We have specialized in multi-sided machining (mainly light metals such as brass or aluminum).

CNC TORQUE * CNC MILLING MACHINES
Turned parts, milling parts from Lutex: Low-cost. Durable. Reliable.

Dear Ladies and Gentlemen,

Company Lutex manufactures parts quickly and economically just-in-time: according to drawing,
From prototypes to series, from CNC turning parts to CNC milling parts.

Qualities with which I convince:

• High flexibility, even with short-term inquiries
• Reliable customer service: from quotation, through to production and delivery
• Cost-effective production with high quality
The accompanying company brochure gives you an impression of my performance spectrum.
One, I hope, positive impression, which I at a personal discussion or equal at
A first order. You will find conditions on request immediately.

CNC machines:

CT 20 Gildermeister - turning D180mm L = 250mm / small series from 30 to 10000 pieces
NEF480 Gildermeister - turning D480mm L = 1000mm
CNC strojtos - milling - x = 500 / y = 320 / z = 360mm
Lathe new - D500 / L1500

Gallery realization on: www.lutex-metale.eu
Best regards,
Lucjan Bulenda

Lützel CNC Technik GmbH in Waldstetten, centrally located between Augsburg, Günzburg, Memmingen and Ulm, has been one of the leading suppliers of turned and milled parts and CNC technology for over 23 years.

Our company was founded in 1999 by Christian Lützel and currently has 25 employees and two trainees.

As a supplier, we have been manufacturing series and precision parts for various areas for years.
Our company has PDF document stamping certification for safety-related parts (e.g. vehicle construction).

Due to our high standards of quality, adherence to delivery dates and prices in line with the market, we can demonstrate continuous corporate development.

In addition, we have the necessary technical know-how to be able to provide high-quality turned parts for customers with special requirements.

By using the latest technology, we meet the high demands of our customers. We also carry out the further processing of the parts up to the complete assembly. Special devices or assembly stations are made according to customer requirements.

We have been PDF document DIN EN ISO 9001:2015 certified since August 2013.

The Luwotec High Speed Cutting GmbH was founded in September 2000 by Andreas Ludt and Ingo Wolter. Our young company - and therefore you as our customer - benefits but from the many years of experience in high-speed milling which can be found among our employees. Because we know that especially in mold making knowledge, experience and the craftsmanship of the staff certainly a large part of the success of.

By producing high quality machined parts we want to convince you of our efficiency. We practice comprehensive customer proximity through consultation and flexible processing in working hours. Our overriding goal is to have satisfied customers successful in the market - with our products and our service.
The place in December 2008 Move to another location brought an enlargement of the production machinery itself. Thus we can take your orders react even more flexibly.

Also there was a certification according to DIN EN ISO 2001:9000 for our quality standards - and that of our customers - to be documented.

The use of the latest hardware and software, as well as the most precise machines for manufacturing and all facilities for objectively measuring and testing with homogeneous interaction with all our expertise, guarantees quality and reliability in marktgerechtem price / performance ratio.

For the team of LuWoTec High Speed Cutting GmbH Customer is not an empty word. Our employees are always striving to find the optimal solution for your needs.

Put us to the test!

The company LWF Lang GmbH was founded in 1987.

With our team of highly qualified employees and constantly on the
latest machines installed in the park, we were able to become a competent
Partners in many industries develop.

The latest CNC machines allow us to manufacture high precision.
Our parts range from small parts up to 3 m wide milling and turning parts.

Our range of services includes:
Machining: turning, milling, grinding, drilling
Delivery of turned parts up to a length of 3000 mm and a diameter of 980 mm milled parts up to 2600x1000x1000 mm.
Welding:
Repair and installation:
Welding parts: with certified welders according to EN 287-1
Spare parts: according to sample or drawing
Series parts: as desired, also with storage with us
Special jigs and fixtures: according to drawing, but without construction
Mondays: in pneumatics, hydraulics, electrics
Overhauls: used machines

The company LWF machines and special industrial equipment is a customer-oriented company.

We have imposed the obligation to fulfill by constant, continuous improvement of our quality management system, the future needs, expectations and desires of our customers as part of our material, human and financial resources with the best possible quality.

We see ourselves as partners with our customers and are interested in their success.

The declared objective of our quality policy is to achieve a comprehensive customer satisfaction through:
- Product quality, which reflects the agreements reached full.
- Compliance with the agreed delivery times and high delivery reliability

The company LZ TECH was founded in 2019. The prevailing type of activity is mechanical
metalworking, including CNC milling, turning and drilling. Besides this, we offer a range of
services related to welding, repair and regeneration of machines.
We have all necessary tools for metalworking including modern cnc milling machinery.
Our employees have many years of experience in machining. We strive to make all orders
carried out in accordance with the highest quality standards. We adapt to all new market and
customer requirements

We are a Trade-, Production-, and service company for technical industry componets with the heavyweight in the product ranges elastomer-, plastic-, fluid-, and drive engineering as soon as job safety and equipment.

Het Stempel was founded in 1955 as an Engineering Works. In recent years we have specialized in the manufacture of production machines in stainless steel which are being used around the globe.

In addition we also make a wide variety of products in stainless steel and other materials for various clients in various branches of industries.

Het Stempel is a production company that is equipped with the latest equipment, where innovation and development are of the highest level. Big enough to tackle the largest project and small enough to provide customized solutions.

A small selection of our possibilities: welding, milling, turning, stabbing keyway, sheet metal and rolling.

Machinefabriek Vernie specializes in metalworking and supplies customer-specific products and semi-finished products in steel, stainless steel, aluminum and plastic.

Do you want to have one copy turned or milling, or a whole series? No problem. Are you looking for precision work? No problem. Do you want turnings with a diameter of 1.5 meters?
No problem.

We are specialized in 3-axis milling, We are producer of stamping tools for automotive industry.

Also we design and produce tools for punching, welding station and device, mould for aluminium and plastic industry,

spare parts from non-ferrous metals, metals (soft and hardened).