Our customers are offered everything they need within our group of companies, all in one basket: from development and project management via the production of tools for plastic and metal fabrication, through to manufacturing the parts.

In this way we closely co-operate with our customers in developing functional structural plastic and metal components on the basis of the design, thereby achieving an optimum combination between plan, design, manufacture, and cost structure.

The integrated possibilities have enabled us substantially to shorten the project run up to the point of series production. The systems Pro-engineer and Catia, available to our staff, permit the creation of structural components and tools, "in one casting" as it were.


Injection Moulds Our staff in the individual manufacturing areas have state-of-the-art technologies and most up-to-date machines (such as 12-wire and 15-wire cavity sinking EDM machines) at their disposal. In producing moulds with a guaranteed number of shots, especially for the automobile industry and consumer electronics, our dictum is precision and quality.

This holds true for injection moulds, diecasting, duroplastic, two-component, rotating, transfer and insert/outsert moulds, just as much as it does for two-colour moulds, combinations of hard and soft plastics, automatic wire leads, in-mould decoration, and precision gear wheels.

Rapid tooling with the aid of our EOS metal sintering machine M250 Extended makes it possible to produce mould inserts for injection moulds and prototype tools within a very short time.


Eighty moulding machines in Vienna and Hungary, with a clamping force of between 25 and 1,100 tons, offer all the possibilities of manufacturing moulded, thermosetting and duroplast, gas-injection moulded, two-component moulded, insert and outsert moulded, as well as in-mould decoration parts.

Our machines are equipped with automatic robot systems, and automatic packaging lines complement the production line.

Vienna: 3-shift operation / technical products and precision parts with a mould clamping force of up to 500 tons,

Hungary: 4-shift operation / technical products and design parts with a mould clamping force of up to 1,100 tons.


Your plastic parts are coated in three fully automated painting lines on a water-soluble basis (single-component or two-component coating).

Your metal parts are electrostatically painted, from the smallest parts up to housing coatings for consumer electronics.

You would like to make metallic components additive? Are you interested in the possibilities of this technology?

With the additive manufacturing of 3D-printing metal (SLM, Laser-cusing®, DMLS etc.) we offer you a production technology that is no longer used only in prototype production. This process offers completely new possibilities where conventional processes such as laser cutting, turning or milling reach their limits.

This is a process that is used exclusively for the production of metal. As with 3D printing, the components are built up by layer-by-layer build-up and fusion of metal powder; the component has almost identical mechanical properties to the original material.
You need support in implementing your automation project?

Then you are exactly right with us! We realize complete manufacturing cells according to your idea. From the feasibility study on the construction and assembly to commissioning and on-site support, we are the right partner for your project.

In particular, we cover the following areas of responsibility:

- Project Management
- Programming
- 3D printing metal (additive manufacturing)
- Security management
- 3D scanning
- Milling technology
- Construction
- Assembly
- Hose packages
- Service
- Training

Our 3D metal printing services at a glance:

- construction work (cooling ducts, component optimization, etc.)
- Checking the cooling channel design (flow simulation, thermal images, flow analyzes)
- coatings
- Plastic prototypes
- Component measurement
- Creation of plastic models
- 3D scanning / reverse engineering
- fine machining (milling, grinding, eroding etc.)
- Surface treatment (anodizing, electropolishing, etc.)
- hardening
- welding

About us

Kreutz & Mock is a medium-sized company and the leading manufacturers of wire bending parts of all types. With over 3000 different articles we can offer our customers a wide and diverse range of different wire products. The necessary machines for the production are developed and built in-house by our own engineering department which gives us the possibility to always be flexible according to our customer's needs.

You can find further details about us and our philosophy on our website.

Products

We manufacture wire bending parts in all sorts of variations and models. We supply many industries with our products like the automotive industry, construction industry, agriculture, blinds manufacturers and many more. We also have numerous technical bent parts in our repertoire.

We are happy to try to achieve your specific needs and requirements, because quality, punctuality and being in step with actual practice are our basic principles to deliver high quality as well as best functionality products. It does not matter whether they are single quantities, small quantities or a large series. We are flexible and deliver quality at fair conditions.

We offer

+ Qualitycertficate DIN ISO 9001:2008
+ in-house specified tool construction
+ in-house machinery construction
+ quick production of samples
+ technical and experienced know how
+ skilled telephone service
+ large production spectrum

Materials

Every material processed in our factory has a dedicated inspection certificate that will be provided with your delivery on request.

