Well-known customers worldwide rely on the high quality and best standards of Haslach group.

From the company's history out Haslach has a deep understanding and knowledge of the materials used. This extensive experience is rooted in the minds of our more than 200 employees - and we are proud of it! For a successful company are good employees, each and everyone is looking for a specialist in the field. So it creates the Haslach group regularly to set new standards in sheet metal, steel, stainless steel / aluminum and composite materials technology.
Company founder Helmut Haslach makes now with his 30 years of experience as general manager for strategic decisions in the company.
Since 1999, supported by his daughter Marita Haslach-Then. A second generation graduate economist for Commercial Affairs

With over management in 2005, she is responsible for staff development, purchasing, organization and investment. A year later, Jürgen was then appointed as the third manager who drives forward the innovative, highly complex designs.

The Haslach group has for many years from their own apprentices. We are a qualified training company, and an intensive youth development is very important to us.

We bring metal into shape!
Your specialist for metalworking & production of complete assemblies

About us:
We face many different challenges every day. Our range of services ranges from classic sheet metal processing to the production of complex components and assemblies as well as the production of individual components.

Custom-made products and individual solutions round off our capabilities. Whether you are a craftsman or a bulk buyer – thanks to our versatility, we are able to meet everything according to customer requirements.

The company

The "Heinz Rohrich GmbH" comes from the existing company since 1981 "Heinz Rohrich - racing" out.

In 1996 the company was renamed "memotec metal and motorcycle technology" and continued in the current premises.

Due to the rapid expansion was relocated to Untergruppenbach 1998.
The new facilities now offered the possibility to accommodate two separate departments. Both divisions developed continuously in size and amenities.

In 2005 the name was changed to "Heinz Rohrich GmbH" was.
Due to continued growth, we were able in March 2007 relate a large private building in mite (commercial fishing area fields).

Currently, the Heinz Rohrich GmbH employs 10 qualified employees, which by means of continuing education for the best execution of all tasks.


Services

In the area of metal art welding structures of steel, stainless steel and aluminum are mainly manufactured.For use MIG, MAG and TIG processes come.
The maximum component size is about 3000x1500x1500 mm. The unit weight is up to 5t.

All welding work is performed on SYSTEM TABLES and ensure the best possible dimensional accuracy and angularity.

Our service includes material procurement, preparation, welding, straightening and plastering. Mechanical processing - including surface coating or surface coatings-is performed by partner organizations.

Another field of activity is the order and repair welding at nearly all weldable materials.

A special case forms DC welding of aluminum (reduced delay on machined parts)

The company Heinz Rhrich GmbH offers the following activities:

- TIG and MIG welding of aluminum and wrought alloys
- TIG and MIG welding of Cr Ni steels
- Repair and surfacing
- Manufacturing of complete assemblies
- Jig and troubleshooting
- Single and series production

The "Hennig GmbH, steel and metal products" in Pfullendorf, Baden (20 km north of Lake Constance), is a technically modern equipped, qualified family-owned business in the industry. The company specializes in the "cutting and assembly of series, single parts and assemblies", and is a reliable partner for a number of nationally known companies and corporations.

Mostly wrought and saw blank, Hennig manufactures components, which are used, among other things in the clamping means and commercial vehicles, as well as in textile machine or pump, engine and transmission technology.On a variety of visual and functional parts, this complex milling, drilling, turning and grinding processes with modern tools and machines are used. Reaches Process capability and ensures Hennig by a quality management system certified according to DIN ISO 9001:2000.

Production methods:

Flexibility through the manufacturing process in house as:
Turning point turning, CNC turning, milling, 5-axis machining, drilling,
Surface grinding, CNC grinding, cylindrical grinding, 3D Measurement
Spaces, grooves evacuate, evacuate gears, bumping, marking,
Sawing, cleaning, assembling, assembly of components, painting ...

Product examples:

• Range: VEHICLE INDUSTRY
Clutch and transmission parts, magnetic body, anchor plates,
Rotors, pulleys, drive shafts, deflection shafts,
Hubs, wheel hubs, swing axles, engine components ..

• Range: SPANNTECHNIK
Base jaws, jaws block,

We are an owner-managed company, the engineering services, manufacturing, finishing, assembly and product delivery offers everything from a single source. This concerns both the wage and foreign manufacturing and the manufacturing our own special equipment for the paper and paperboard manufacturing industry as well as special solutions for safety-relevant area.
With our security products, we are also the owner of many national and international patents.
Our machinery is constantly being renewed and the education and training of our highly qualified staff are constantly adapted to customer requirements.
The high degree of vertical in almost all of the processing steps to make us a reliable A suppliers. Benefit also from the high Hennig and comprehensive know-how. Flexible and perfectly tailored to your needs.

