PEINER Forming GmbH is a subsidiary of Indian Sundram Fasteners Limited (SFL).

As a sales organization TVS Peine Services GmbH, we can offer all of our products internationally oriented production.
Currently part of Sundram Fasteners Ltd.. eight manufacturing facilities in India, as well as subsidiaries in Germany (PEINER Forming GmbH in Peine and WindBolt GmbH in Hohenstein), the UK and China.

When PEINER Forming GmbH screws, nuts and other high-quality, sophisticated, fastening systems and custom components (special parts) with nearly 100 years of experience produced in the size ranges from M12 to M72 in the areas of steel construction, mechanical engineering, wind turbines and the automotive industry (trucks and cars) .

In the special parts range we see our strengths, particularly in Kaltumformbereich with subsequent machining, because our clients a material and cost advantage can therefore offer compared to conventional twisted parts.

Through our following production possibilities (hot forming and cold forming), we are able to offer our customers Small amounts (prototype or spare parts requirements) as well as medium and large quantity requirements:

• Cold extrusion
• Hot pressing (Gas or Induction Heating)
• CNC machining
• Rotate
• Grinding
• Milling
• Drilling
• Calibrate
• Reduce
• Reward
• Sandblasting
• threading
• Final rolls up to 12.9
• internal thread machining
• External thread processing
• Surface coating according to customer

The following products we can offer you thus:

• Double ends
• Threaded rod
• Hollow forged parts
• ball pivot
• The wheel bolts
• Studs
• countersunk screws
• Welding screws
• securing screws
• 12 kt. Screw
• 6 kt. Screw
• 4 kt. Screw
• cylinder screws
• 6 kt. Nuts
• mother similar parts

In addition, we can offer you the following laboratory and labor services:

• Material analysis by spectrometry
• Tensile test (DIN EN ISO 6892-1, DIN EN ISO 898-1, DIN EN 20898-1)
• Impact test (DIN EN 10045, DIN ISO 148 DIN 50115thDIN EN ISO 898-1)
• Metallography / structure analysis
• Rauheitsgraduntersuchungen according to EN 50602
• Hardness test (DIN EN ISO 6506, DIN EN ISO 6507, DIN EN ISO 6508, DIN EN ISO 898-1)
• Corrosion testing (salt spray test EN ISO 9227), Kersternichtest after
DIN EN ISO 6988, DIN 50018)
• coefficient of friction / screws test of connectors (DIN 1800-7,
DIN EN ISO 16047, DIN EN 14399, M12 - M48)
• size checks
• Surface roughness
• Wage tempering
• Wage coating (eg zinc phosphating)

Special machines, jigs and fixtures



PEM building construction accordingly and make operational. There are designed and manufactured the necessary data for machinery and equipment controls.

So PEM combines design, engineering and control technology under one roof.



Installation and maintenance



PEM mounted in its own assembly center machines and equipment in the customer order. Light crane height of up to 10.5 m and 2 pieces 50 t cranes and more than 3,200 m² mounting surface are available.

PEM performs inspections, maintenance, inspections and repairs Experts gem. DIN from 31051. PEM accepts machine installation and implementation, including connection, commissioning and acceptance. PEM produces machines to predetermined performance measures as possible to restore (retrofitting), especially for used
Tool or printing presses.



Machining



PEM performs with modern processing centers in-house and contract manufacturing CNC milling, drilling and surface grinding to a part weight of 25 t.

Performance Industrial Services & Personnel Management GmbH is a relatively young company, but with 20 experienced employees and one location in Fussen.

The main fields of activity are the services in the technical and human resources.

Specifically, we offer the following activities:

1 Maintenance of machinery and equipment;

2 Overhaul and modernization of machines cutting and non-cutting processing;

3 Service Partnership: specifically for manufacturers of machine tools, we assume
commissioning and service activities;

4Relocation of complex systems, including project management.
Especially with the outsourcing projects, we can offer you in addition to the technical
Offer implementation and support in human resources.

All on our activities are carried out with great care and
accurately documented.

5 Metalworking:
CNC Milling: 500 mm X / Y 400 mm, Z 400 mm
CNC Turning: Z 1390 mm, X 305 mm
Surface grinding: 500mm X / Z 200mm / 400mm Y
Surface grinding: X 1000mm / 250mm Z / Y 500mm

Since we are working in a network with other companies in the industry, we can
still offer a wider range of metalworking.

6 Personnel Management:

- Testing and development of the potential of employees
- Advice and assistance in Neuqualifikationen of employees and managers
- As desired using selection tools

HISTORY
The craft business, founded in 1961 by Mr. Johannes Richter Senior, has been successfully continued and expanded by Mr. Peter Richter to this day.
Our company has been located in the GADA / Bergkirchen industrial estate since 2009.
In 2013 we were able to name Mr. Stefan Frank alongside Mr. Peter Richter as managing director.

OPPORTUNITIES
With our modern machinery and corresponding know-how, we can deal individually with all tasks.

TRAINING OPERATION
As a conscientious training company, we are committed to providing information events and offers on site, future-oriented and with social responsibility.

