In 1877 the company was founded Uebele. Since then the company has grown steadily and today offers the complete program around the punching technique. We manufacture high sophisticated tools, high-precision fine blanked parts, stamping parts, bending parts, stamping and deep drawn parts and metal pressing parts. The assembly production and the production of small and large series are part of our extensive range of services.

For our national and international customers, we manufacture complex parts on the following presses:
- Deep drawing presses 400-4000 kN (table size up to: 2,000 x 1,300)
- Automatic punching 400-6300 kN (table size up to: 3,000 x 1,500),
- Fine blanking presses from 1,600 kN to 3,200 kN,
- Pressing machine to Dm 900 x 5 mm
- Press brakes up to 1,500 mm long

Materials / Materials:
Steel, stainless steel (1.4301 / 1.4571 / 4310, etc.) and non-ferrous metals
such as aluminum, copper, bronze and brass, and substance capable plastics.
Sheet thickness: 0.05 mm - 10.0 mm
Coil: 300 mm x 10 mm and 1000 mm x 8 mm

Product Line / products:
Fastening systems for photovoltaic systems such as roof hooks, shielding,
Cell connectors, mugs, fittings, spacers, flanges, housings, holders, sleeves,
Contacts, discs, covers, clamps, braces, disc springs, angles and gears

Toolmaking
The following services offered by our professional expert toolmaking:
- Project development to series production
- Tool design
- Prototype production
- Construction of composite tools, drawing tools, stamping tools, bending tools,
Fine-cut and cutting tools as well as devices

Subsequent processing
- Vibratory grinding, brush deburring, drums, tape loops with automatic feed
- Heat treatment - all standard methods (inter-stage hardening, Nitriding,
Hardening, and Nitrocarburizinga)

Surface Finishing / Surface coating
- Powder coating, KTL, painting
- Electroplated coatings of Au to Zn / Ni (chrome plating, galvanizing, burnishing)

Assembly production
As a system supplier, we offer our customers from different industries all from a single source - from product development to the mounted assembly.
- Inert gas welding (TIG / MIG / MAG)
- Robot welding
- Stud Welding
- Spot and projection welding
- Pressure joining (Clinching / clinching)
- Riveting, caulking, gluing

What one associates with us:

Welcome to the UF Industries GbR.

For more than 20 years, we have been bundling the necessary skills for everything to do with drawing parts in a separate department. Our employees advise and support you in the procurement of tailor-made special and drawing parts and produce high-quality and precise turned, milled and combination parts for you according to drawings - even in demanding geometries and in small batch sizes.

Quality and function are our top priority. In order to achieve this, we are constantly developing ourselves and our portfolio. True to the motto: If you stop getting better, you stop being good!

Our aim is to be able to offer an efficient and optimal solution for every specific, mechanical-technical requirement based on a drawing or sample.

If required, we offer you fast and goal-oriented support in the realization of your constructions. Especially in the project phase, it is of crucial importance to choose the best, most modern and at the same time most cost-effective production technology. We would also be happy to optimize existing construction parts together with you.

Our corporate philosophy

FAST

Easy quoting and fast order processing characterize our customer relationships.

FLEXIBLE

Together with our customers solutions are fast and often unconventional developed on a partnership basis.

RELIABLE

We produce according to the requirements of ISO / TS 16949: 2009; delivery commitments are adhered to - guaranteed.

We are an approved supplier for the metal processing industry:

Building industry
Furniture industry
Automotive industry
Office equipment industry
Shipbuilding
Handling / logistics


With motivated employees, we produce on our modern machines and equipment important supplier products.

Consortium of companies operating in the development of foreign markets.
It acts as sales department for the export of a number of small medium-sized industries located in the Veneto region, all operating in the sub-supply in the mechanical industry.
Our partners can offer, among others, the following main operations:
• Turning
• Milling
• Grinding
• Gear Making
• Cutting and bending of sheet metal
• Sheet Metal Forming
• Assembly
• Complete Subassemblies

Operative Office in Corso Fogazzaro - Vicenza IT

Over 100 years ago William Pfleiderer founded his metal goods factory in Esslingen am Neckar. Today, in the third and fourth generation, the family supplies customers in the European and East Asian region. Its customers include all branches of industry which use formed without cutting sheet metal components in their products (power tools industry, automobile industry, mechanical engineering). Here the requirements vary from simple to complex stamping assembly.

