We work with the biggest Italian and international groups in many different sectors and markets and our strengths are the flexibility and dynamism that allowed us to reach in few years a level of exponential growth to which we can add a notable rate of customer satisfaction.
We are convinced that thanks to our own flexible and dynamic way of relating to the market, and to our customers, we can face the difficult and typical challenges of the new global economy.
Our machine fleet is continually updated paying attention to new technologies, which enable us to go further to optimize the range of our production and allow us to deliver the finished product including the necessary certifications.
We hope to start with you as soon as possible an interesting collaboration and to add you to our best customers.
For any other information or doubt we stay at your complete disposal and wait for your request for quotation.

"Precise for you."

With this quality requirement, we welcome you in the world of SERA Metallbautechnik. We not only commit ourselves to the highest precision in the production - our focus is on your unrestricted satisfaction.

Founding of the company 2002
First commercial premises in Lovrenc na Dravskem polje
Experiences mean the future
We work with 15 years of experience and are constantly investing in new technologies.

We manufacture high-quality and sophisticated machine parts and offer a complete service.

We are your competent partner in fluid technology with four locations in and outside Germany

- CNC long and short turned parts
- Vertical turning
- Assembly of final-tested mechanical components
- grinding (inside, outside, in the passage etc.)
- honing
- milling
- sandblasting
- hard machining



Complete machining on modern CNC machines (long and short turned parts, vertical turning)

- complex workpieces (from rd3 mm to rd300 mm, vertical turning up to rd150mm) can be produced in batches from 1000 to 100,000 pieces

- All steels, case-hardened and highly tempered nitriding steels, stainless steels, non-ferrous metals as well as extruded, sintered and forged blanks can be machined.



Our precisely machined and accurately controlled individual parts are assembled with the supplied, controlled external parts and then tested.
The end result is tested and perfectly functioning assemblies directly to the customer's assembly line.

Since 1984, the company socrima specializes in manufacturing custom parts and customer specifications.

Socrima provides optimized, reliable and responsive solutions for your machining small and medium series of parts in all materials and in a wide range of dimensions.

Socrima can meet your needs:

Traditional turning,
CNC Lathe
CNC milling,
CNC turning,
CNC Machining Center,
CNC punching,
CNC bending,
Silver solder,
Solder,
Plating localized "buffer" buffer tinning, silver pad.
Socrima supports operations related to machining, surface treatment (plating, tin plating, nickel plating, epoxy paint, etc ..., annealing heat treatment, etc ...).

Socrima supports the assembly of subassemblies from machined by us and / or provided by you parts.

Since 1984 Socrima works for the electromechanical sector, it manufactures custom parts and customer specification for the transport and distribution of electrical energy average low and high voltage.

SPANPOWER CNC Precision Parts is the manufacturing specialist for high-quality CNC-manufactured components and assemblies. With our modern machinery, we produce prototypes and series.

Our services include CNC turning and milling and wire EDM. Customer-specific surface treatments and module assembly round off our manufacturing options.

Our customers come from the fields of plant engineering, mechanical engineering, optics, automotive and aerospace.

SPR GmbH is a service provider for the production of turned and milled parts and your reliable contract manufacturer!

The strengths of our production lie in the production of individual parts and small series.

Regardless of whether it's turning, milling or turn-milling combinations, our machinery allows us to be very flexible for you.

The maximum travel distances for milling are 1,100 x 600mm and with 5-axis simultaneous machining, we can process workpieces of up to 1.2 tons.

On our lathes, we can produce chuck parts from the smallest diameters up to Ø800 mm.

Shafts up to Ø500 mm and a length of 2000 mm can be produced.

We have had our quality standards certified in accordance with ISO 9001:2015 with our QM system!

I am Kornél Ledniczki, managing director and co-owner of Stahl CNC Hungary Kft. Karl Stahl and I founded the company in 2015. I worked for him in Germany until 2015, and that's how the idea came up to set up a joint company in Hungary. Since then, we have already found many satisfied Hungarian, German, Austrian and Belgian partners. Once we have met our deadlines, we can meet our deadlines almost 100%, and the components we produce must not only be good, but also beautiful.

The Stahlwasserbau Beeskow GmbH is a regional leader in the fields of steel hydraulic, materials handling, industrial and commercial service.

We offer our customers complete solutions from a single source - engineering, production, installation, maintenance, service and repair. Here are excellent quality and flexibility to the company's strengths.

Achieving total customer satisfaction, but we work with our more than 80 employees every day.

In 2015 we won the Innovation Award of the State of Brandenburg and have been awarded in 2016 as a finalist at the Grand Prix of the middle class, which we are very proud.

Since 2004, our company has been providing cutting-edge services in the field of CNC machining of metals and plastics. Our production hall, which covers an area of 2340 m², is equipped with the latest technologies that ensure efficient fulfillment of all quality requirements for our products. Our professional services are sought after by both domestic and foreign companies from various industries. We invest tens of percent of our annual profits in the modernization of our technologies and in the further training of our employees. We currently employ 45 employees whose expertise and skills enable us to make the most of our technical and mechanical equipment. We are characterized by exceptional workmanship, a personal approach to each customer and a wealth of references from many industries.

