INEX is a full-scope furniture producer with more than 10 years industry experience. For over a decade, we fulfill the highest standards of leading international retailers, consumer brands and furniture companies, with full in-house control of the whole manufacturing process.

INFIT was established in 1991 as a small family company which deals in metalworking. Since the very beginning, we strove to succeed in the market by offering quality products; thanks to this approach, we gradually developed and expanded up to our current staff of eight employees. Further expansion of necessary production facilities, especially erection of a new manufacturing hall.

We specialize in more demanding parts, especially from Al alloys.
Currently, we own 5 Deckel Maho and Bridgeport vertical CNC machining centres with HEIDENHAIN 530 control systems with max. axis movement 1000 x 500 x 500 mm.



We inspect the parts using WENZEL CNC coordinate measurement machine; it allows us to guarantee the required quality and tolerances of the products. As our capacities allow, we also measure parts for companies which cooperate with us, or for neighboring companies.

We utilize special services or air transport to deliver parts abroad. We pack the parts according to customer's specification (wooden crates, carton boxes).

We utilize established partners to provide surface coatings.

We want to thank you for visiting our pages and we believe that you will find valuable information in our Links section.

We are manufacturers of signage systems. With a high level of vertical integration, we produce almost all parts in-house.

The production
Speed and quality are only possible with this comprehensive in-house production depth:

sheet metal processing
of aluminum, stainless steel and steel sheets. Shearing, edging, round bending, CNC milling, welding, drilling, sandblasting, painting.

aluminum profile processing
sawing, CNC milling, drilling, welding, anodizing, painting,

welded structures
made of steel, galvanized up to 6 meters high, made of aluminum and stainless steel.

plastic processing
Mainly made from acrylic, partly from polycarbonate and from PVC. sawing, CNC milling, gluing, thermal forming, 3D contours.

paint shop
With our own color mixing system in over 3,000 recipes for individual color design in all RAL colors and in Pantone shades. Also using the NCS color system and as an anti-graffiti protection coating.

lettering
in large-scale digital printing on foils or as UV printing directly on solid materials, as well as with adhesive films. Engraved and raised tactile writing for the visually impaired, Braille and relief letters. Facade lettering made of stainless steel, aluminum and plexiglass, illuminated letters and banners, individual light boxes with decorated fonts.

integration
of electronic displays, screens and computers as media elements. Also letterbox systems and brochure holders. Call systems, outdoor and indoor display cases. Processing of glass plates for glass signs, from glass door signs to large glass stele.

The IMG mbH is a medium-sized company with 120 employees, which designed the world for technological lines in shipbuilding yards, designs, manufactures, assembled and tested.

Our technical possibilities we offer to make under the contract manufacturing at !!

* Steel construction (cutting of profiles and sheet metal, manufacturing subassemblies to about 12t)
* Mech. Machining of small and medium components and assemblies
* Assembly of modules (E-technology, hydraulics, mechanics)

We are open in our technical capabilities for everything!

Please ask us and see for yourself!

Translation by Google Translate

Our company located in Saxony has specialized in the production of quality parts and assemblies made of all materials.


CONTRACT MANUFACTURING

A comprehensive range of services guaranteed
You dimensionally accurate production from one source.
We offer you the following services
to:

• CNC milled parts with high precision and tight tolerances
• Specialist in custom milled parts
• Precision machining in small and medium series
• 3 - to 5-axis milling up to a size
• Simultaneous machining on 5-axis milling center
• Welding assemblies in steel, stainless and aluminum
• assembly
• Drilling and threading
• Surface grinding
• Test and measurement (3D)
• Surface treatment

CORE COMPETENCE

Work in accordance with ISO 9002
· Rapid response to your requests for changes during the job preparation
· Distortion-free supply of products made immediately mountable precision parts
· Competent and reliable partner
· Know-how of our employees is the most cost-effective, cost-efficient and productive customer solution


Quality management according to DIN EN ISO 9001:2008

Quality prevails

With this knowledge, we have been manufacturing high-precision mechanical engineering elements for customers in a wide variety of industries - individual components, assemblies and special machines, with which we have earned an excellent reputation both locally and globally.


The best for everyone

We would also be happy to convince you with our services. Flexible, dialog-oriented and on schedule, we weld, drill, mill and turn even the largest and heaviest parts according to individual specifications. No matter whether individually or in series, whether for small customers or corporations. Thanks to modern CNC machinery, a central tool management system, welding equipment up to 25 tons, well-trained and trained specialists and TÜV-certified quality management, we can fulfill almost every wish.


Precision "Made in Germany"

Our production is divided into two areas. In steel construction, a wide variety of metal structures are created under the hands of experienced locksmiths and welders.We complete them in machining: Here, competent machining technicians mill, drill and turn, e.g. bearing seats for gearboxes or complete underwater housings for propellers - always in the highest precision class. We do all the work ourselves (if desired, right up to the completion of entire assemblies); outsourcing is out of the question for us: the risk of quality fluctuations would be too great.


We do what you need

Your drawings and plans are decisive for us. But you can be sure that every step is carried out with the critical expertise of a mechanical engineer. Our strength is to think about the later use of the component during production so that it does its job perfectly. If you wish, we can start with this before production: Together with you, we will check your designs, make recommendations and also like to develop components yourself for the application you are planning.