EMPLOYEE
All of our employees were trained and taken on within our company.
In addition, further education and training are carried out.

Our family is in the 4th Generation and has 2 legs. Technical marine equipment and sheet metal processing. Due to the marine equipment we are used to respond flexibly and quickly.

Our manufacturing capabilities are:
- Punches up to 80t
- Tieftiehen up to 100t
- Lasers (ST to 25mm; VA to 12 mm, aluminum up to 8 mm)
- Edge-
- Welding
- Roberterschweißen - (Rice Roborics)
- Own tool
- Solder
- Rivets
- Trowalieren
- Degreasing

CNC contract manufacturing, welding assemblies, individual parts, serial parts

ORGANIZATION PLACE: GERMANY- Order logistics and deliveries through our own group transports up to twice a month. Goods are delivered with a German invoice, without further or hidden costs.
PRODUCTION LOCATION- Bosnia and Herzegovina, EX-YU Läder
MANY POSSIBILITIES- We combine our own production with our subcontractors' capacities in a pure source. Parts are carefully checked and only then delivered!
STORAGE- In Germany (75417 Mühlacker) we can store any batches in advance, check them again and deliver at short notice!
EXPERIENCE- Long-standing (over 20 years) experienced employees in various manufacturing processes. We have been delivering to our German customers for over 5 years.
RESPONSIBILITY- Goods we deliver are insured, but we always accept sensible complaints and find a solution that suits everyone! Over 30 companies in Germany procure goods from us.
POSITIVE THOUGHTS - our customers are slowly becoming our personal friends! Working with friends is fun, security and trust.

* Precision
* Reliable
* Flexible
* Thoughtfully


Our strengths include the production of high precision parts for the chemical, aerospace and nuclear power plants.
In these areas, we are mainly dealing with valves in GGG or stainless for various applications.
The machining of stainless steel, we 1.4301, 1.4305, 1.4435, 1.4571 is no problem with our experience. Let us convince you of our efficiency and our Now how.
Difficult to machine materials such as eg Hard Alloy, Hastelloy, Incoloy of us will also be treated as normal steels such as St52, CK45, 34CrNiMo, 14NiCr14 and what is still everything to heard so.

Surface grinding Us cylindrical grinding is done internally also with us. Thus we are very flexible and can keep the lead times low.


To our customers we offer ready-made parts or assemblies and take responsibility for any operations Away.


Examples of our capabilities:

* Crankshaft
* Stainless steel valves (for space missions Technical Ariane Space)
* Couplings
* Zyllinder
* Rotary valve parts and machining
* Heavy duty
* Sensor Technology
* Precision mechanics
* Magnet Technology
* Fixtures and grinding work
* Door Automation

Our company offers precision engineering and more from one source.

On a modern, computer-aided machine tools we mill prototypes, individual parts and series parts. Using the latest machining centers we work with high precision milled parts up to 5 pages in one setting. This complex machined parts can be manufactured economically. The NC programs are prepared for programming on workstations. We can easily your drawing dxf data in formats dwg, step, igs, vda, sat assume.

Materials and work area
We process the materials of aluminum, iron, cast iron, steel, titanium, brass and plastic
The maximum working range of our machines is 500x500x400 mm

Program of delivery
Ready for renowned customers from different industries and we edit:
Bearing, housing, plates, linear units, assembly units, handling units, grippers, guides, levers, bars, distances, angles, baking, clasps, frames, covers, holders, body, castings, profiles

Assemblies
Complete assemblies and devices are manufactured by us ready for installation including the given surface treatment and fitted.Our own tool enables the production of stamped and bent parts
in small and medium-sized batches.

Through our wide range of possibilities for cutting and non-cutting processing results in a wide range of activities.

Our services are completed by:
Surface treatments such as Trowalieren, polishing, grinding and sandblasting
Surface coatings such as anodizing, chromating, burnishing, nickel plating, etc.
Heat treatment processes such as carburizing, nitriding, inductive hardening.

Proven Quality
All products are subject to during production and before delivery to continuous quality control by our qualified staff to meet our demand for a zero-defect production.

The PHOENIX tooling GmbH is high vacuum technology as a service-providing tool and mold as well as manufacturers of precision parts, assemblies, special machines and
Equipment supplier to the national auto industry, medicine and household appliances, machine and plant construction, as well as steadily growing, and the solar and solar industry.

The AEC Group is an automotive and industrial suppliers of roller bearings and components.
Through our passion for technology and the very high level of vertical AEC stands for highest quality.
The problems of tomorrow we broach together with you by our high level of innovation
and dynamics today.

It was founded in 1973 by 5 dedicated engineers.
Meanwhile, our main factory is a corporation, the technology as a basis for our
Do has to this day. The product range spans of ball bearings and roller bearings
Needle roller bearings and plain bearings up to special solutions. Here is our customer and his application for
always at the center.

The German sales company was in 2017 in collaboration with the family Schlembach
founded. Herewith we have already more than 50 years of industry expertise in Germany and
that, with the Schweinfurt location in the heart of the rolling bearing industry.

Polygon grinding, form grinding, round and non-circular grinding