The master cast AG, founded in 1982
may certainly be described as a small operation with know-how.
The owner Charles Champion is a skilled cast shaper, with additional training
as a production planner.
Three to four long-time employees (all over 10 years), special help
To finished products.


The master cast AG is a small efficient company that can undergo due to its flexibility to customer demands and short deadlines. It is
Specialist for aluminum, sand and permanent mold casting.
According to customer requirements the cast also complete can be processed.

The Mercatur GmbH & Co KG is a trading company with shopping activities in the European and mainly Asian, chinsesichen room.

We have over 18 years experience of working with our Chinese partners and have a very good network.

We can therefore provide you with reliable and good quality as well as a clear price advantage and reasonable delivery times.

Many of our suppliers are certified to TS 16949 and ISO.

Since 2010, we have a private office, and a subsidiary in southern China, which performs quality inspections and supplier audits for us.

We can offer you the following products.

- Bearings
- Forgings
- Plastic-injection castings
- Feigussteile
- Grey-Niro-castings and special alloys
- Aluminum die castings
- Turned parts
- Stamping and bending parts
- Cold extruded parts and screws

according to your specific drawings and constructions.


We stand as your contact person from consulting quotation and order processing are available and have storage capacities in Asia and Germany.

Through close cooperation with our plants, we can take over our office in China to certain processes directly influence.
We also handle the processing of your imports and deliver free or Ex Work and bevoraten your parts in a safety stock.

In addition, (car Callback etc.) Our company has an advanced product liability insurance

It would be very pleased to convince you of our ability.

Metalic BISIPI Ltd. is leading Bulgarian company specialized in production of steel, iron, aluminium and brass castings. Our foundry is well known with its production all over the world, especially with the investment casting technology. Boasting more than 40 years of tradition, we guarantee a good acceptance of the production parts and equipments.

Production possibilities: We are able to produce both blank castings as well as fully-machined parts. Closing the production cycle gives us opportunity to supply complete finish product, starting from decisions on casting technology, making of tooling, casting, machining, etc. according even to the most specific customer’s requirements.

We are specialized in doing customized R&D of new products.

The metal foundry Oswald Mewes is a powerful company with many years experience in the light metal sector.


Competence and creativity are no foreign words for us -
Take advantage of our 'know-how' and a professional approach based on the latest technologies.

We manufacture since 1980, cast aluminum for a variety of industrial sectors and requirements, such as partition walls, awnings industry, food industry, electrical industry, mechanical engineering, etc.

Here, we cover a wide range of castings, sizes and weight classes.

We accompany our clients' projects from the design to the packaged final product - therefore, we also look back on a number of established satisfied customers.

Service, expert support and exchange of information on a partnership basis are for us a matter of course.

Thanks to modern machinery, we also offer all services in the field of CNC manufacturing.

Convince yourself by a dedicated team and our proven range.


We are happy to put your imagination to come up with the help of our modern manufacturing facilities, in a finished product.





- We can take your idea in the form of -

See to our webpages at:
www.Metallgiesserei-Stauss.de

In our medium with about 95 employees-size foundry we manufacture individual parts, small series and prototypes with an annual capacity of about 350 tons.

The extraordinarily flexible adjustment of the machine plants for hand and machine formed casting and the appropriate attitude of the staff allows us to respond to your demands on quality and delivery.

Data consistency of the offer to the mechanical machined and finished unit is just as natural as the certified quality assurance measures.

alloys:

The alloys listed below are processed regularly, but we can use to order even more alloys.

aluminum
G-AlSi6Cu4
G-AlSi9Cu3
G-AlSi 12
G-AlSi 12 (Cu)
G-AISi10Mg vv + dv (Fe 0.30)
G-AlSi7Mg (Fe to 0.10)
G-AlMg5
G-AlZn10Si8Mg
G-AlCu4Ti

magnesium
G-MgAl9Zn (AZ91HP)
G-MgAlZn (AM60)
ZE41
WE43

bronze
G-CuSn10 (GBZ10)

Brass
G-Cu Zn 15 Si 4 (Olkusi, Tombak)

zinc
G-ZnAl4Cu3 (Zamak Z430)

iron

For aluminum and magnesium alloys, we offer each heat treatment

For all kinds of metal casting, we are the right partner for you. Should your design be implemented as a cast in aluminum, so we set it for you at a small series to mass production.

Our strength lies in the extension of the casting limits. Experience in solving problems qualifies us for more challenges. Our partners are the traditional mechanical engineering as well as well-known companies in the automotive sector: aluminum prototypes speak in wall thicknesses from 1 mm for themselves.

h1> We imagine /h1>
h2> Technical precision, dedicated service /h2>
Two companies - an achievement!

The market orientation is part of the corporate policy at Schiefelbusch.
We are already ahead in the design with extensive know-how
available.

In order for the final product to the customer's equivalent in all respects,
is the correct choice of materials and casting methods in addition to the design
priority.
Close collaboration between the designer and foundry thereby assure long-term success.


• We are competent partners.
• We support you in the development.
• We bring experience and know-how.
• We have the right solution for your applications.
• We produce the highest quality.
• We are flexible!




h2> Keeping up to date /h2>
The metal casting Schiefelbusch GmbH is a specialist company for metal casting in all its facets.

Every day we offer our clients professionally competent and reliable execution of all work, a high level of service. Born and lived this concept is one of our over 200 dedicated and motivated employees at both plants.

National and Foreign companies confirm that they have considerable advantages to working from the idea or existing projects:

REDUCE costs - stock - time delivery and time to market
REDUCE number suppliers and supply chain costs
IMPROVE quality and service
SOLVE purchases and technical problems
HAVE single integrated supplier for products / services
OPTIMIZE and simplify products / services
CODESIGN - evaluation and design / technical support
PARTNERSHIP / ADVANTAGES in purchasing management for mergers with models in production for years
INCREASE market competition

Contact us for analysis, evaluation, proposals for your needs for:

Cast aluminum and bronze on earth - sand resin
Cast gray iron and ductile worked and treated
mechanical processing
Prototypes in aluminum and bronze

From prototype to series with existing models / ca or ns. construction

Services
Details on request:

• Worked mechanically
• Treaties thermally - superficially - painted and assembled

Engineering
Design, co-design and support projects
Support materials and technologies
concept development, product design and process
Design and construction models / molds and prototypes

Establishments certified and qualified in the province of Bergamo, Brescia, Vicenza and with over 40 years of market presence.
Always up over the years we have continually invested in human / technological resources to offer its customers maximum cooperation, competitiveness, quality ', support and benefits.
We have to manufacture prototypes, small, medium, and large series:

automatic green sand molding facilities
brackets dimensions mm. 650x800 and 700x800 with casting robots

systems mechanized sand molding
various measures sized stirrups up mm. 1440x1300 and 1600x650

manual green sand molding and resin sand
various measures sized stirrups up mm. 3500x3500 and 4350x2100

The stages of production processes / controls were held in factories, ensuring quality and timeliness.
They make quality control and mechanical testing (quantometer, durometer, tracking, traction, leak testing and X-ray fluoroscopy).

In factories in the province of Bergamo and Vicenza are made starting from the idea, design or prototype and design details project in standard materials, special methods of casting or billet.