we are active in engineering production for foreign customer, according technical documentation.

We produce a various steel parts as are steel constructions, welded parts, machined parts ( steel tanks, steel pallets, storage equipment, parts for car lifts, docklevellers, shafts, flanges, steel frames, dipper buckets for excavators - various shapes and dimensions, etc. Our production - 100 % goes to foreign customers only. We prefer long term relationships and serial production.

We produce complete industry spraying mortar machines for Austria customer too, include water system, electric system etc.

OMET Systems in Motion has been operating in the handling sector since 1963, designing and manufacturing wheels, bearings, components and integrated systems that find application in the widest range of industrial sectors. This is OMET's mission. More than fifty years of experience in the sector are a guarantee that few other companies can offer in terms of reliability and financial solidity. A guarantee that is further confirmed by OMET's choice to remain faithful to its origins as a family-owned company with strong entrepreneurial involvement and the presence of a young and close-knit team of managers, technicians and collaborators.
From the production of special "on drawing" bearings and linear guides, OMET has expanded its business in recent years, providing its customers with the design capacity, the flexibility of the systems and the technical expertise of the operating staff to offer complete solutions for the scrolling.

We are among the most important suppliers of products for the first use, mainly intended for manufacturers of tractors and heavy vehicles sector. Our production is based on the processing of components in full supply of steel,cast iron and raw with the primary objective of meeting the needs and expectations of the customer, through a continuous improvement of the product and supply systems, applying inside the 'Company Total Quality’.
OMG has developed steadily over time its technical and industrial capacity and is the undisputed leader in the production of customer-specific:
Axle shaft
Transmission shaft
Planet carrier boxes
Wheel axles
Exhaust manifolds
Differential boxes
Splined shafts
Front and rear wheel hubs
Reduction casing box
Steering control levers
PTO Casing
Brake piston
Steering knuckle
PTO Shaft
Wheel forks
Flession bars

OMG is today on the market as a supplier able to offer not only work, but a complete service that can start from the purchase of raw materials and ends with the supply of machined and assembled units.
Production processes related to OMG machining are:
Turning
Teeth /Hobbing
Milling
Drilling
Boring / Reaming
Broaching
Grinding
Induction Hardening Threatment
Mechanical assembly
Washing

I normally processed materials are: cast iron, steel.

We are pleased to present our company which is specialized in the production of ground spur gears.
Located in the province of Verona in Northern Italy, OMI BERALDO has been in the precision engineering market for about 50 years.

The company's three strengths are:

FLEXIBILITY – QUALITY - TECHNOLOGY

Flexibility is guaranteed by a workforce of 30 specialized workers distributed over two shifts and during some months of the year we are able to work three shifts to meet customers' needs.

Quality is guaranteed not only by painstaking quality control during the entire production process, but also by VISION 2000 certification from TUV.

Technology is assured by a range of modern machines which make it possible to produce ground gears up to class DIN 4.

Hob cutting mod. max 14mm Ø700mm
Fellows gear shaping mod. max 5mm Ø250mm
Grinding gear mod. max 14mm Ø700mm

OMP snc Panaro mechanical workshop
OMP snc is a company specialized in precision mechanical machining, capable of processing mechanical prototypes,
samples, small and medium series and low and high volume production runs.
Our company is ISO9001: 2015 certified and is an important and solid reality already operating for several years in
Emilia Romagna. OMP is capable of serving in different industries such as automotive, hydraulic, biomedical,
renewable energy, food, automation, etc.

The OMP is a contract manufacturing company located in Chieti -. Italy Our mission is to provide a competent and professional service during the machining and assembly. The schedule of delivering impeccable quality products is our goal. We measure success by the satisfaction of our customers.



Contract Manufacturing: Thanks experienced and motivated staff and the use of latest machines and our favorable location, we can offer an optimal price / performance ratio in international competition.



Subsequently, our range of services:

Large part machining: to our processing center we can process parts up to 8 meters in length

Milling: various CNC machining centers (BAZ)

Turning: CNC and traditional

Grinding: Flat and cylindrical grinding

Locksmith sector: we can in our locksmith you welded structures in steel, stainless steel or aluminum version with or without mech.Offer processing.

Installation: We install your prototypes or series and take over the entire execution of the bill of materials to the finished product.

Surface treatment: In the house we can wet painting open 5000 x 7500 x 5000, however, we can offer you all the usual thermal and surface treatments such as powder coating, anodizing, burnishing, electro polishing, mirror polishing, hardening, etc.



If you have any need, you can submit your request, we will make you an offer without obligation.

O.M.P. S.r.l. specializes in the processing and supply for third parties of mechanical components based on the customer's design. The company focuses mainly on the hydraulic, pneumatic, industrial agriculture, earthmoving, automotive, industrial automation and other niche sectors. In addition, O.M.P. S.r.l. is able to provide products already assembled, functionally tested and with certified final testing, ensuring compliance with the technical specifications of the individual component and functionality, to allow the product to be inserted directly into customer assembly lines, also from a Kanban perspective.

Precision mechanical workshop

Since its founding in 1978, the optical electric Huber GmbH (OEH GmbH) engaged in the manufacture of precision milling and turning parts. We produce and optimize for you sleeves, pins, screws, locking blocks, special hinges or even general turned parts.



Focuses on parts up to 32 mm in diameter or 22 mm edge length from the materials titanium, copper alloys, aluminum and precious and free-cutting steels.



In the optical industry, we work together with all well-known companies, more buyers come from the electrical engineering and from the general precision engineering industry.



In addition to the standard program for the eyewear industry also make products according to customer requirements and related services are offered.

