Do you have components with a length or diameter of 1200 millimeters and a mass of three tons? No problem, we process workpieces up to 1000 x 1200 x 800 millimeters (width x height or diameter x depth) and a mass of up to three thousand kilograms on our CNC-controlled manufacturing machines.

Our high-quality machinery allows complex components to be manufactured with the highest precision, even with unusual dimensions. It doesn't matter whether they are rotationally symmetrical turned parts or cubic workpieces.

In both cases, the highest level of reproducibility and accuracy is guaranteed. For machining, we rely on ultra-modern and sturdy machining centers made in Germany; experts will be familiar with the Alzmetall brand.

The outstanding features of five-axis simultaneous operation make these manufacturing centers guarantee unmistakable quality and speed. In doing so, we not only machine simple structural steels, but also materials that are sometimes feared because they are difficult to process.

The following is a selection of the materials we process

General structural steels
chromium-nickel steels
duplex steels
Highly heat-resistant and high-alloyed steels

High-strength aluminum
Inconel (600,625,718,601.725, X-750)
All plastics
Titanium (pure titanium, Ti6Al4V, Ti6Al4V ELI, Ti6Al7Nb, Ti3Al2.5V)

Murtfeldt Plastics GmbH & Co. KG



Murtfeldt Plastics is headquartered in Dortmund, Germany, is a steadily growing company. Murtfeldt manufactures machine parts for the drive and conveyor technology from highly wear-resistant sliding plastics. Customer focus and service orientation are considered very important. These are guaranteed by subsidiaries and a network of contractors.



From four employees in 1954 Murtfeldt is now grown to approximately 200 employees. Murtfeldt has approximately 16,000 m² of production and warehouse space and a product and service range, which is one of the widest on the market. Machinery parts and shapes according to customer drawings - even with the smallest numbers - inexpensive to produce, already counted in the 1970's to the Murtfeldt strengths. The wide standard range of chain guides, belt guides and slide profiles and the fully automated, maintenance-free chains and belt tensioners are world-renowned.



Precast expertise firsthand.



Offers a special service, the Dortmund company designers and users. The Dortmund are specialists for plastic with particularly good sliding and wear properties and manufacture individual parts and series depending on the customer. Is of particular importance within the house of the Application Engineering Department. This engineering department is available to all customers. The Murtfeldt engineers can advise you on the subject of plastic, give tips for editing, to create tolerances or in cooperation with customers all plastic construction.

The company Murtfeldt
Your reliable partner for industrial plastics
We specialise in technical solutions and products made from a diverse range of plastics. Our customers benefit from our extensive choice of manufacturing processes. They come from industry, have technical setups and want to find the best solutions for their requirements.
What we can guarantee you: As our customer, you will receive the best possible solution, precisely tailored to your needs. To do this, we draw on expertise that we have built up over several decades – knowledge that covers a wealth of engineering plastics and their professional processing. Many of our customers have been working closely with us over decades to develop and produce their solutions. Our application consulting service forms the basis for the manufacturing and machining of engineering and high-performance plastics. We can also offer you hybrid solutions, if the task at hand requires it, thanks to our subsidiaries who have been building up their expertise in the field of additive manufacturing and fibre-reinforced plastics for many years. Our consulting service is available to you but it’s your decision to whether you want to use it. Our customers include a number of leading suppliers active in machine construction, drive technology, pharmaceutical and medical technology, beverage filling and food processing, the packaging industry, aviation, the automotive industry, and environmental technology.

Metalworking

As a supplier of medium and large companies in the metal industry, we enjoy a good reputation through accurate and timely implementation of specifications. We manufacture products of the highest precision with our modern machinery in small or large series of bespoke or as a system solution: turning, milling, drilling, bending, welding, plasma and oxyfuel cutting, fixture, special designs.

Save money!

Save money in the awarding of contracts to sheltered workshops according to § 71 SGB IX

Companies employing more than 20 workers are required to pay a compensatory levy in the event that they do not employ recognized severe disabilities in their operation. The employment rate for these companies is 5%, ie every 20th Employee is to be a recognized severe disabilities. The countervailing charge is for any unused space requirement depending on the level up to € 3,068 per year.

In addition to the employment of severely disabled approved, you can get rid of the payment of such compensation levy by the fact that you subcontracted approved workshops for disabled people. In this case, you can deduct 50% of the invoice amount that relates to the job performance of people with disabilities, on your levy.

An example:

You place it in a recognized workshop for disabled people a job with an invoice amount of € 2.000, -. The labor cost per unit of this contract is € 1.500, -. Of these, € 1.500, - You can deduct 50% of the countervailing charge, so you € 750 - can be saved.


