The SLR MetallbearbeitungsgesmbH, based in the year 1990, was taken over by SLR Gusswerk II BetriebsgesmbH as one-hundred-percent subsidiary factory in 1997. Since 1990 the SLR-MetallbearbeitungsgesmbH machines cast parts for SLR Gusswerk II BetriebsgesmbH by modern manufacturing machines. These cast parts are for the vehicle industry with high quality standard. Certification: ISO9001 Production of: CNC turning and milling turning workpiece milling parts contract manufacture of series production part assembly of component assembly for middle and high volume vertical turning and boring mill precision turned parts Products for: Drive and gear components Construction equipment Utility vehicles and agricultural vehicles Railroads, machine tool industry Hydraulic industry Materials: processing of all current metallic materials Machines: 11 processing center 7 CNC-lathes 3 3D-measuring machines 1 Broaching machine

The MEWEKA GmbH was founded in 1990 by Karl Storf and has about 25 employees in the areas of contract manufacturing and assembly works. Contract Manufacturing: After initially only milling, drilling and turning operations were done, were added gradually the production areas surface, profile and cylindrical grinding and wire and spark erosion. This modern manufacturing processes and high efficiency ensure a consistent, high quality, even for complex products. With maximum flexibility, we also achieve the shortest response times. For further manufacturing processes such as heat treatment and coating are our longstanding and competent partner. Individual and series parts Parts directly for the automotive industry, eg for racing Parts for the aerospace industry This materials used: Non-ferrous metals, such as aluminum, brass Plastics Steel Carbide Special materials such as heavy metals Assembly: In the assembly, we offer our customers the opportunity to finished assemblies including parts production to relate with us. This is a clear area of responsibility is deferred. Complete assemblies for mechanical engineering Jigs and fixtures Construction of tools Repair and manufacture of tools (including other manufacturers). We are your partner on whom you can rely on!

CNC Turning - CNC Milling - machine tools - Cutting - Metal Technology - Turning - Drilling - Milling - Welding - assembly

The story of success ZNTK - Radom GmbH was founded in 1887. Since the company's founding principle of our is the constant development and modernization of the products offered. The products of our company are mainly intended for the railway industry. We specialize in the production of the valve elements that are used in train braking systems. Our mission is to deliver the parts for the rail industry, which have been manufactured with the highest quality. Our goal is to ensure the best delivery and prices to our customers. Guarantee the highest quality Our professional and highly qualified staff together with the experienced management guarantee the highest quality of products and services offered. Internal quality management system ensures the fulfillment of your refined quality requirements. Width production possibilities ZNTK - Radom Ltd. specializes in the production of parts and equipment that are used in the rail industry and the automotive industry.Our professional staff and the universal machines enable the production of parts and assemblies according to customer specification. We can also easily adjust our production capabilities to meet customer expectations. Thus we have the flexibility to accept various orders of the metal industry. Our production capabilities include: - Machining - Ductile forming - Heat treatment: Carbunieren and inductive hardening - Electric melting and Gasschmelzscheiβen - Surface treatment - Sandblasting - Painting - Assembly For the majority of our products, we use CNC machines. Striving for the ever-evolving customer expectations, ZNTK - Radom GmbH focuses not only on the highest quality of offered products, but also on the search for new production solutions that satisfy the data reported by the customer's needs to the best level.

Teknia Automotive is a family owned company with headquarter in Spian. We are focused on development of components, assemblies and specific manufacturing processes for the automotive industry. 20 years of experience, 2,000 employees, 17 plants and a global footprint contribute to the success of the company. The Machining Division of Teknia Automotive is responsible for turning and machining technologies. Our plants are located in Spain, Poland and Brazil. Additionally to that, we have an office in Stuttgart, Germany which is responsible for Business Development and Key Account Management of the German market. Our product portfolio includes high-precision and safety parts such as nipples, bolts, pistons, valves, sleeves or connectors for brake systems, air conditioning, high-pressure fuel systems, transmissions, steering systems, clutches and gear shifts. Our components are manufactured in small and medium scales (rod diameter 4 - 58 mm) on both CNC mono- and multispindle, mechanical multispindle machines and mechanical transfer machines.

Our company has been operating since 1937 in the industrial sector as AUTOMATIC TURNING COMPANY engaged in the manufacture of precision small metal parts to customer design for the mechanical industry, in particular automotive, hydraulic and pneumatic components, as well as the production of a wide range of bearings ball to customer's drawing. The operating department is equipped with multi-spindle automatic lathes, mechanical and servo-controlled with CNC, which allow to execute special parts, with diameters and hexagons ranging from 3 to 70 mm, which can be finished with heat treatment and GRINDING. We also produce a wide range of special low-speed ball bearings.

We deal with machining on numerical machines. The company's main specialty is cnc turning and cnc milling. We work with recipients from all over Europe.

We invent, design and produce high-precission machinery for the world’s leading manufacturers of genuine leather products, operating in the luxury goods industry. We work “hand in hand” with our customers to lead them to the completed solutions that they seek. Our goal is to help them to reduce labor costs and increase their profit.