Our CNC milling machines can sizes up to 3600 x 2200 mm 5-axis milling process at the Round Table has 500 mm.
The rotary department has combined rotary milling machines with Y axis and driven tools and sub spindle.
Sheet metal working medium format and folding up to 3000 mm.
Powder coating 3000 x 1200 x 2000 mm unit weight up to 1000 Kg
Final inspection with Zeiss measuring machine Accura

Production of complex CNC turned parts with bar feed, lathe parts, shafts up to 1000mm, thermowells for temperature measurement, machined parts and complete assemblies for measuring and control technology industry and the energy sector

The company Hermann Sefranek GmbH & Co. KG was founded in 1885 and is now run by the fifth generation.

The company is specialized in sheet metal processing. The product range includes parts for suction, ventilation systems, pipes, special sheet metal parts and weldments.

The possible processing methods include laser and plasma cutting, punching and nibbling, edges, and much more rounds

Are processed steel, stainless steel, aluminum, titanium, copper, and other materials.

We are happy to advise you in the design of components or construct them for you.

With SolidWorks 2010, we have a powerful CAD system with which we can process all common file formats.

Hilger GmbH works as a developer and supplier for machinery and
Plant construction and the automotive sector. The areas of work include
Development and production of individual and series parts up to batch sizes of
one million, the development and construction of prototypes and assemblies, and
assembly work.
In over 30 years, Hilger GmbH has been able to develop extensive core competencies in
develop respective areas. The work is characterized by the integrated
product development. Direct collaboration between development and production
enables cost-effective product development, low production costs and
high product quality when entering the market.

HKR GmbH & Co. KG

The HKR GmbH & Co. KG is a subsidiary of Vaillant GmbH.

This medium-sized companies went on 01 January 2006 from the previous profit center heating at the location Roding forth. The reliable service manager of the parent company also acts as a competent partner and supplier for external customers of the heating industry, automotive engineering, and for the sanitary sector.

The 317 employees achieved a turnover of 52 million euros in fiscal 2007.

Core competence is the development and production of components, gas and water leading assemblies and turning and forgings for the heating industry and the assembly of modules. The products are manufactured with an annual capacity of 8,000 tons per year, mainly made of brass but also made of steel and aluminum.

WE PRODUCE SUCCESS!

Experience the precision and the success with the products of HKR.Put your project with confidence in our hands. We support all around - from design, through production to installation.

With over 40 years experience we can convince mainly in the following areas:
· Production and development of components
· Construction and installation of gas and water leading assemblies
· Turning and forging production for heating
· Assembly

Your success is accurately measurable with us!

WE QUALITY OF LIFE!

We take responsibility! But we live in an integrated quality management system, which we constantly improve and control. In the production test systems integrated and systematic and methodological measures guarantee us to produce the highest standard. Quality means for us to deal responsibly with natural resources. Environmental protection and safeguarding the future are critical components of our quality management.As our customer you are in working with us, especially one who: Complete security, they have made us the right choice!

Sustainable quality - piece by piece - sets us apart. For us, this also the appreciation and development of our employees. They turn us into what our customers expect from us, suppliers of living and quality of lived from production to assembly to delivery!

WE MAKE THE POTENTIAL TO LIFE!

Rigid routine is not us. We go off the front and living innovation through and through. Years of experience and the latest techniques to help us not to stop, but always think one step ahead for our customers.

Sophisticated programs and structured processes enable a consistent production chain. Right from the start, we can rule out this way many sources of error. A direct access of the employees involved in each project can be short-term changes at any time, allowing the use of different concepts.

We recognize your potential and develop together with you further. Experience completely new with HKR precision. We are your competent partner from the initial idea to the production stage!

Since 2019, our company has been producing components according to customer requirements. Predominantly these are welded constructions with or without machining and surface treatment.

We are your competent partner in the field of turning, milling and drilling. In modern CNC machine tools we produce series and items made of steel, stainless steel, brass and aluminum.

Furthermore, we offer a heat and surface treatment.

We supply to companies in the following areas:

* Wind power
* Mechanical Engineering
* Window
Agricultural machinery industry
* Packaging industry

As an essential feature, we look at the high qualification and commitment of our employees. In this way we ensure the required accuracy and can also implement shortest delivery date ideas when needed.

