In 1949 the company started under the name of MAS as a rental station for equipment, the repair and instant reduction of Landmaschinen.1962-1983 The MAS strengthened its good position even further and took over plus overhaul LKW.1983-1991 The repair was adjusted , Similarly, a production line for packaging machines was built. From 1990, under the name Namag GmbH.1992 Acquisition by Dechamps group and under a new name in 1994 in engineering and Formkastenbau active. By purchasing the field of activity extended also to hydraulic components. The sister company Bucher Hydraulics (formerly Oelhydraulik Altenerding near Munich) sold its shares in 2013, so that the NAMAC Maschinenbau GmbH & Co. KG from then on, there is an independent company in the market.

We have been creating production lines since 1952 working on bitumen and waterproofing membranes. We have also been producing turned and machined parts as per drawing specification since our early beginnings.

We are a bespoke Mechanical Engineering at your service. We customize our work with your business, to match your drawings and other requirements. We select the best way to achieve the mechanical parts that customers commission.
The company manages the production cycle efficiently, regardless of the amount of pieces it needs to produce.
Attention to detail is one of our secrets and we manufacture pieces that will be part of mechanical units and will be integrated into the assembly to exact specification.

Over fifty years of presence on the market have allowed us to build a solid background of experience, complemented by the continuous desire to improve our services, and offer a valid partner.

Our Products: Naturally good.

What make the nature, is a marvel.
It produces perfection in every detail - timeless beauty, impressive refinement and sophisticated functionality - and churning.
We of NC technology have made us this principle to the principle. With success. Due to the ever-growing demands, we have developed into a well-known provider of simple to highly complex machined parts.
Many of our tasks come from highly-sensitive sectors (medical, military,
Sensor technology, etc.). Through a widespread awareness of quality we achieve an above-average customer satisfaction.
We achieve the high quality goals by an experienced team of qualified staff in conjunction with a progressive and modern machinery.
Our offer for you ranging from raw material purchasing to the surface treatment to assembly production.This bandwidth has in the many years of our existence
Customers from all sectors convinced.
Fast. Innovative. Dependable.
We look forward to meeting you.

We pay attention to the finer points.
Not only during milling.

The delicate manufacturing in the milling requires maximum precision, not only in the production phase, but far beyond.
All job steps must be coordinated with each other efficiently - from inquiry to delivery.
Complex individual parts, small series, series and sample parts are manufactured in almost all materials (eg, titanium, aluminum, copper, industrial plastic, brass, cast iron, steel, etc.).
The devices for processing customer parts we design and manufacture completely in our house. This is always done in close cooperation with our customers, as their specific requirements and our solutions are inextricably linked.
The requirements of our customers, we solve with innovative technology, know-how and a high level of commitment.
Not only our equipment up to the machinery meets the highest demands. Our employees also take part in regular training and further education and are therefore always up to date

We you have the right machine an order..

Size, diversity and modern equipment of our machinery to ensure that NC art for many years meets the highest customer demands. Quality, accuracy and timeliness are guaranteed for each production size and any scale of production - from single pieces, small series and assemblies up to series production.

screw turned parts, cnc - turning, single spindel, multi spindle, escomatic, rotary table machines, assembly
diameter 0.5-60 mm, in all materials

We manufacture various plastic components individually according to your wishes and requirements, as well as support you with our know-how in the planning and implementation of your project. With our various processing methods, we have the possibility to carry out the entire component processing.
Alternatively, we will be glad to assist you in subsequent work such as contour adjustments or deburring of existing components.

As a medium-sized company, we are always striving to train our professionals themselves and to integrate them into our company.
Thus we have a large number of qualified specialists in all disciplines who meet our high quality standards.

Through our corporate structure, we are able to flexibly and quickly respond to customer needs and implement them.

The New Hauser Group is the holding company of the 26 currently single company with 2,195 employees and an annual turnover of 450 million euros in 2008.

The activities of each company can be found in the following business areas again

Textile
• batching
• centerwind
• traveling cleaner
• Transport systems (cheeses, roving bobbins, spinning cans)
• suction and vacuum systems
• coating and dry locations (use behind Web and knitting machines)
• storage systems for bobbins
• Palletiersysteme

Contract production, such as
• Rotating parts (pistons, bushings, washers, rings, cones, control piston, shaft, axles, hubs, pins, screws, spindles, pins, cylindrical rollers, rollers verch. Sizes, etc.)
• Milled Parts
• complete machine and plant construction according to customer requirements from design to
Installation and Service
• roller production (up to 8000 mm total length)
• Locksmith
• Wage measurement (modern measuring room includingPortal meter Zeiss MMZ G-25 30 20)

Commercial Vehicles
• Production of portal elements
• Profile editing
• Installation
• Coating

-Machine Elements
• Expanding shafts
• Clamping Couplings
• chucks and adapters
• friction and blade shafts
• Shaft handling

-Kompressorenbau (shipping)
• Start air compressors
• pressure vessel
• Industrial Compressors
• compressed air starter
• Air-conditioning
• bilge oily water separator
• Biological treatment plants

Environmental engineering
�� Screw mills, up to 120 m³ / h
• starscreens
• Shovel separators
• air classifier

Products for the steel industry
• Band edge processing facilities
• rolling mills
��� conveyor systems


A growing product range and increasing demands of customers from individual divisions make a steady and adequate investment readiness required for a stable and healthy growth of the company can be secured for the future.

A particular interest is that in the group a technology-and innovation-friendly climate is to be promoted in the unconventional thinking and new ideas

The company Neumann + Hoffmann has worked as a subcontractor and supplier for many global enterprises from various parts of the plant and machinery.
The turning of parts from Ø 6-Ø700mm, as well as the milling and assembly of components primarily in the materials stainless steel and aluminum is our home. Our measurement capabilities guarantee process reliability.

New in our production program is the double-lid-lock system in five different sizes, which we can offer as a separate product. More information on these, please refer to our website.

In the present time are customer orientation, quality, timelines and an appropriate price-performance ratio for a successful business.
These criteria are based on over 30 years of experience at the highest level of competence and motivation of our employees.
Modern machines, permanent process optimization and our highly trained staff ensure a friction-free production process.

You can rely on the team of the Neumann + Hoffmann GbR.

We can

Turning
· Small parts from Ø 6mm
· Large parts up to Ø 700mm
on modern CNC machines, some with driven tools
· All materials
include aluminum, plastics, non-ferrous metals and
high-grade stainless steels

Milling
· On machining centers with
B-axis (rotary table) to traverse 800x630x630mm
· 3-axis machining center with 560x1100x600mm traverse

Heat treatment and surface engineering
· Harden and reward, also of special materials
· Functional and decorative surface treatments such as anodising, DURNI-coatieren
ualia in collaboration with long-term partners

3-D metrology
· Measure of production parts for process safety
· Creation of first article inspection reports and test records
· Wage measurement
· Travels X1000 Y1200 Z900

Component Assembly
· Installation of manufactured or-supplied parts with us to complete units
· Testing according to customer specifications with test report


R apid T ransfer S ystems

α - β double-lid-lock system


Application:

The RTS lock serves the contamination-free loading and unloading of isolators, mini-environments, glove or glove boxes, barrier - or containment - systems.
This system consists essentially of two parts:
the α-and the β-port port
The α-port, the transfer port and is fitted in a dimensionally stable wall of the device. The self-contained β-port houses the einzuschleusende material or

Family-owned company with own toolfabrication and own production.