Manufacture of parts, components and assemblies of non-cutting laser cut parts for mechatronics.
Innovation in design, development and manufacturing for the following applications:
- Industrial Design
- Engineering
- Development, manufacturing, and maintenance of electronic controls and equipment for industry
- Turned parts up to 890 x 800 x 360mm
- Milled parts up to 1200 x 600 x 600mm
- Large parts machining up to 5000 x 1500 x 1200mm
- Profile grinding up to 6000mm
- Laser cutting and laser welding (2D and 3D)
- Sheet Metal Fabrication
- Welding of pressure vessels
- Laser hardening with diode lasers up to 4000 x 1500 x 1500mm
- Heat treatment of vacuum hardening, gas nitriding, carbonitriding, etc.
- Control Technology, Folientastauren, touchscreen
- Characteristics, Products Branding 3D
- Workplace optimizations
- Cost optimization of complex parts and assemblies through technology innovation
- Project studies.

-

Technocast is Turkish -Russian jv company located 80km west of Istanbul Turkey.
Technocast, with her sister company Kare Metal Form Industry and Trade Ltd. is a multi industry engineering company.

Our two major production focus are;

1)We are a full service supplier in the plastic injection molding technology.
2)We are experts on low pressure aluminum casting and have our own product brand Carre Wheels ( www.carre.com.tr )

Our capabilities include;

Plastic Injection Area..............................................

Product Design & Molding: We have a design office and 100molds/year manufacturing capacity tool shop.

Plastic Injection: Our machinery park consists of 24 injection machines from 50 to 650 tons(Krauss Maffei and Engel) We have a capacity of 3000tons/year rawmaterial processing

PaintShop: 3 lines - 2 for wet and 1 for powder painting (both for metal and plastic parts)

Serigraphy: Tampo Printing and Silk

Assembly: We have a competence in the assembly operation of components. Our major reference is Arcelik Turkish Coffee Machine ( http://www.arcelik.com.tr/heaters-and-cookers-coffee-machines.html ) We are the sole manufacturer of all plastic parts and assembler of the coffee machine.


Aluminum Casting Area...................................................

Low Pressure Casting
Machining (machine list attached)
Surface Treatement
Wet and Powder Painting




We are ISO 9001 accredited.
Also by November 2012, we will receive our accreditation for ISO 14001 and OHSAS 18001
We also expect to receive ISO 16949 in January 2013(already in process)

Tectri, a Swiss manufacturer, is offering expertise in precision machining for high tech industries up to 65 mm diameter (and 250x250x250 mm in block form). We are specialized in medical parts, micro-motors components, aeronautics, optics and other field of applications where tight tolerances and/or complex geometry are asked for. Our expertise is mainly in manufacturing titanium, aluminium, stainless steel, synthetics and other exotic materials.
We have already a long expertise in producing medical screws, bolts, plates, spindles, bodies, piezos, instruments, electrodes and others. We know your specific requests in regard to quality, traceability, surface roughness and surface finish, quality reporting. We are well equiped with state of the art swiss and japanese machine up to 11 axis. Deep drilling, whirling, high cutting speed machining, etc are common machining operations.
Swiss quality tailored to your wishes.

Tectum GmbH was founded in Asbach-Bäumenheim (Bavaria, Germany) in 2009, and after the premature completion of the new factory building including the master offices in November 2009, tectum GmbH started production in the field of painting for the aviation industry.
At tectum, mainly GFK / CFK components are painted as an "extended workbench" for the aviation industry. Our quality management especially for aviation is certified annually by TÜV Süd according to the current DIN EN 9100 standard.
In order to serve not only aviation customers, another production hall for the powder coating sector was set up in 2011. Since the start of production, we have regularly been coating one of the world's largest manufacturers and suppliers of tractors and agricultural machines.
In order to be able to optimally serve all customers - from large to private customers - Hall 2016 was expanded on the north side by a larger color bearing with adjacent compressor room.
In 2013 the tectum company managed to build a nearly 700 m² large hall extension for the area of wet lacquering.
Here in the 11.10 mtr. Long and 5.10 mtr. Wide painting and drying booths with a hoistway system and a combi-dryer mainly metal components for the aviation sector.
In July 2015, due to the high capacity utilization of the above-mentioned cabin, a smaller painting booth - with 6.10 mtr. Long and 5.10 mtr. Width - built and commissioned already in the middle of August.
A year later, an equally large painting booth with dryer was installed in this hall. Here, small parts are painted in the metal sector for aviation.
2017 is the construction of a new highly modern paint shop in an already existing hall planned.
Further information will follow.

Tectum offers not only pure surface techniques.

In order to offer our customers an "all-round package", we also take over transport, storage, assembly and commissioning activities in many areas upon request.

For over 25 years we supply German company with parts for the
Machinery and Plant:

complete assemblies as well as items
Welded structures with different functions
Sheet metal processing (eg, 2D, 3D laser cutting, plasma / water jet)
Special machines
Delivery of turned parts, sheet metal parts (eg including machine enclosures), guard
Delivery of complete machines with hydraulic and Eletronikkomponenten
Rollers and roller shells in different designs
etc.

We, the Textura GmbH & Co. KG in Germany and our subsidiary company, the Textura CZ sro in the Czech Republic are your competent partner for contract manufacture, components purchasing, design work and sales in Eastern Europe.

We have for 25 years directly involved in the Czech Republic and Slovakia and successfully support our customers in the procurement of mechanical parts and components.
Our engineers organize the selection of suppliers on-site and coordinate the production and logistics process.
The quality control is already taking place locally.

Through our engineering site we guarantee agreed delivery times, intensive quality control and market knowledge.

We follow the production steps in the Czech Republic and Slovakia on site, monitor timeliness and quality of and organize the packing and transport.

We know the right manufacturing company for you and have at our Czech contractors a great weight by bundling orders.
Therefore, we can easily realize smaller quantities and individual productions.

German trading company.
We buy in China on the basis of customer documentation (drawings, specifications) cost with their own buyers and inspect the goods before shipment to Germany by quality engineers.
Many years of successful experience, we have the shopping for our customers in the areas of:
- Machined parts with and without surface treatment
- Welded assemblies with and without mechanical processing
- Body parts, housings for machinery and equipment
- Mechanical engineering groups, machine frames
- Punching, bending and forming parts, deep drawn parts
- Sintered Parts
- All types of castings
- Granite Parts, polymer concrete parts
- Drawing specifications Fasteners and drawing specifications standard parts
- Bearings
- Harnesses.