We manufacture bent wire components for you in all variants and materials.

Here a selection of the materials used:
+ Stainless steel wire 1.4301, 1.4310, 1.4362, 1.4401, 1.4404, 1.4571 in different tensile strengths
+ Spring steel wire 0.9 mm to 6.0 mm. Qualities A, B, C, D
+ Steel wire C9D bare or copper-plated. C9D soft galvanised in 1.0 mm to 8.0 mm
+ Crapal wire
+ Becrosi valve spring wire
+ Silver and Palladium wire

Magepa offers advice as strong precision engineering partners, among others Spacers, leaf springs and metal liners for mechanical engineering at.
With over 50 years experience in stamping and forming, we have a deep understanding of the needs shall our customers.
We also carry pipe bending by and manufacture precision sheet metal parts made of spring steel strip. With our expertise and our technical creativity, we provide our customers with solutions such as individual leaf springs, shims unique, special spacers, etc.
Our standards are high. We want to understand you and your machine exactly. Together we will develop ideas and implement them with the latest technology. Precision engineering products for engineering such as metal liners and precision sheet metal parts made of spring steel strip, etc. are available in commercial quantities or as special.

Mario Fernando Group s.r.l. is an Italian company specialized in the cold deformation of metal sheet, in particular of stainless steel and aluminium.

with over 55 years of experience in the planning and construction of high quality dies our aim is to become a model for the processing of metal sheet.
We can realize dies for drawing, deep drawing, bending, trimming and blanking, according to the customer's drawing.

Mario Fernando Group s.r.l. offers the mass production of metal stamped parts: the dies are realized according to our customers drawings and the production managed to meet the customer’s requirements.

Our company proposes innovative solutions to the most complex technical problems becoming partner of our customer for the whole process of transforming an idea into a mass production work, even with the design of special machines according to our customers’ production needs, to give support that goes beyond the tool realization. This is what we mean with partnership.

Our company is ISO 9001:2015 and and IATF 16949:2016 certified.

We are a medium sized company and have specialized in the areas of tool and mold as well as special purpose machines, jigs and fixtures.
You will find our Operational 25 km from Hannover, Neustadt a Rbg .. in the district of Basse.
There you will find our experienced team of 65 employees.

We offer the following services:
Tool and Mould
Contract manufacturing in the areas of CNC milling (3/5 axis) and turning

 Product Development
 Prototyping
 2D/3D - Construction
 Tools and forms
 injection molds
 Punching tools and devices
 Individual production according to customer specification
 Special purpose machines
 machinery and equipment including construction
 Installation and commissioning on site

C. Melchers & Co. was established on January 1, 1806 in Bremen, where the global company still maintains its headquarters to this very day.

In the first few decades of the company’s history, over 30 ships sailed the oceans of the world under the Melchers flag, linking the ports of Europe, America and the Pacific.

In the 1860s, C. Melchers & Co set up operations in Asia, where all its trading interests swiftly moved. At the same time, with the onset of steam ships, it abandoned its own shipping business to devote itself entirely to extending its trading operations.

1866 saw the establishment of the first branch in Hong Kong, in the wake of which China began to develop into a key lynchpin for the company’s business. The ensuing decades were a period of rapid growth for Melchers in China, with over 2,000 people employed at 12 branches and plants throughout the country.

The First World War proved to be a setback for business relations, although business quickly recovered. It was not until the end of the Second World War in 1945 that business came to an almost complete halt. Even so, the company continued to survive, re-opening its first branches in Hong Kong, Singapore and Kuala Lumpur in the early fifties and gradually extending its branch network across Asia.

Following the opening of the Chinese markets at the end of the seventies, Melchers set up branches here again, underscoring the significance of Chinese business for the company.

With the establishment of a branch in San Francisco in the early eighties, the company also started to engage in US-Asian trade so as to gain a share of the rapidly growing trading relations between these two regions.

Trade with China remains a key focus of the company’s overall business, comprising as it does imports of special natural products and finished goods on the one hand and exports of plant, machinery and supplies for the Asian industry on the other. Yet, business with South East Asia has since also come to the fore, with the company amassing broad-based expertise in marketing and selling consumer goods in particular.

