For over 30 years, we deal with the editing and production of finished precision parts from all common materials, and components and complete devices.



After we have expanded our machinery continuously over the years and modernized, we are now able to offer a very wide range of processing options in the field of machining precision parts manufacturing.



Our small, medium and large series production covers an area 3-65 mm diameter of the rod in complete machining (Axial - radial and tool support) as well as the range up to 600 mm diameter in food processing.



We manufacture according to your drawings or samples in batches of 10 pieces, including patterns and 0-series, to 100,000 units.



For over 20 years we have manufactured parts for rotary connector systems. Our manufacturing facility in this area has been designed according to the requirements for the production of such parts.



We offer our customers the opportunity to purchase fully pre-finished parts, including surface treatment, assembly of components to form units and a customizable delivery, tailored to further processing. We have carried zoom requirements, evolved in this area in recent years, according to our customers Interressenten and strengthened us to a system supplier.



Devices, special tools and special equipment are coordinated and adapted to the particular processing task, created by ourselves, so that a possible production to optimum, efficient and economical points of view can take place. For the control of these special facilities we have collected from the use of freely programmable PLC controls extensive experience and knowledge of the use and programming of such.



A computer-aided quality management system, we have installed and are thus able to document inspections during production.



We try to meet the different requirements and demands of our customers to be able to fulfill in every respect.



The parts manufactured by us find application in diverse industries. Essentially, these are the automotive industry with its direct suppliers, the electronics industry and switchgear manufacturers, producers of aggregates and systems for gas and control technology and the general mechanical and plant engineering.

Production of simple to complex CNC short and long turning parts, and chuck parts up to diameter 300 mm with modern equipment (since 2008, for example. Multifunction turning center OKUMA MAC TURN!), V2A and V4A are our strength but also cutting steel, aluminum and brass .. .

Batch size 10-100000 pcs

Milling on machining center to parts of size 500x500x500 at low prices from 10 to 10,000 pcs. Lot size

MUZ designed according to customer's requirement machinery, special purpose machines and implements its implementation to the final product or system as a complete package.
Due to the family-related Locksmith, we are also able to customize welded structures quickly and kostengünsig.
The bodyshop directly in the annex building permits without long transport routes to paint the machine components.

Our strength is flexibility and performance!

At this point you will get an overview of the company MUZ mechanical engineering and machining:
Design, planning and manufacturing of lathe parts, short lathe and CNC lathe and CNC milling parts are our core competencies.We are able to manufacture both prototypes as well as large production runs reliably and on time.
We build your machine, system, or like to only your module completely incl.all units, electrics, hydraulics and pneumatics.
Through our incredibly powerful machinery we are able to also realize your machines, special purpose machines, systems or assemblies quickly.

Come to us if you are around a professional partner ...
Require milling parts, CNC machined parts, Aludrehteile, aluminum turned parts, turned parts, short turned parts, CNC turning parts, dental machining parts, stainless steel turned parts, deburring, glass fittings, glass canopies, plastic machining parts, Grinding parts, point holder, lathe parts, glass fittings, glass point fittings, stainless steel end caps and machining.

Our knowledgeable staff look forward to your wishes and ideas. Do you need high-quality services, a sustainable service, expert advice and an easy and cost-effective processing? Come and join us, your MUZ engineering and machining, YOUR STRONG PARTNER.

Welcome to MV Blechbearbeitung ! In the north of germany we are Your reliable partner for laser cutting ( sheets an tubes ), punching and bending, Milling and Welding up to ready-to-use constructions.

The welding workshop with its high levelled qualifications will meet Your requirements - certified acc. ISO 1090 EXC 3 for steel, stainless steel as well as aluminium. MAG, WIG manual welding, laser welding upto 5 mm, robotic welding up to 500 kg piece weight at highest quality level.

We, the company “MWU”, produce high-quality CNC turned and milled parts on behalf of customers according to standard and customer drawings.
The main customers of our company are from the fields of mechanical engineering, intralogistics, agricultural machinery, equipment and apparatus engineering, etc.

After many years of experience in drive technology and gear construction, Net-Components GmbH was founded in 2003 by Dipl.-Ing. Tarkan Peker. It is a DIN EN ISO 9001:2008 certified company.