Through our years of experience we are able to meet any customer requirements. We support you in the production-oriented design of drawing, stamping, bending and progressive parts and welding and assembly units and recommend the appropriate starting material.

Difficult geometries, manufacturing and assembly groups, small batches, batch sizes with millions of units, tight deadlines, just-in-time, Kanban, safety stocks, are a problem for many others.
For Wilh. Pfleiderer means that the orientation of the diverse customer needs.With dedicated employees, particularly flexible production organization and advanced punching and forming, we are prepared for a variety of tasks.

Drawing, pressing and stamping parts
After drawing, sample or individual information we produce stamped and formed parts of metal (eg steel DC01, DC03, DC04, St, stainless steel 1.4301, 1.4310, 1.4404. 1.4571, brass CuZn, Ms63 copper, aluminum AIMg3, Al 99.5 ) including the complete sequence processing (scrubbing, barrel finishing, grinding) and treatment (hardening, tempering, coating, galvanizing, painting) in the lot size you want. The result is simple washers and brackets to highly precise shifting parts, moldings to the automotive industry and mechanical engineering, complex series of composite parts, cylindrical drawn parts, housing and much more.

Assemblies
We are the perfect contact for sophisticated assembly and / or installation work. You order a completely manufactured and tested component with only one contact.We manufacture the items, take over the logistics of procuring needed to buy or standard parts and assemble the whole thing. Benefit from our decades of experience in the field of welding and assembly units such as in protective and hoods for the power tools industry. In this field, we manufacture and assemble a wide variety of sizes and designs for many well-known manufacturers. We can do this rely on our large inventory of own drawing tools, cutting tools, jigs, etc., saving you huge costs.

WKK Kaltbrunn AG - enormously in form

The beginning of the WKK Brunn AG is founded in 1967. As a dedicated tooling the company had at that time only one purpose: the production of cutting, bending and forming tools. Shortly thereafter, the fabrication shop was put into operation and some ten years later, the company introduced her first own product.

By continuity, innovation and perfection was out of the formerly peaceful Toolmaking a successful SME with about 45 employees.Today, the CHP is an international punching operation with most modern manufacturing methods in the supplier sector.

enormously complete - from the first idea to the final series, we offer comprehensive services

- Consulting: individual and professional, on-site or at our
- Construction: in-house with 3D Autodesk Inventor
- Prototyping: short to illustrate your ideas
- Tool: for punching tool and teaching building, with modern machinery
- Series production: stamping products of all types up to 250 tons of pressure and up to 300 mm width at 3 mm thickness (up to 5 mm after consultation) made of steel, stainless steel, non-ferrous and light metals
- Component manufacture: Total manufacturer of your products, automated assembly
- Post-Processing: Heat and surface treatments for partners near
- Finish machining: by machining (milling, turning, drilling), eroding and vibratory finishing
- Did you know? Also welding

We are a small company, founded in 2007 company based in the center of Cologne. We are specialized in the production of precision parts from all areas and materials. From a single prototype to series, we use the most modern equipment of the highest quality.

We serve as Automotive , HVAC applications , Sheet - Metal box Set. , Machining. and White goods sub-industry with Laser Cutting, Press Bending, Welding and Assembly processes. We process all quality stainless steel, aluminum, galvanized, titanium, lead and black materials in the most precise way within the desired dimensions and tolerances.

AB Umega is one of the largest metal processing companies in Lithuania. Company is focusing on technology, products development to meet the end-user expectations and needs. Employees are highly skilled; products are produced from high quality materials, using the innovative technology; all this leads to high level of quality, reliability and durability

Our experience working with Western Europe companies is over 15 years. The majority of orders comes from foreign customers and partners. We are always looking for new ways how to improve our business, how to be more flexible and effective and we are constantly looking for new partnership opportunities with new customers. We are open to the various cooperation proposals and we believe we can start mutually beneficial cooperation for your company.

We are skilled in various kind of Sheet Metal processing (CNC cutting, bending, punching, stamping, deep drawing), Mechanical processing (CNC milling, turning, grinding and etc.), Welding (robot MIG/MAG, manual MIG/MAG/TIG, spot, stud) and many other technologies Surface preparation and coating, Casting, Thermal treatment. We are also able to design and produce various tooling equipment.

We offer reliable, high quality metal processing subcontracting service. We suggest you to try our service prices and technologies by sending us few trial calculations and together evaluate partnership opportunities. Many mutually valuable relations have started this way.