We specialize in CNC machining, from piece production to high-volume production, and offer part measurement with reporting on a Wenzel 3D gantry measuring machine. We also provide assembly of assemblies and perform surface finishing to customer specifications. Our versatile five-axis machining centers enable efficient complex milling. We utilize palletizing of five-axis and horizontal machines to maximize efficiency and setup speed in repetitive production. Through automation and priority machine control, we guarantee to meet deadlines for serial orders.

Our major customers include companies in the optical and medical device industry, high-speed doors, agricultural equipment and automotive industry.
Our company has implemented a quality management system in accordance with ČSN EN ISO 9001:2016, which guarantees the high quality of our products.

We are currently in the process of implementing the IATF 16949:2016 standard, which we expect to complete in mid-2025.

We can provide customers with a complete service, creating a collaborative dialogue that extends beyond the simple customer/supplier relationship, with the ability to satisfy any request and to create items from the design phase to the finished product.

Professionalism and competence are put at your service, with the support of new and latest generation machinery that guarantee the highest quality of the products.

SYS Pres company is metal fabrication company which spealizes in laser cutting, laser welding, welding, bending, and surface treatment operations. Surface treatments are automatic sand blasting, zinc plate, copper plate and etc. SYS Pres company's facility is 3000 sq. Our export countries are Austria, Germany, England, Netherlands, Belgium, Israel.

Modern technology + highly qualified personnel

We are a powerful and flexible partner for the production of turning, milling and Cleans parts in series production.
We manufacture to 2,800 m² technically sophisticated products with approximately 60 highly modern CNC machine tools from all Zerspanungsbereichen.

Quality assurance system
First-class quality has been in the production of AGA Machining GmbH priority.
The work processes in our company based on the value-adding processes.
These are fused together by the staff of manufacture within the meaning of the operator inspection and quality assurance.

Quality as the foundation
Quality is the basis of all activities at the AGA machining Gera GmbH.
Every employee has to make a significant contribution to quality.
The quality policy is the basis for work of every employee at AGA.

Quality in national competition
To prove the competitiveness of AGA obtaining the quality certificate 16949 stated goal of the company is TS.

NULL-defect quality
NULL-defect quality in all processes, products and services is essential to secure the future. To the total satisfaction of customers is our ultimate goal. This is achieved by error-free products and services, punctuality and by competent and friendly cooperation with our clients' staff. Continuous improvement means that every employee fully aware of the quality of his individual work as well as the active contribution to the continuous improvement of the quality of AGA processes - products and services.

Quality by thinking and acting
To achieve the quality objectives, the skills of all employees for customer and quality oriented thinking and action must be constantly developed and trained.

Quality through Leadership
The managers are an example for your employees.
They must formulate clear, achievable objectives and support the employees in the achievement of these goals.The managers are responsible for the fulfillment of these goals.

From design to finished product
Through years of experience as a supplier to the automotive industry, we offer our customers the complete production of their products.
We are partners with the pros and development and give you competent with technical know how, new manufacturing processes and over 100 qualified employees to the side.
The creation of individual concepts in the field of machining is one of our strengths.
We are your partner - already in the development phase.

We provide machining services of unit parts, prototypes and short-run production. Problem-solving and provision of suitable machining solutions are what we do best. Our customers trust us because we are flexible with their enquiries and requirements, we deliver on-time and offer short- delivery times. This is what makes us stand out from the rest.
The precision parts that we produced are known for its top quality, due to the raw materials used. Our experienced and passionate personnel carry a high sense of responsibility towards our customers and their product.
We continue our expansion and growth, especially in technological developments. Our precision components are manufactured according to customer drawings, specifications and international standards. Design and production by reverse engineering method is also provided as a service.
And finally, we offer competitive pricing, guaranteed!

High-precision devices, milled parts, small batches and injection-molded parts — these are our areas of expertise; we produce these products at our plant in Jennersdorf with the greatest care, to the highest quality and with irrepressible commitment for our customers from a wide range of industries. Accurate, timely, flexible and at attractive prices.

Since its inception in 1999 we have specialized in the manufacture of parts and series in the area of turning and milling, and are active throughout Europe.

Regular investment in new technologies and manufacturing capabilities ensure optimal quality and customer satisfaction.
Good Quality begins with a high-quality production equipment, efficient processes and a clear structure. Continuous development is the foundation of our success.

We employ 35 employees in administration, construction and manufacturing. Join our 4 trainees for precision mechanics and in administration.

The cooperation with TME is open, direct and uncomplicated.
Our clients include companies in the areas of:
Engineering, tooling, laser technology, and aerospace and automotive industries.