With our knowledge of the international market and with the goal-oriented way of working, we always strive for market-driven and customer-oriented solutions.

The execution of complex tasks in series production, medium and small series production, as well as prototyping is carried out on modern machining centers, which guarantee a consistently high quality and flexibly realize customer requirements.

We are able to make short-term as well as long-term investments depending on the order situation and thus secure the production with regard to quality, deadlines and prices.

One of the company's principles is to manufacture our products economically using safe and environmentally friendly processes and to meet high quality standards. Our striving for constant improvement and cost-effective production leads to the competitiveness of our customers.

We offer:
- Turned parts
- Milled parts
- Forged parts
- Complete assemblies

Small or large series

Special machine construction

We see ourselves as a full-service supplier with a focus on customer-specific operating units and offer the production of electromechanical assemblies and the procurement of all necessary components.
We support our customers in the realization of their products and produce them economically and in the highest quality.

Individual silicone rubber keypads ? A plastic housing for your electronic device ? A spring-contact magnetic connector with cable assembly or a complete handset ? We can do it all.

We see ourselves as a link between production plants in Asia and our customers in Europe. Our strengths lie in the technical advice and support of our customers projects and in a professional procurement, quality assurance and logistics. Our customers benefit from a variety of services such as:

- Technical support from the first idea to series delivery
- Optimization of technical specifications for product safety
- Development of cost reduction options
- Support in development & design tasks
- Technical tests and analyzes in the N & H laboratory

Through highly qualified German and Chinese engineers in our company, we communicate excellently with our customers and supplier, even about complex technical issues. On customer demand, we also can take over entire development and design tasks. A creative and dynamic way of working, as well as tolerance and honesty characterize our cooperation.

All products are manufactured by our long-standing supplier network in Asia. All production plants are certified according to ISO 9001, ISO 14001, TS 16949 and ISO 13845.

Manufacturing according to European quality standards at economical prices is our constant endeavour. With the aim of being an attractive long term business partner, we are constantly expanding our portfolio with new products and technologies.

Our customers include well-known German and international companies in the automotive industry, medical technology, telecommunications, industrial automation, building control technology and other industries.

Where is the highest quality, process reliability, smooth operation and process experience matters, develops and implements custom solutions NMH. Perfectly tailored to the individual customer requirements. With about 100 employees at its 88 367 Hohentengen we are marked by a performance-, medium-sized business culture. With qualified staff and modern technology, we ensure the expectations of our satisfied customers with our solutions.

The 100 menstrong special machine and plant engineering company NMH GmbH + Co KG in 88 367 Hohentengen is in Upper Swabia, district Sigmaringen, about 30 minutes away from the Lake of Constance and adjacent to the districts of Ravensburg, Biberach an der Riss, Balingen and Lake District.

Precision rotary parts, - milling and ground parts (Ground parts)
- Transmission shafts (drive shafts) to 1500 mm, hollow shafts, rotor shafts
- Flanges (Intermediate), bolts, fittings, machine components
- Cells wheels, worm shafts, knife shafts.
- Guide rails, shaped pillars

Machine Knives Knives industrial Press Brake
- Perforating, squeezing knives, shear blades, packaging knives. Knives for plastics industry, mill knives, textile knives, sheeter knives, crush cutter, foil knife, knives, tungsten carbide blades, serrated blades, welded-on blades, slitter knives, Plotter and other machinery knives.

Circular knife round knife
Circle diameter (round blade) are rotating tools that can be (with counter-blade) was used with a knife cut or shear cut method. Circle diameter (round blade) can be produced for different applications from different materials (stainless steel, tool steel, HSS or stainless steel).The particular design can customized (eg ground on both sides, toothed, 2-wading, etc.). There arise because different names such as, crush cutter, top cutter, bottom cutter, pen-knife, plate diameter, perforating circular knives, rotor diameter, roller blades, etc. In addition, we also manufacture the knife holder and knife shafts and induviduelle cutting devices. The regrinding of circular knives is almost always worthwhile.