Our company was founded in 1948 and has been owned by the family

From Mr. Rudolf Hartig after the Second World War with the production of curtain rods. Since then, the raw material was scarce was on cans from the American "Care - packages" resorted. They were then rolled up and cut into a continuous strip and is pulled into a tube.

Due to the settlement of the distributed Gablonzer from Jablonec nad Nysa (modern Jablonec in the Czech Republic) in the area of the former Austro - Dragoons - barracks in Enns the company Hartig became a supplier to the fashion jewelry industry.

This remained the case until Mr. Friedrich Zimmermann 1979 the company took over. The company was richer by a business through his experience in the field of construction. Mr. Zimmermann has recognized very early that the field of fashion jewelry in Austria has no future.

That's why the company established on the basis of in Steyr (20 km) Automotive industry has been restructured to a subcontractor this.This started with the delivery of various spare parts for production lines.

Among other things, we produce for you:
Covering devices, racks, shelves, distance teaching, Absteckdorne, Absteckvorrichtungen, Absteckwerkzeuge, support plates, Pullers, extractors, Abziehzangen, axles, adapters, adapter plates, stops, stop plates, Rests & bolts, recordings, locating pins, mounting plate, cradles, fixtures, balancing devices, ejection devices, Ausrichtbacken, Ausschleifvorrichtungen, thrust plates, blow pipes, bolts, width gauges, bushings, brackets pliers, CE - markings, cover, disassembly tools, disassembly pliers, spacers, pins, turning parts, turntable, rotating devices, pressure pin, die casting tools, plungers, nozzles, crimping tools, Applicators, Press-In, gages, Entriegelungszangen, retaining pliers, grease dispenser, Finish devices, pins, fittings, Frästei

Company Innoflex has as start-up companies a CNC woodworking machine and two gypsum-cardboard Frese machinery We, currently have spare capacity for series production in the field of wood and gypsum-cardboard panels-Verarbeitung.Unseren future customers we provide now a timely, competent and reliable production about.

We develop and create manufacturing equipment for the automation and streamlining of production processes.

Our services include the assembly of complete plants including controls and pneumatics in addition to the manufacture of single units and small series.

Our experience and creativity allows us to develop sophisticated solutions even for unusual tasks whatever the individual problem presentation. We work with state-of-the-art hardware and software and have 6 CAD/CAM workplaces.

Inno-Tec represents a clever combination of precision sheet metal and precision machining process in one company. All standard operations to specialized customization. Inno-Tec works by this combination innovative and cost effective. And of course, revolves around this quality. Quality applied in such a smart way that there is always existence of market outcomes. In short: quality where it belongs.

We are a medium sized company specializing in producing high quality machined parts and turned parts as well as complete assemblies. On modern machines, we produce a sophisticated range of parts for well-known companies.

Our philosophy is to always be in the selected segments of an innovative partner who manufactures in the field of CNC machining and as a system supplier (modules) parts with high demands.

With the constant expansion of our manufacturing capabilities to innotec could develop into a very modern and technically well-equipped company.

Through continuous investment in the latest technology, highest flexibility and professional processes, we have become a strong partner for our customers.

innotool & greminger ag is a contract manufacturer of orthopaedic implants and instruments for the joint replacement. Notable organisations rely on our experience in selecting and machining titanium, stainless steels and high performance plastics.

Our clients – medical device marketers – count on our competence in manufacturing and assembling as well as surface finishing, cleaning/sanitising, laser marking, packing and labelling.

innotool & greminger ag is certified to ISO 9001, 13485 as well as 14001 and is FDA registered since 2012 (FDA Establishment Registration No. 3010314800).

In our industry, ensuring the highest quality standards depends on smooth workflows.

With two elements we stand for this claim:
Team spirit and our extensive know-how in steel, aluminum and machining of plastics.
We gladly and always set for you! Give us a try!

The company "Innovative CNC - Milling" was established on 1 June 2000 founded by Volker difficulty.

At the present time, the workforce has 7 employees.
Production takes place with a total area of approximately 600 m² in a production hall.
The maximum total capacity is approximately 200 machine hours / week.


We provide all kinds of high qualified CNC machining in metal and plastic.

Our modern machinery and our extensive know-Howbei the machining of stainless steel, aluminum and plastic meets the highest quality standards. Precision is our passion.

We are cooperative, flexible, and reliable as they find it only in small establishments.

Skills, team spirit and fun at work characterize our workforce.

Here are your tasks in the best of hands.

CNC milling contract manufacturing

We can manufacture plastic, aluminum, brass, copper, steel, stainless steel and tool steel components using a 3-axis CNC milling machine.

Key data

Minimum component size: 7 x 7 x 7 mm
Maximum component size: 450 x 160 x 150 mm
Processing in the uncured state (steels)
Prototypes
individual parts
small series

Machining strategies

Milling
Deburring / chamfering
Drill
Tapping
Reduce
Rub
Thread milling
engraving
3D processing

Materials

plastic
Brass
aluminum
copper
steel
stainless steel
Tool steel