As a production partner to Original Equipment Manufacturers for more than 50 years, Optiwa B.V. (Optiwa) supplies our customers with precision mechanical parts and mechanical assemblies. Optiwa's critical success factors lies in its efficiency, design for manufacturing (DFM) support and a highly efficient production of products to tolerances in the sub-micron range.

A team of skilled personnel ensures an uninterrupted production flow of products that meet specifications, quality and delivery commitments - time and time again.

Optiwa is your first choice partner for series production of very accurate and complicated products at the right cost.
Capabilities

* Range of state-of-the-art machining centres
* Turning and milling of very small parts to big parts up to 800mm
* Range of robotized machines for production 24/7 (minimum supervision and lower production cost)
* Sub-micron technology
* Precision mechanical assemblies (vacuum cleaned, where necessary)
* Series production up to thousands per annum
* Controlled environment measuring department
* Excellent supply base of surface and thermal treatment services
* Design for manufacturing (DFM) support

Family business with over 30 - year tradition
We manufacture the following tools:
Toolmaking
-Follow-on composite tools
Punching tools
Molding tools

Forging and machining of forgings

Öschger precision turning and milling specializing in the manufacture of sophisticated components and customized especially for medical equipment, measurement and control technology and mechanical engineering.

Our trained and experienced team guarantees high flexibility, short development times and customer-oriented cooperation.

We offer a very high production depth in small and medium series with a variety of processing steps on CNC-controlled machine tools from renowned manufacturers.

This allows the optimum processing difficult materials especially stainless and acid resistant steels and special alloys.

Our company is in accordance with the Euro standards EN ISO 9001 / 12.2000 and according to the medical standards EN ISO 13485:2003 + AC: 2007 certified.

Production spectrum

We handle all stainless and acid-resistant materials, titanium, aluminum and all other machinable materials:

Rotate:

a diameter of 5 mm to 200 mm.

Turning lengths up to 800 mm

Prototypes, individual parts manufacturing to mass production

Our machines are equipped with driven tools so that a cylinder surface (settlement of
rotated diameter) or on the end face machining is possible.
CAM supported programming using Surfcam with several direct interfaces to other CAD programs such as Catia,
Pro E, AutoCAD, etc.

Milling:

Milled parts of dimensions 5mm up to a size of 600mm.

* Up to 5-axis simultaneous milling,
Position * 5-axis,
* 3D - free-form surface machining,
* High Speed Cutting, IMC-40bar,
* 3D-Probe System

Cylindrical grinding:

Loops outside: up to a diameter of 300 mm and a length up to 1000 mm.

Loops inside: from a diameter of 4 mm to 150 mm and a length up to 200 mm.

With these high-precision manufacturing techniques contours in many engineering materials are easily implemented.

The dressing of the required grinding wheels is performed with moving diamonds.
The result is a complicated profile shapes in huge perfection.

Our products

Manufacture its own tooling systems:

Through our many years of experience in machining processes, we are now able to produce driven tools as well as special solutions in the tool area of the highest precision.

We manufacture "tools by the user for the user"

Highest precision and quality!

The osp präzisionsteile GmbH is a powerful company in the field of machining technology. With modern CNC machines we manufacture for leading companies from different industry segments: mechanical engineering, automotive, aviation and aerospace industry, measurement and control technology, medical technology, the specialized glass construction.


40 years successfully in the market!


Decades of experience with highly accurate precision components qualify us as a reliable and competent partner for industry.

CNC turning and CNC milling
5-axis machining / 3D - Models
Conventional turning and milling
Round and flat grinding
Prototype and tool
Complete assemblies
Parts and spare parts production
Small, medium and large series
Weldments
Wire and die-sinking EDM
3D metrology
CAD / CAM - Cimatron

Power spectrum

We manufacture precision parts for the most various industries: machine building, the automotive industry, motor sports, aviation and aerospace industry, measurement and control technology, medical technology and the specialized glass construction.

Our product range includes:

Equipment and devices
Machinery and plant components
Prototypes
Items in small, medium and large series
Assemblies
Glass fixing systems

The

Osthoff precision mechanics deals with the production of mechanical components made of ferrous and non-ferrous metals including hot or surface treatment.

With modern machinery we can process in one setting when producing complex qubischen and rotationally symmetrical components five or more pages. The advantages are shorter lead times, precise positional tolerances, no re-clamping and a better quality / price ratio.

1980 Company founded by toolmaker and master mechanic Horst Osthoff.
Repair and rebuilding of HSS and solid carbide special tools.
Parallel conventional production of turned parts for the tool.
Mid-80s conversion of the machinery on ground-controlled machine tools, CNC milling and manufacturing focus.

1986 Development of a universal multi-position measuring system, in particular for use in rotationally symmetrical parts.
This measuring system is trademark protected.

1995 Development of a device for the removal of Abstechbutzen of turned parts, with subsequent patenting in Germany and in the USA.
Since then, complete machining of mechanical components made of ferrous and non-ferrous metals, including hot and surface treatment.
Primarily production of small series with numbers from 5 to 200 pieces, but also series of up to several 100 parts.

2001 Introduction of a quality management system certification, the company according to DIN EN ISO 9001/2008.

The customer base is located in the mechanical and automotive engineering.

Own developments:
* Butzenentferner
* Universal multi-point measurement technology

The name Bihler guarantees for more than five decades for the highest quality. The same high standards (DIN EN ISO 9001:2001), which we place in the production of Bihler machine parts of the day are, of course, also in contract manufacturing. Here we offer you everything from a single source - from the design to the procurement of materials, the manufacture of precision parts (turning, milling, grinding, etc.) and fully assembled modules, the post-and surface treatment of workpieces up to on-time delivery.