parts.

We are experts in the latest CNC machining technology and perform accurate and timely manner our orders.
The parts produced in a high-tech process are subject to careful quality control according to DIN EN ISO 9001:2008.
We produce individual parts, prototypes, small series and take over at the request of the assembly of various components.

We have an a Powerful CAD with Inventor 2010 and CAM HyperMill V 9.7 to also elaborate items are working optimally.

We look forward to your challenge!

Portfolio

Saw
Machinery:
AMADA HA 250 band saw
Sectional area up to D = 250

CNC turning
Machinery:
DMG 500 Beta
Turning diameter 400
Turning length 500
Spindle passage 65
Spindle speed 5000 1/min

Mill
Machinery:
DMU 100 T
SK 40 32 magazine locations
Traversing X 1050, Y 700, Z 700
Speed 12000 1/min
B-axis +90 ° - 12 °

Hermle UWF 1202
SK 40
Traversing X 850, Y 630, Z 500
Speed 5.000 1/min

Deep-hole drilling
Machinery:
TBT T10
2 spindles, drill diameter 1-15,
Max drilling depth 250

Grind
Machinery:
Karstens
Internal and external cylindrical grinding machine
Centre height 175
Grinding length 650

ABA Surface Grinding Machine
Working area 300 x 700

Erode
Machinery:
AGIECUT 100
Working area X 300, Y 200, Z 250
Wire 0.03 to 0.3

Construction
CAD
2D - Autocad 2010
3D - Inventor 2010
To construct digital 3D models with
standardized derivative drawings

Programming
CAM
HyperMill version 97 SP2
for the generation of complex 3D NC programs
including free-form surfaces

Our family business was founded in 1991.

In addition to the locksmith, we have built a second pillar -
We act as suppliers to the industry in a variety of industries.
This area leads our son, Christoph Mueller, who has completed an apprenticeship as a toolmaker and a training to be a mechanical engineer.

Our services include:

CAD design: Processing of customer-specific files such as DXF, DWG, etc.

Milling and CNC milling: Dimensions 600 x 400 x 400 mm

Rotate: Ø 200 mm, length 500 mm

Drilling and tapping on a stand and magnetic drilling machines

Welding:

The following welding processes are used:

TIG, MIG, MAG, electric welding

Production on precise hole welding tables

Electrochemical pickling, polishing and signing