Pheifer industry technology Producer of (fine) mechanical components mainly from stainless steel, aluminum and plastic. From single pieces, prototyping to serial turning, milling work A deal is a deal, you can rely on us. Orders are ready on time, according to spec's, quality and a competitive price. We go for long, constructive collaborations. Short lines, no-nonsense, good communication and openness. • Emergency & serial work • Modern machining department with automated CNC turning & milling machining centers • Quality • Finished products are measured and carefully packaged for delivery. • Technical options: Turn up to Ø300 - L = 400mm Milling up to 500x500x500mm. Customers: Machine and equipment construction, Food, Chemical, Medical, Offshore, Environmental industry

Miroglio & C. Company works in the precision mechanical field with CNC lathes and machining centres producing components, having a production range diameter from 4 mm up to 250 mm. Our company is specialized in working with high resistance special steel grades to supply a finished product (including grinding, heat treatment and surface treatment) to the end-user. Our design and production capabilities cover prototyping, small and medium series, and up to high volume quantities. We can also supply forged parts, both hot and cold, and extruded components through our partners to provide you with a full complete solution to your mechanical components requirements. Miroglio & C has been supplying directly to major industrial vehicles and automotive passenger vehicles. Our experienced Technical Staff, equipped with the CADCAM system, are able to provide feasibility studies and work with your Designers to co-design products at the most competitive costs. Miroglio & C is certified in according to the automotive norm IATF 16949 (ISO 9001), environmental and safety norms, ISO 14000 and OHSAS 18000 and works with modern machineries to ensure the supply of high quality parts to its clients.

FAT has focused on the production of both conventional and CNC controlled flat bed CNC lathes. Since 2001, our product line has been extended with a modern slant bed CNC Lathe and CNC milling machine. About 95% of FAT’s production is for worldwide export. A huge milestone was reached in 1992 when FAT produced the 50,000th machine tool. Based upon more than 60 years experience in machine tool design and production we may also offer excellence is the production of gears (tooth wheels). Our installations obtain a quality level 3 according DIN3962 for the profiles; straight, bevel, helical and involute gears.

We have learned our craft over the years at machine tool manufacturers, weapon manufacturers, plastic parts manufacturers, electrical machine manufacturers and hydraulic component manufacturers. We worked with multi-spindle and multi-axis machines from single parts to large series. We have been manufacturing in Dottikon since 2008 and are happy to share our experience with our customers.

DROP-SHOT CNC is a family business where the experience and passion for creating details are passed down from generation to generation. We've been in the market since 1992. We don't forget our story, but we write a new one every day. We specialise in making details on lathes and CNC milling machines. We have the latest generation „Mazak” company equipment, which together with the necessary knowledge allows precise production of elements. For years we have been cooperating with Polish and foreign companies throughout the European Union. We do not want to talk about successes - satisfied customers say more than a thousand words about our work. We manufacture details on lathes and CNC milling machines using the latest 4.0 technology. We carry out orders based on technical drawings and thorough verification of your needs. We also reproduce elements without technical documentation. We specialise in unit, small batch and multi-series production. Our machines are equipped with rotating tools and additional axes. This enables us to work faster and more precisely. At the same time, we treat each idea individually. We approach the order price in a similar way. Write, call us or drop in for a coffee - let's talk about the details.

For more than 40 years we have specialized in the machining of series and large series parts. Customer satisfaction is our top priority. This is guaranteed by the highest quality with stable prices, short delivery times and maximum flexibility. Related services such as material planning, packaging and transport are a matter of course for us. As a global company, we support our customers from the automotive industry and many other sectors with the greatest possible service, highest precision and price stability.

Dniprolymermash PJSC – is a ISO-certified ( 9001:2015) heavy engineering plant active in the fields of manufacturing and machining of -optional equipment (spares, assemblies and units for oil-and-gas industry, mining, metallurgy and others) -heavy steel structures (for metallurgy, bridge structures, motor/railway/bridge crossings, frameworks of buildings) - press molds for pneumatic and solid tire vulcanization (up to DN5000 mm) , tubes, rim bands and diaphragms.

Claesson EngineeringAB is a producer of mechanical part for a wide range of business areas for example medical and automotive. With our machines we can produce all the parts that our customer requires of us and we can do in a wide range of materials. We only work with the most suitable CNC machine and have highly skilled operators to guarantee that the work will be done exactly as the customer require of us. ServicesExcept Turning and milling we can offer our customers a lot more. We can laser engrave parts with for example add batch number,part number or just a logo. We take care of surface or heat treatment if that is required and deliver the part packed and ready when our customer receive the delivery from us. We can also make assemblies and take care of the purchase or sheetmetal is there is a need for laser cut and bended parts.

USIMECA - Metalomecânica, Lda., Founded in 1988, is a company dedicated to the manufacture, trade, export and import of metalworking parts and mold structures. With over 30 years of experience, the company develops precision components in both domestic and international markets for different sectors, including molds for plastics, glass and ceramics, aeronautics, steel and machine manufacturers.