machining

We manufacture your workpieces with high quality on our modern machine tools according to drawing specifications or according to our own design. Due to the variety of tools available to us, we are able to cover a large spectrum and carry out the orders promptly and professionally. Starting with complicated individual and special parts, components for general machine and device construction through to small and medium-sized series.


jig construction

The field of fixture construction includes a very diverse range of tasks. Good ideas, technical expertise and understanding are among our strengths. The interaction of technical know-how, our own mechanical production and the use of standard parts from well-known manufacturers allow complex quality products to emerge from our ideas.



repair work

In the event of failure or standstill of mechanical parts or systems, we will be happy to help you.

- Short-term procurement of spare parts or production in our own production

- Preparation of cost estimates

- Carry out possible optimizations on the product

Company Profile

1978
Founded as a mechanical workshop / tool by Reinhold Scheib
1984
The ... in our own production facilities
1998
Expansion of production facilities
2005
Acquisition by Wolfgang Scheib, toolmaker and mechanical mechanics technician

Seek help from the production of small and medium series
for CNC turning and CNC milling parts?

You want everything from one source?
All in best quality, on schedule and cost?

Then you've come to the right place!

Production profile

CNC - Turning

* Lining parts and shafts of Ø 8 mm to Ø 330 mm, up to a length of 880 mm
* Threads, including taper threads
* Radial and axial grooves
* Contour machining with internal and external radii and taper hard turning

CNC - Milling

* Parts of sizes up to 1000 x 750 x 300 (no five-face machining)
* Parts of sizes up to 750 x 750 x 200 (five-sided machining possible)
* Five-sided machining
* Milling contours
* Inclined holes
Drill and mill * Thread
* Deep drilling up to 35 x D
o eg 3 mm diameter x 105 deep
o eg Ø 4 mm x 140 mm deep
o forB. Ø 7 mm x 245 mm deep

Injection systems for marine and rail diesel engines

* Plunger, nozzle nuts, intermediate plates,
* Sealing rings,
* Flapper, piston ring, thrust pads,
* Follower rollers,
* Adjusting spindles, bearing flanges, housings,
* Valve adapter etc.

Pipeline and tank construction

* Nozzle heads, reducers,
* Adapters, connectors,
* Clutches, lids, etc.

Heating and Fittings
Laboratory Equipment
Vehicle
Engineering
Mould

innovative, metal-working company
produces components from sheet metal incl. milled and turned parts
specialised in developping solutions to realise specific requirements of customers

Optimizing the value chain of the customer:
The firm achieves this aims due to:
- counselling, support in constructing and
- designing your product
- from the prototype to series production
- everything from one source

definite technological orientation > consistent investment dicision
high degree of automation > production 365 days a year
or producing in multi-shift operations

highest quality standards at reasonable price-performance ratios

Production of aluminum, zamak and plastic molds. mechanical machining on die-cast parts

The MECplus GmbH is the metal, and plastic processing companies
for small and medium quantities. It is not important whether it
Single parts for appliances, samples and prototypes for the construction
should be, or small production runs.

Since its founding in 2000, offers the MECplus GmbH with 25 employees
efficient and innovative product manufacturing at the highest technical level.
We place high value on a long-term partnership
with our customers and employees.

The concept of short distances, we see significant benefits. Due to the close
Interplay of design and the individual production steps in our
House creates valuable synergies to high cost and short
Production lead times.

Individual and fast

Speed and flexibility geared to the needs of our customers
distinguish us.Through experience and routine solve our production specialists
straightforward so many futures or manufacturing problem for you.

Whether professional order processing, preparing detailed work plans
Parts documentation or initial sample reports, we left no gap in your
Production process.

For the benefit of your individuality and our performance, we are not certified -
if necessary, we ask ourselves, however, like to a single audit.

Metal and plastic processing

We consult widely, develop and produce your metal and plastic parts, as
Item or in small series. Larger quantities can, thanks to modern
Manufacturing Technology be manufactured inexpensively.