There are special departments for each article group in Bremen as well as at the foreign branches. They work largely independently within the overall company and are staffed by highly qualified experts. Over 1,000 employees in Germany and abroad assist customers and suppliers with their specialist knowledge. Rather than being based at the company’s headquarters, most of these employees are now stationed at subsidiaries, something which in turn reflects the company’s further development and the strategic alliances which it has forged.

We, Metallbau Schmalenbach, specialize in manufacturing a wide variety of high-quality and tasteful stainless steel and corten steel accessories. Years of experience in working with metal products, experienced know-how and the gift for exceptional design give our products uniqueness. The focus is on narrowing down to the essentials. In a charmingly flooded world, peace and relaxation are important to us. Simplicity is the goal and with it the uniqueness of our products.

In addition to our wide range of products, we also offer you the opportunity to have your ideas implemented. We offer you custom-made custom-made products. You are welcome to visit us at Linienstr.14 in 42289 Wuppertal.

- Manufacture of stamping parts according to sample or drawing to 1250 kN

- Manufacture of stamping parts made of copper, brass, aluminum, bronze, steel, stainless steel up to 3mm thickness from tape using electronic feed, up to 6mm from sheets or strip

- Manufacture of stamping parts made of non-metallic materials

- Point-and inert gas welding (MAG, TIG)
- Drilling
- Tapping
- Thread rolling, knurling +
- High gloss polishing by polishing rotary table (6 stations) or manually
- Supplier `s and-drag to 80 mm in length (even more grooves per part possible)
- Belt loops
- Mounting (single and assembly)
- Cleaning of stampings using cleaning machine
- Special solutions


In cooperation:
Laser technology (also 3D) laser, laser welding, Bending, CNC punching nibbling, turning and milling parts, surface finishing, tool

- Quantities of 100 units to 5 million units

Precision rotary parts, - milling and ground parts (Ground parts)
- Transmission shafts (drive shafts) to 1500 mm, hollow shafts, rotor shafts
- Flanges (Intermediate), bolts, fittings, machine components
- Cells wheels, worm shafts, knife shafts.
- Guide rails, shaped pillars

Machine Knives Knives industrial Press Brake
- Perforating, squeezing knives, shear blades, packaging knives. Knives for plastics industry, mill knives, textile knives, sheeter knives, crush cutter, foil knife, knives, tungsten carbide blades, serrated blades, welded-on blades, slitter knives, Plotter and other machinery knives.

Circular knife round knife
Circle diameter (round blade) are rotating tools that can be (with counter-blade) was used with a knife cut or shear cut method. Circle diameter (round blade) can be produced for different applications from different materials (stainless steel, tool steel, HSS or stainless steel).The particular design can customized (eg ground on both sides, toothed, 2-wading, etc.). There arise because different names such as, crush cutter, top cutter, bottom cutter, pen-knife, plate diameter, perforating circular knives, rotor diameter, roller blades, etc. In addition, we also manufacture the knife holder and knife shafts and induviduelle cutting devices. The regrinding of circular knives is almost always worthwhile.


Punching tools
Punching diameter:
Punching knife and cutting die are made from solid steel (eg tool steel 1.2379). The blades are hardened and ground. Punching blade made of solid material, are especially suitable for punching work with very precise contours as well as for long-term use, as they can be reground. Made of solid steel, we can also very small and precise punching knife and punching iron manufacture (eg samples dancing).
Dies:
We manufacture cutting knife and cutting dies from hardened steel strip and for a variety of punching tasks.Depending on the application, band knife made of spring steel, carbon steel, tool steel, stainless steel. Compared with the cutting knives made of solid steel, they are affordable and are suitable especially for disposable knives as well as large punch surfaces. We have stamping tools for individual tasks.


- Cutting die, die cutting knife, cutting knife for test specimens, punches, punching, stamping dies, Steel rule dies, punches,
- Cutting rollers, cutting mills, crushing blade
- Punches and dies, punches, forming punches

Flat - and cylindrical grinding
- Surface grinding, surface grinding up to 3000 mm length
- Cylindrical grinding up to 400 mm diameter
- Fine grinding, lapping, polishing
- Carbide Grinding

Roll manufacturing roll grinding and
- Rolls, roll cores, drive rollers, winding rollers, form rollers, fluted rollers
Nippers, the cutting rollers, roll forming, turning rolls

RUDA-Metall GmbH

The company RUDA-Metall GmbH was founded in 1982 and has its manufacturing focus in the area of technical stampings. Here components for the automotive industry and its suppliers and the electrical industry are manufactured for years.