Service overview

Production / manufacture of components
We manufacture parts, spare parts and small series to mass production according to your drawings or a pattern. Our machining capabilities include CNC-controlled milling, drilling, turning, wire EDM, surface grinding and conventional crafts and sheet metal processing. We can use our processing centers, parts machining, up to the size:
L = about 2100, W= about 1000 B =, H = about 600 and up to a weight of 6500 lbs.

Construction
Design of tools, fixtures and equipment. 3D modeling for prototyping. Support for design tasks and advice on cost-effective and production-oriented manufacturing of your parts during development.

CAD / CAM
Acquisition and processing of all popular file formats such as : STEP, SAT, IGES, DWG and DXF programming with our
CAM system.

Welding / Heat treatment
The welding of steel and heat treatment (hardening, tempering and annealing) are also of parts of the scope of our processing.

Surface treatment
Surface treatments, we can perform at our partner companies.

Assembly
Assembly of parts, components, tools and equipment.

Reports
On request, we create initial sample inspection reports and test protocols.

Delivery
We deliver your products on time with shipping or parcel service.

We are a professional partner, trust TME!

Torneria OML is specialized in high precision CNC machining.
Since 1982 we have been specialized in the processing of any type of metal. Thanks to the use of the latest generation and highly technological machinery, we are able to guarantee the highest quality and precision, always offering an excellent quality / price ratio.
Our qualified and constantly updated staff is able to quickly manage any type of order, from small and medium-sized production to high-precision machining.
Thanks to the adoption of modern CNC technologies, we have considerably reduced production times, greatly increasing the reliability of the productions themselves. To always guarantee quality products, we have introduced systematic checks according to UNI and ISO 9001: 2015 and ISO 14001: 2015 regulations.
Our company is part of the ATI set up for participation in the project “Venetian mechanical manufacturers on behalf of third parties present themselves in Europe”, which will be implemented using the POR Veneto region funding, part of the ERDF.
Thanks to the use of the latest generation and highly technological machinery, we are able to guarantee the highest quality and precision, always offering an excellent quality / price ratio. Our qualified and constantly updated staff is able to quickly manage any type of order, from small and medium-sized production to high-precision machining.
We are specialized in the creation of components for the sectors: Valves, Gas Components, Pneumatic Components, Automotive, Hydraulics, Hydraulic, Naval, Nuclear, Oil.

We are a 9001:2008 certified according to DIN EN ISO system supplier of mechanical machining technology. Our specialty is single and small batch production of high-quality, complex and dimensionally accurate components and complex workpieces. Our customers are mainly in the fields of special purpose machinery, jigs, patterns and model construction, precision engineering, plastics engineering, tooling, mold etc..

The Sacom is your one stop shop for CNC machined parts.
We work with our customers to develop their metal products from initial design to completed product. We’ve been in business since 2006 and have the expertise in manufacturing and customer service to supply our customers with the highest quality metal parts.

In 1877 the company was founded Uebele. Since then the company has grown steadily and today offers the complete program around the punching technique. We manufacture high sophisticated tools, high-precision fine blanked parts, stamping parts, bending parts, stamping and deep drawn parts and metal pressing parts. The assembly production and the production of small and large series are part of our extensive range of services.

For our national and international customers, we manufacture complex parts on the following presses:
- Deep drawing presses 400-4000 kN (table size up to: 2,000 x 1,300)
- Automatic punching 400-6300 kN (table size up to: 3,000 x 1,500),
- Fine blanking presses from 1,600 kN to 3,200 kN,
- Pressing machine to Dm 900 x 5 mm
- Press brakes up to 1,500 mm long

Materials / Materials:
Steel, stainless steel (1.4301 / 1.4571 / 4310, etc.) and non-ferrous metals
such as aluminum, copper, bronze and brass, and substance capable plastics.
Sheet thickness: 0.05 mm - 10.0 mm
Coil: 300 mm x 10 mm and 1000 mm x 8 mm

Product Line / products:
Fastening systems for photovoltaic systems such as roof hooks, shielding,
Cell connectors, mugs, fittings, spacers, flanges, housings, holders, sleeves,
Contacts, discs, covers, clamps, braces, disc springs, angles and gears

Toolmaking
The following services offered by our professional expert toolmaking:
- Project development to series production
- Tool design
- Prototype production
- Construction of composite tools, drawing tools, stamping tools, bending tools,
Fine-cut and cutting tools as well as devices

Subsequent processing
- Vibratory grinding, brush deburring, drums, tape loops with automatic feed
- Heat treatment - all standard methods (inter-stage hardening, Nitriding,
Hardening, and Nitrocarburizinga)

Surface Finishing / Surface coating
- Powder coating, KTL, painting
- Electroplated coatings of Au to Zn / Ni (chrome plating, galvanizing, burnishing)

Assembly production
As a system supplier, we offer our customers from different industries all from a single source - from product development to the mounted assembly.
- Inert gas welding (TIG / MIG / MAG)
- Robot welding
- Stud Welding
- Spot and projection welding
- Pressure joining (Clinching / clinching)
- Riveting, caulking, gluing