We manufacture for you:
- 5 Chiron machining centers with pallet changer
- 1 Stama 4-axis machining
- 1 Stama turning, milling center for 5-axis machining of the pole, up to 65 mm diameter
- 1 micron 5-axis center with 7 pallets
- 1 Fehlmann 5-axis center for small, precision components

Initial samples / pre-production / small batch / mass production

We support product development of active your idea about the initial sample,
the pre-series up to the first series with increasing numbers.

We are your production equipment and assist with bottlenecks from. We advise

to 1999 we work steadily and grow,
to meet the needs and expectations of our customers. We can supply virtually any type of high quality mechanical processing.
We worked and assembled parts for the aerospace industry,
where tolerances are minimal, the required quality standards are very high, and the traceability of the individual components is required.
Our customers are as different as our experience;
we can count on a group of people who understand the critical value
that a hundredth of a millimeter can sometimes have. Indeed, hand in hand
with the acquisition of new technologies, we have always implemented
and we continue to improve an appropriate quality control system.

From the components for drilling,
which go 2 km underground,
to a probe for Martian soil,
every day we face new challenges,
milling and turning complex parts and difficult-to-machine metals;
we are strong with a fleet of machines up to par, but above all with a close-knit team!

We, Median Zerspanungstechnik GmbH, see ourselves as a competent and innovative partner towards the client, who, in addition to the construction itself, also delivers the finished and tested product.



Thanks to our own high-precision 5-axis simultaneous milling center, we can implement developed solutions within a very short time.



Due to this highest possible proximity to production, we are always right on the pulse of the product and always have an overview of the progress of the project.

We always endeavor to cover all wishes and requirements that the customer places on us. That is why we also use the latest technologies.

In addition, for projects that overlap with other areas of engineering services, we use the opportunity to draw on a pool of freelance engineers.

This means that we can always ensure that they receive competent advice and that the product you need meets or exceeds your requirements and expectations.

With this state-of-the-art positioning of our company in competition, we combine competence, innovation, quality and proximity to production under one roof. This is highly valued by our customers - for over 15 years.

We are a small, but capable machining company based in Hungary.
Quick turnaround times, tight tolerances, reasonable prices and all-round support ensure successful projects!

MediKomp
From technical advice on the development and design to series production. With over 320 employees MediKomp stands for competence in terms of stainless steel.

Item production, assembly-ready components or complete assemblies: We offer individual solutions in medium-sized batches.

Benefit from our expertise

Customers in the following industries:
- Mechanical Engineering
- Medical
- Refrigeration and air conditioning technology
- Vehicle
- Architecture and Design
- Food industry
- Machine tools
- Pharmaceutical industry
- Computer Industry
- Electrical Engineering
- Laboratory and Analytical Techniques

Sheet metal processing
With our modern sheet metal working machinery, we offer this comprehensive technical processes
- Laser cutting
- Stamping
- Embossing
- Deburring Machine
- Edge
- Bending
- Forming

Machining
Our modern machinery from over 40 CNC milling and turning centers is the backbone of our machining.In addition, complementary technologies such as honing, flat and cylindrical grinding. The programming of the individual machines via a central programming system in order to realize your ideas quickly. Processed materials:
- Stainless steel
- Aluminium
- Brass
- Steel castings

Surface Technology
High-quality and homogeneous surfaces to customer requirements! MediKomp offers a variety of possible surface variations such as:
- Glass bead blasting
- V-2A-rays
- Grinding
- Powder coating
- Wet varnishing
- Electropolishing

Welding
Approved quality! Our welding experts are consistently trained and checked on a regular basis: so that every seam is sitting! In over twenty individual welding booths all common welding processes are used:
- TIG
- MIG
- MAG
- E-welding
- PPAW (powder plasma)
- Resistance welding
- Spot welding
- Stud Welding
- Laser Welding

Prototyping
According to your ideas, sketches or drawings we design and manufacture from concept design to series production: prototypes, first samples, custom made, test samples or pre-production parts as individual parts, assemblies, or as complete products includingElectronics.

We provide quick solutions here by rapid prototyping of plastic (ABS, FRP or CFRP).

Assembly
Based on our years of experience with the assembly of medical products, also including electrical components, we assemble your products according to your wishes and demands!

From simple assembly through to the fully assembled high quality OEM product:

We will deliver your product in the best quality!