The modernized about 2 years ago vibratory finishing system, we can achieve the best results even for your parts.

The tools are designed and manufactured in our own modern tooling.

In 1994, with the company K.Fr. Brahm, consisting since 1868, a group of companies founded. The K.Fr. Brahm manufactures focus: furniture fittings, hinges, stampings for light domes, scaffolding, electrical parts, office furniture and fittings for the mirror industry.

In order to work more efficiently and more cost effective for your customers in the future, the K.Fr. was Brahm 1-1-2006 integrated GmbH in the company RUDA metal.

Our Lord Dannhorn (Dip.Ing. Engineering FH and Dipl. Economics FH), as well as our technicians and master craftsmen to support you in the optimal and cheapest design your parts.

Rudi Göbel GmbH & Co. KG, based in Helmbrechts, is managed by owner & managing director Frank Pichler. The company was founded in 1957 and, with its three locations and 500 employees, specializes in the production and sale of plastic, metal and silicone solutions.

The extensive product range, as well as our own tool shop with over 100 specialists, includes precision components, weight-reduced high-performance components and system solutions for displays and controls. The offer is aimed primarily at power electronics, the automotive sector and industrial technology.

The high-quality and innovative products from Rudi Göbel GmbH & Co. KG impress customers from all over the world. In addition, the company offers a comprehensive range of services that combines all development, toolmaking, manufacturing, finishing and assembly work.

You can find out more about the services offered by Rudi Göbel GmbH & Co. KG on the company's website.

Founding of the company 2002
First commercial premises in Lovrenc na Dravskem polje
Experiences mean the future
We work with 15 years of experience and are constantly investing in new technologies.

We manufacture high-quality and sophisticated machine parts and offer a complete service.

We process metal with heart and mind

The proof of market relatedness and continuity
Since its founding in 1924, we maintain a thriving collaboration with numerous commercial and industrial companies. The foundation for mutual success is our long-standing experience and expertise, our unrivaled performance and our legendary reliability.

Our market and services
We solve the specific tasks with all our knowledge and the latest tooling technology. We support our customers with passion through all phases of a project, however complex and convincing a perfect solution, as well as cost and schedule adherence.

As a supplier in the field of punching, bending, pressing, we are equipped with latest machines and measurement techniques. Our strengths lie mainly in the tool Falling production for sheet thicknesses from 0.4 to 4.0 mm. In addition to manufacturing these parts further post-processing are possible in our home; trovalizing / vibratory grinding, cleaning, powder coating, painting.

Our core competencies in sheet metal processing (stamping, bending, welding, assembly, etc.) are the result of many years of experience.
Specific duties of our customers require individual solutions. We support our customers knowledgeable about all phases of a project, ie from consulting to product delivery. Here convince our services both professionally and cost comparatively as well as scheduled. Contributing a modern tooling and powerful resources at critical.

Our competencies
Development and Planning
Toolmaking
Punching
Assembly
Welding
Powder coating

Since 1991, Torgelower Metallwaren GmbH has stood for quality and know-how in the field of metal processing and tool making. Based in the heart of Western Pomerania, we were able to utilize the region's underestimated potential and develop into an internationally active company.
We offer our industrial customers from all over the world the highest standards in the fields of CNC punching, conventional punching, welding in all common processes, CNC milling, steel construction and product packaging.
As a certified company, we were able to convince clients from the automotive industry, environmental technology, construction, apparatus engineering and electrical engineering of our quality work with punctuality and maximum precision and have been counting them among our satisfied customer base ever since.
In addition to modern technology and equipment, the qualification and commitment of our employees are a central part of our company policy. The highly motivated engineers, foremen and skilled workers work as a team to meet the high demands of our customers. We ensure 100% quality of our products through targeted personnel development and consistent quality management.
We offer them individual, project-oriented advice through to technical implementation. In line with your requirements, we provide you with holistic products with maximum production accuracy and consistent quality.
The continuous expansion of our product range requires continuous modernization of the company's own machinery and production areas. By expanding our storage system into a modern high-bay warehouse, we can store the appropriate materials, semi-finished products and finished products on 460 pallet spaces and thus respond flexibly to our customer requirements.
We responded to the increasing demands of our foundry customers with the inauguration of our steel building in 2009. The new production area of 1,200 square meters and the corresponding equipment enable us to produce and process components weighing up to 20 tons. This makes us one of the few companies in the region that can produce in these dimensions.
With passion for our work and many years of experience, we take on any task in the metal sector.

