Technical service, repair, repairs, remodeling and new construction of inland vessels on the Danube and Central European lakes; contract manufacturing steel processing

The "Officina Meccanica Gualco" has been working in the metal industry for 40 years and is specialized in
Turning, Milling, Threading, Broaching and Wire-EDM.
These areas are supported by a technical office equipped with CAD-CAM stations for design and calculation of
tool paths sent to the machinery.
With experience gained over decades of activity, we are able to manage the processing and production of a wide
range of mechanical components from 10 mm to 450 mm in diameter, with lengths up to 1200 mm.
We work in stainless steel, all the 300 and 400 series, and other types of materials such as: Alloy steel, Aluminum
and its alloys, Copper, Brass and bronze, Plastic, Super alloys and cast iron.
Quality control is the primary strategic objective of the production process and guarantees requirements met for
each product component.
Each step of the quality control process is verified by the instruments most suitable for a particular control.
Among our measuring equipment, we count a portable arm CMMs which is an accurate gauge. This tool allows
us to optimize the processes of control and dimensional analysis processes and moreover gives us the
opportunity to compare the opportunity to compare the products with the related technical drawing.
To provide the best service we follow the details of all manufacturing and production processes, from raw
material to finished product, taking advantage of partner companies to perform operations such as surface and
heat treatment, grinding and painting.
Our philosophy is expressed through passion for our work, innovation and reliability.
Customer satisfaction, the addition of support and ancillary services, and analysis and solution of problems set
us apart from other competitors in the market.
On the basis of the policy pursued, we have achieved ambitious goals, among our references it is a prestigious
factor to mention the Politecnico of Milan besides important names of Made in Italy for the chemical,
electromechanical, packaging, furnishing, health care, Industrial handling, oil & gas, motorcycle and
Shipbuilding.
We invite you to visit our web site to learn more about our company.
Thank you for your attention, we are waiting for your interest in this.
Team Officine Gualco
Mario, Licia, Werner and William

Officine Longon Srl is a company located in Maser, close to Venice and we are specialized in the manufacturing of components for the furniture industry.
Our expertise and problem-solving attitude allow us to be extremely flexible and versatile and to offer customised solutions.

Officine Parolin is located on the North East of Italy.
We employ 18 people and are specialised in the wire, tube, and stamped sheet processing.
Our core business has been the welding since 1985.
We mainly work on projects and drawings supplied by the customer.
Our flexibility enables us to offer many sorts of customised products:
from furniture, sport equipment, up to lightweight construction.
We work the following metals: Steel, Stainless Steel, Aluminium.
The cooperation with local partners grants us to supply the following services:
painting, galvanising, sating, anodising and other surface treatments, laser cutting on sheets and tubes.
The company is certified according to ISO 9001:2008 standards.
Small quantities to process is not a problem for us!

Welcome to Ohms Edelstahltechnik from Lügde. We are your strong partner in the field of stainless steel processing. As an owner-managed family business, we have been cultivating tradition and innovation since 1969. We are a master craftsman and a recognized training company. In our daily work, we attach great importance to quality and rapid implementation.

As a specialist company with many years of experience, we have a great deal of experience in the field of stainless steel processing. We rely on a high-quality machine park, which enables us to achieve the highest level of precision and quality. Our specialist staff, which consists of a total of nine experienced employees, is at your disposal for all your wishes.

“OIL AND GAS EQUIPMENT PLANT” LLC is engaged in the development and production of a wide range of equipment for the oil and gas production and refining industry, metallurgy, energy.
The enterprise management system is certified according to ISO 9001: 2015, ISO 14000, OHSAS 18001 (ISO 45001).
We would like to offer your company cooperation in the machining of metals.
Below you can see other types of work that we perform:
1. Turning (equipment: ST25, ST40HE, ST45 with the option "big bore", 1740RF3, 16B16T1, 1V340F30, 1510, 1531M, 1M63, 1A64, 1M65, 16K20, 16K40)
linear dimensions from 10 mm to 3000 mm, diameter from 10 mm to 1250 mm
2. Milling (equipment: VF3YT with rotary table HRT310, EC1600YZT four-coordinate FP17M, Heckert FSS-315, 6P83, 6T13)
linear dimensions from 10 mm to 16000 mm, diameter from 10 mm to 700 mm
3. Boring and coordinate boring (equipment: 2A622 with upgraded digital display 2A614, 2V440A) the sizes of a working zone are 1120х1250 mm
4. Drilling (equipment: 2C132, VO-63, 2532L)
the sizes of a working zone are 1100х2300 mm
5. Grinding (equipment: ZA164, 3M132V, 3M153, 3L722A, 3D711V, HSH83A, 3K228)
round grinding: linear dimensions from 10 mm to 2000 mm, diameter from 10 mm to 400 mm
flat grinding:: the size of the working area 1250x320x400 mm
internal grinding: linear size up to 1200 mm, hole diameter from 40 mm to 400 mm
6. Heat treatment of details according to drawings of the customer or the technical task.

Our sales department and service department are also available to quickly answer all your requests.
Please give us the way where we can contact on the issue of cooperation

OKUTEC is a medium-sized company
with 15-20 employees for the manufacture of turned and milled parts made of engineering plastics.
We are Kunststoffzerspaner and
-Turn
Milling
Saws
Drilling
or mount it to your specifications.
After drawing, standard or sample parts are as
Manufactured individually or in volume quantities.

Manufacturing and service program:



Construction, retail manufacturing, mass production of steel components, stainless steel components, light metal components and their assembly and repair. Manual operations in the wage. Small steel construction



Customer structure:



Automotive supplier industry, housing and construction companies, architects, local authorities, craftsmen, private customers

We are your competent and reliable partner in the field of modern mechanical manufacturing.

About 20 employees do everything the problems of our customers reliably solved.

With unsereren 18 CNC lathes and Fräsbearbeitungscentern and various process automation, we have an efficient machinery of the way you want it.

Our core competencies are:

CAD CAM programming
CNC programming dialogue
CNC Milling
CNC turning
CNC measuring
Assembly
CAD design and fixture

Our strengths lie in the procurement of raw materials such as: construction and stainless steels, chromium steels, titanium alloys, non-ferrous metals such as Dispal alloys, aluminum, brass, bronze production and assembly of machined and pre-finished parts.
We are used to handle us both individual orders and outline agreements and to deliver on time for appointment or Kanbahnsystem.

OMB Metalltechnik GmbH & Co. KG is an owner-managed, medium-sized company in the field of welding technology and metal processing.

We have been providing manufacturing services for well-known companies for over 20 years.

We are certified according to DIN EN ISO 9001: 2016 and DIN EN ISO 3834-2: 2006.

we are active in engineering production for foreign customer, according technical documentation.

We produce a various steel parts as are steel constructions, welded parts, machined parts ( steel tanks, steel pallets, storage equipment, parts for car lifts, docklevellers, shafts, flanges, steel frames, dipper buckets for excavators - various shapes and dimensions, etc. Our production - 100 % goes to foreign customers only. We prefer long term relationships and serial production.

We produce complete industry spraying mortar machines for Austria customer too, include water system, electric system etc.