Punching tools
Punching diameter:
Punching knife and cutting die are made from solid steel (eg tool steel 1.2379). The blades are hardened and ground. Punching blade made of solid material, are especially suitable for punching work with very precise contours as well as for long-term use, as they can be reground. Made of solid steel, we can also very small and precise punching knife and punching iron manufacture (eg samples dancing).
Dies:
We manufacture cutting knife and cutting dies from hardened steel strip and for a variety of punching tasks.Depending on the application, band knife made of spring steel, carbon steel, tool steel, stainless steel. Compared with the cutting knives made of solid steel, they are affordable and are suitable especially for disposable knives as well as large punch surfaces. We have stamping tools for individual tasks.


- Cutting die, die cutting knife, cutting knife for test specimens, punches, punching, stamping dies, Steel rule dies, punches,
- Cutting rollers, cutting mills, crushing blade
- Punches and dies, punches, forming punches

Flat - and cylindrical grinding
- Surface grinding, surface grinding up to 3000 mm length
- Cylindrical grinding up to 400 mm diameter
- Fine grinding, lapping, polishing
- Carbide Grinding

Roll manufacturing roll grinding and
- Rolls, roll cores, drive rollers, winding rollers, form rollers, fluted rollers
Nippers, the cutting rollers, roll forming, turning rolls

Nuova CAM has more than 40 years of experience in the fabrication of high-quality metal products from sheet metal, tube and box sections. We work with leading Italian and European customers within diverse sectors, including but not limited to food processing, packaging, medical, farmaceutical, personal hygiene and sanitation sectors.
At our modern facility located in Bastiglia (North Italy), in addition to standard metal fabrication services including CNC machining we offer also product design, assembly and integration and metal finishing.
Thanks to our engineering expertise, and manufacturing resources we can create extra value to our customers managing your supply chain and/or acting as a single source manufacturing solution for customers requiring complex sourcing, manufacturing and assembly. Our customers can rely on our complete service from concept advice and prototypes to continuous manufacturing and supply.

We are NWK TECHNIK, providing professional CNC services since 2020. Our advanced capabilities include:

CNC turning
CNC 3-axis milling
CNC 5-axis milling
Cutting in the 0-400mm range, including tubes and thin-walled profiles
Plasma and laser cutting
Water jet cutting
Welding

Thanks to our modern machinery and experienced team, we are able to meet even the most demanding projects. Our company emphasises excellence in precision and on-time delivery, providing customers with the highest quality services.

We work with both B2B and B2C clients throughout Europe. Our services are tailor-made and our flexibility allows us to adapt to the individual needs of each client.

We invite you to work with NWK TECHNIK - your trusted partner in precision CNC machining.

Albert Nowak
Owner

Development at the highest level
No compromises in quality and performance
From transmissions, axles, vehicle components, systems and kits to entire vehicles in the area of very small and small series, Oberaigner can draw on decades of experience and expertise.

Our expertise lies particularly in the entire vehicle powertrain, including axles and axle suspension, in particular in the area of all-wheel drive technology and special transmissions for special applications.

Oberaigner is a long-standing system supplier to the automotive industry, certified in accordance with IATF 16949. Through continuous development of our management and QA system, we can ensure the provision of services using the latest facilities and methods, both for our own developments and for our customers.

The components, aggregates, systems and vehicles developed by Oberaigner are subjected to extensive testing and testing in accordance with the latest standards in the automotive industry and in accordance with the specifications of our customers. When carrying out various tests and evaluating the results, we work closely with both clients and competent service providers, partners and scientific institutions in order to be able to offer our customers the best and safest product.

We are a small family business that was founded in 1995. Currently, six people are employed by us. Our core competence is the mechanical processing of metals on CNC machines:

* Rotate
* Automatic turning (bar)
* Long-turn
* Polygonal / Umrunddrehen
* Teeth
* Milling

Our products are used:

Apparatus
* Auto industry,
* Railway industry and Schin vehicle
* Hydraulic us pneumatics industry
* Mechanical engineering
* Paper and printing machines - (rolling diameter from 10 mm to 2000 mm in length)
* Control technology,

* Integration of the verschieder axes

At Kowala foundry, located in the heart of Chybie, we have been blending the tradition of foundry craftsmanship with modern technology for over 37 years. Founded in 1986, our journey has been one of continuous development, enhancing our skills and expanding our machinery to meet the evolving trends and demands of the industry.