In 1877 the company was founded Uebele. Since then the company has grown steadily and today offers the complete program around the punching technique. We manufacture high sophisticated tools, high-precision fine blanked parts, stamping parts, bending parts, stamping and deep drawn parts and metal pressing parts. The assembly production and the production of small and large series are part of our extensive range of services.

For our national and international customers, we manufacture complex parts on the following presses:
- Deep drawing presses 400-4000 kN (table size up to: 2,000 x 1,300)
- Automatic punching 400-6300 kN (table size up to: 3,000 x 1,500),
- Fine blanking presses from 1,600 kN to 3,200 kN,
- Pressing machine to Dm 900 x 5 mm
- Press brakes up to 1,500 mm long

Materials / Materials:
Steel, stainless steel (1.4301 / 1.4571 / 4310, etc.) and non-ferrous metals
such as aluminum, copper, bronze and brass, and substance capable plastics.
Sheet thickness: 0.05 mm - 10.0 mm
Coil: 300 mm x 10 mm and 1000 mm x 8 mm

Product Line / products:
Fastening systems for photovoltaic systems such as roof hooks, shielding,
Cell connectors, mugs, fittings, spacers, flanges, housings, holders, sleeves,
Contacts, discs, covers, clamps, braces, disc springs, angles and gears

Toolmaking
The following services offered by our professional expert toolmaking:
- Project development to series production
- Tool design
- Prototype production
- Construction of composite tools, drawing tools, stamping tools, bending tools,
Fine-cut and cutting tools as well as devices

Subsequent processing
- Vibratory grinding, brush deburring, drums, tape loops with automatic feed
- Heat treatment - all standard methods (inter-stage hardening, Nitriding,
Hardening, and Nitrocarburizinga)

Surface Finishing / Surface coating
- Powder coating, KTL, painting
- Electroplated coatings of Au to Zn / Ni (chrome plating, galvanizing, burnishing)

Assembly production
As a system supplier, we offer our customers from different industries all from a single source - from product development to the mounted assembly.
- Inert gas welding (TIG / MIG / MAG)
- Robot welding
- Stud Welding
- Spot and projection welding
- Pressure joining (Clinching / clinching)
- Riveting, caulking, gluing

What one associates with us:

VS steel GmbH has been active in the domestic market since 2012. Our core competencies are in the field of metalworking and toolmaking. Since the founding of the company we are constantly developing and expanding. We are constantly working on improving our production processes, increasing the production area and investing in state-of-the-art production technologies.
With us you get from prototypes to small series up to long-term serial deliveries. The company caters to all its customers, whether they are individuals, craft businesses or well-known clients in the automotive sector. Your satisfaction is our goal.
Reliability, precision and high quality are our top priority. We have many years of experience in the automotive industry, which enables us to put our customers' orders into practice using state-of-the-art technologies. Thanks to our many years of experience, we are able to develop unique solutions for the customer according to their requirements. We accompany you from the primary idea to the final product.
For reference, we refer to Skoda Auto AG. We are one of two companies that provides tooling services for the production of stamping tools for new models for Skoda Auto AG.

WKK Kaltbrunn AG - enormously in form

The beginning of the WKK Brunn AG is founded in 1967. As a dedicated tooling the company had at that time only one purpose: the production of cutting, bending and forming tools. Shortly thereafter, the fabrication shop was put into operation and some ten years later, the company introduced her first own product.

By continuity, innovation and perfection was out of the formerly peaceful Toolmaking a successful SME with about 45 employees.Today, the CHP is an international punching operation with most modern manufacturing methods in the supplier sector.

enormously complete - from the first idea to the final series, we offer comprehensive services

- Consulting: individual and professional, on-site or at our
- Construction: in-house with 3D Autodesk Inventor
- Prototyping: short to illustrate your ideas
- Tool: for punching tool and teaching building, with modern machinery
- Series production: stamping products of all types up to 250 tons of pressure and up to 300 mm width at 3 mm thickness (up to 5 mm after consultation) made of steel, stainless steel, non-ferrous and light metals
- Component manufacture: Total manufacturer of your products, automated assembly
- Post-Processing: Heat and surface treatments for partners near
- Finish machining: by machining (milling, turning, drilling), eroding and vibratory finishing
- Did you know? Also welding