We hope to have given you a good overview and would be delighted if you would consider us for your inquiries.

Production list

Quality down to the smallest detail!
We take care of the production in series - from small series to large quantities.
Our high-quality and modern technical equipment enables us to produce the most demanding pieces. Talk to us! We find the cheapest solution - without compromising on quality. We will send you a detailed and fair offer.

Rotate:
400 mm x 1000 mm (Automates to Dm 250 mm)

Milling and drilling:
500 mm x 400 mm x 2000 mm

Heat and surface treatment

In 1982, Peter Sedlak, the CNC machining technology with an employee and three machines in Schwäbisch Hall. Were produced turned parts in small and medium-sized batches.



Over the next few years, additional machines were added. The number of employees rose steadily. An increased demand for pre-finished parts made the first purchase of a conventional milling machine and a CNC machining center later inevitable. So it was always close in the rented hall and the desire to own a larger hall and getting stronger.



In December 1991, finally, the company moved to Untermünkheim-Enslingen so that in January 1992, production could be included in the new hall.



The economic downturn slowed in subsequent years, the growth of the company. But it soon went up again. Until 2000, all machines were replaced with new, more modern.



In 2000, the certification according to DIN EN ISO 9002 was carried out.



As of January 2002, the company operates under a new name. Peter Sedlak and his longtime collaborator and master Friedrich Schiele founded the



Hohenlohe precision parts GmbH.



Today, 12 employees produce pre-finished parts and assemblies for many satisfied customers from different industries. Various grinding work, as well as heat and surface treatments we have them implemented by competent and reliable partners.



The reward for good quality and very little complaints are our satisfied customers.

The company "Horjak-PRECISE" Domžale doo was founded in 1990, but the beginnings date back to 1957.

Very soon after the foundation was started to establish direct links with European companies. For this the CNC machining and machining products are manufactured according to the drawing in the field.

Mainly working Horjak-Precise DOO Domzale for companies from Europe, the focus is on Austria, Germany, the Netherlands, Hungary, Spain, Poland and the UK.

The production range includes the production of

-Precision metal parts for brake systems, rail and road vehicles
-Various rollers and shafts for printing machines
-Precision-engineered metal products for the optics
-Various machine components for other industrial sectors

Mainly are the strengths in the manufacture of turned and milled parts in small and medium series. All products are subjected to both intermediate and final inspections, strictly according to the ISO 9001 specifications

Since March 2006, the company is angesidelt in a new production hall on 6000 square meters and has about 80-100 employees. It is working with about 30 different partners.

Our motto is: "We strive for perfection."

We Henkel-Metallwaren are a company established in 1990 and modern equipped
CNC production.
We guarantee flexibility and punctuality with high quality.
At www.henkel-metallwaren.de you can get an overview of our company and machinery.

Since 1996 we have been manufacturing high-quality products, mainly for agriculture.
In addition to sheet metal and tube processing with press brakes or mandrel bending, different manufacturing technologies are available for welding assemblies and surface treatment, such as blasting with glass beads or the high-quality dry- and / or wet-cutting.

Our quality awareness has always been a guarantee for satisfied and longtime customers since the company was founded. We are also pleased to convince you of our abilities.

We are a company with an average of 10 employees. In the area of turning and milling, we produce small to medium quantities and prototypes. Furthermore, we are active in special machine and fixture operates inclusive development and construction.

Four successful supplier companies whose core competency precision turning. The Hutzel DrehTech GmbH in Steinenbronn / Böblingen, the Hutzel Seidewitztal GmbH Liebherr City / Dresden, the Hutz-EL sro in Klasterec nO / Czech Republic, as well as
HandlingTech Automations-Systeme GmbH in Möhringen / Stuttgart.



Turned parts of 1-200 mm in diameter up to 1000 mm in length are made from all machinable materials by drawing from prototype to series. Even the most modern materials from the aerospace industry to be processed, even titanium, tantalum and zirconium



Robots, handling solutions and concepts for site security through production
rationalization offers the HandlingTech Automations-Systeme GmbH (www.handlingtech.de).

Every company works best when all employees are happy to do their job every day and with a great deal of commitment.
Just like ours: A well-rehearsed, down-to-earth team, an uncompromising approach to quality and the right mix of experience and youth.

We supply ready-to-install components, including the required surfaces and heat treatments, including Empb, CoC, CMM measurement protocols.