We specialize in producing aluminum castings, utilizing both pressure and sand casting techniques, and are at the forefront of implementing cutting-edge technologies, including CNC machining and 3D printing. Our production processes adhere to the stringent standards set by ISO 9001:2015 certification, reflecting our commitment to quality and continuous improvement.

Our mission is to deliver products that exceed our clients' expectations in quality, functionality, and design. With our rich experience, dedicated team, and partnerships with trusted suppliers, we proudly serve both domestic and international markets.

At Kowala foundry, we believe that innovation, flexibility, and the ability to tailor our services to each unique project are key to our success. We invite you to collaborate with us and join our satisfied clientele.

OFARTECH is the trademark of Karabudak Metal LLC.

In 2010, We have get into CNC Machining service by producing customer-specific parts in the automotive, hydraulic and agricultural sectors. In 2016, We started to produce hot forging parts for the agricultural, automotive and hydraulic sectors and have also been providing CNC services in the defense industry since 2018. Our main production technologies are milling & turning and hot forging. As an additional technology, we have zamak alloy injection.

We also offer design and analysis services with our expert engineer staff. These services include detailed design (special machines, fixtures, apparatus) and structural analysis & optimization solutions. We have experience in providing special engineering solutions (cost reduction, technical feasibility, test system design) depending on the customer's request.

Our company has produced many qualified products and projects with its experienced and technical staff and constantly improves its product and service quality.

Since our establishment, we have been the guarantee of providing experience, validity and reliability to our customers.

Our basic principle is to deliver our commitments in a qualified, complete and timely manner, and we work with a focus on customer satisfaction by constantly improving all our necessary infrastructure, materials and quality processes for this purpose.

OFARTECH by Karabudak Metal LLC

OFFICINE AIOLFI Srl is an Italian company specialized in machining process of Turning, Milling, Drilling and Taping using modern and top class machine tools.

We are well equipped to machine medium and big series starting from the bar or from casting products or froging products.

We have expereince in suppling different market fields in particoular Automotive, Pneumatic, Oil-Hyraulics, Electrical and Electronic.

Officine Aiolfi normally serves the following sectors:
Hydraulics - Pneumatics - Electromechanical - Automotive - Household appliances - Gas - Other types

We are able to provide the following processes in-house:
Turning from bars from Ø 2 to Ø 65 mm - Standard turning up to Ø 350 mm - Machining centre processing of 600 mm cube - Transfer machining - Ultrasound washing - Cutting - Rolling - Tumbling - Insertion of bushes etc. - Wire, Electrode and Argon Welding - Painting - Mechanical assembly work

Materials processed:
Aluminium, Alloy and other steels, Stainless steel, Brass, Copper, Inconel, ETG 88, Teflon

Lot Types:
Prototyping, Pre-industrial, Mass production (medium and large lots)

Through carefully selected suppliers, we are able to supply:
Grinding - Heat treatments - Galvanic treatment - Nitriding - Special rolling processes - Slotting - Broaching - Electron discharge machining

The company Officina Meccanica Bruegger srl (OMB) is situated in Como, a strategic point between Milan and Switzerland. For two generations OMB is specialized in the production of high-precision mechanical parts. Thanks to the continuous development in the production and engineering OMB has a complete and modern production and offers a complete service:

Our services:
• Design and Engineering of new high-precision mechanical parts.
• Realising of prototypes and samples
• Production of series
• Different surface finishing’s of the parts
• Assembling according to customers specifications
• Testing according to customers specifications

In the Engineering we use following Cad/Cam Systems: ProE, Soldi Works, Rhino, Sum3D und Pacw.

The drawing can be sent in following files: dxf, dwg or iges.

In the production we use metal and plastic materials as for example:

METAL
• iron
• stainless steel
• brass
• cupper
• aluminium
• Hastalloy
• Monel
• Other alloys

PLASTIC
• PVC
• POM
• PP
• TEFLON
• PEEK
• VESPL
• PC
• PA
• Plexiglas
• Reinforced and not reinforced plastic materials
Of course we organise almost all surface finishing’s on request:

HEAT TREATMENT
• Hardening
• Cementation
• Nitriding


SURFACE TREATMENT
• Anodizing natural and coloured
• Hard anodizing
• Galvanizing
• Chromium plated
• Alodine
• Nickel plated, electrolytical and chemical