Processing options:

CNC-Dreh/Fräsbearbeitung area:
1) Mazak QT Nexus MS 250, launched in 2008, driven event center, counter spindle
Turning diameter chuck parts: 10 - 300 mm
Turning diameter rod: 10 - 70 mm
Turning length: max.450mm
2) Mazak SQT 100 MY + Iemca bar loader, launched in 2001, Y-axis, Iemca-bar loader
Turning diameter rod: 4 - 40mm of rod
Y-axis: +-40mm
Turning length: max 300mm
3) Mazak SQT 200 M, launched in 2001, driven WKZ, LNS bar feeders
Turning diameter chuck parts: 15 - 200 mm
Turning diameter rod: 5 - 50 mm
Turning length: max. 500 mm

CNC-Fräsen/Bohren/Gewinde:
1) Mazak VTC 20B, launched in 1998, 24 WKZ, IKZ
Machining Dimensions: max. 500x500x1100 mm
2) Fadal VMC 1500 XS, launched in 1998, 20 WKZ
Machining Dimensions: max. 400x400x700 mm
3) Deckel FP4, launched in 1989
Machining Dimensions: max. 400x300x600 mm

Automatic saws:
1) Bandsägeautomat MEP Shark 280 SXI, launched in 2001
Sawing flat: up to 300 mm width, 250 mm height
Circular saws: up to 250 mm diameter
Length up to 1500 mm single cut, infinitely short cuts from 6m length
2) circular saw Berg & Schmidt VKS 350, launched in 2001
Sawing Flat: 100 - 100 mm
Circular saws: up to 120 mm mild steel, max.80mm stainless steels
Length: up to 1000 mm single cut, infinitely short cuts from 6m length

These diverse standard machines such as drill presses, lathes etc.



Mürwiker workshops GmbH
Commercial building 4
24955 Harrislee
0461 770069
0461 7749107

The Japa GmbH was founded with a focus on CNC machines Installation / Commissioning and aluminum light crane system installation / distribution / handling devices of 2009.
Since the beginning of 2014, we are working hard on our new assembly lines, retrofit of Conventional / CNC machines and contract manufacturing conventional and CNC.

Special orders and design through us also part of our range.

We are a performance-oriented and modern supplier operating for prototyping, single part and small batch production. We specialize in the production of turned and milled parts.

You set high standards for quality, performance and timely delivery?

With innovative technology and know-how fachkompetentem we stand for reliability and exceptional quality execution of our orders.

It is individual customer service and careful, optimally tuned handling of orders as guiding principle. We take enough time in the job definition. You feel reliability from the first moment.

Production of turned and milled parts in the Czech Republic. We deliver inexpensive small and medium series thanks to collective transport. Quality assurance on site. Delivery time: 4-6 weeks
Active for the Swiss machine industry for 25 years, high quality standard.

M u T

We bring for you metal and technology together!


We combine our years of experience in the metal sector with production technologies in the STAMPING, PUNCHING NIBBLING, TURN, PULL, LASERS, FLAME CUTTING AND MACHINING. Incl. of all known surface systems.

Flexibility and high efficiency, we provide you with small and medium batch sizes.

We are pleased to be able to introduce our performance on the following pages.

We are available for a personal interview.

Please get in touch with us.

We supply products made of steel, stainless steel and non-ferrous metals.

• Stamped parts: 0.5 mm to 20 mm thickness
• drawing & bent parts: in all ductile qualities and strengths
• Laser Parts: St to 20 mm thick, VA to 15 mm thick, aluminum up to 10 mm
• Rotating parts: from the rod or rotational parts
• Cut Parts: up to 50mm thickness
• manufacturing technology combined components
• Modules: completed consisting of punching, turning and milling parts finished to your specifications in 1/1000 mm range
• Special profiles: in all ductile qualities and strengths
• Raised floor - accessories program for heavy load

The economic optimum production process depends on the needs, the required accuracy and, if necessary, by the requested delivery date.

Our customers come from:
• Construction Industry
• Heating Industry
• Agriculture
• Automotive industry
•

Our customers value us as a reliable and versatile partner. We are also happy to take on major challenges and support your project or production part with a great deal of know-how, as well as a high level of quality and cost awareness.

We provide you with precisely machined components in turned, milled or cut to size. On request, we carry out preliminary work such as chamfering, planing or deliver semi-finished products in the form of round bars, plates or tubes.

In addition to ready-to-install machined components, which we produce for you using all common manufacturing processes, we offer a wide range of semi-finished plastic products. If required, we deliver plates, rods and tubes* either ready to manufacture or with the desired pre-processing such as sawing, planing (up to 4 sides simultaneously), profiling, chamfering, etc. Thanks to our decades of experience, we are the right partner for almost every task in the plastics sector.

We are an ansa essiges in Manisa Turkey Company. We make with and without robot Automatiserung, series production with robots and CNC turning and Fraesteile in small and large series.
We also make steel construction and mechanical engineering including automation.
We have 1000sqm and 500sqm open Closed Area.