NEW ENERGY FOR EARNED COMPONENTS
"Preserving values" is the credo of mechanical production at Bücker + Essing. We manufacture and process engine, machine and system components for industrial companies all over the world. In this way, we ensure the performance of technical assets - at our plant and at your location.

The service life of machines is one of the elementary economic factors for every industrial company. By refurbishing components, optimizing them through surface processing or manufacturing them according to your specifications, we ensure sustainable solutions in your production. Growing out of the in-house need for component repairs, our mechanical production is now used by companies from a wide variety of industries - from tool and machine construction as well as from the paper and plastics industry, (petro) chemistry, shipbuilding and wind power . In addition to reconditioning in our factory, our customers also benefit from our mobile repair and

Dear Ladies and Gentlemen of the TRUMPF,


My name is Carlo BALLA DONE, sales manager of the company Cellino srl - Torino (Italy).

The firm Cellino in 1950 as a supplier in the field of "METAL STAMPING / ASSEMBLY" of Italian cars and trucks - and special purpose machine manufacturer operates and for over 15 years supplying Europe jit / jis's leading manufacturer of commercial vehicles, tractors and agricultural machines and material handling - branch with items assemblies and high-degree complexity.

Our range of components consists of basically:

- CHASSIS / Stahlbbauten: Items with demanding welds or parts geometry and relevant plate thickness (eg Quetraeger and other frame components bwz complete pre-finished chassis - modules.)
- CABIN: Oeberflaecheteile or reinforcements / inner panels
- SONDERUMFAENGE: finished systems such as Handbrake
- ENGINE: oil pans and also from Waermeschutzbleche sandwich - material

My approach is now searching for a contact c / o Strategic Purchasing your order presentation of our company as a potential supplier c / o TRUMPF.

I thank you in advance for your help and remain

Schoene greetings from Turin

Carlo BALLA DONE
Cellino srl
sales manager

Strada del Portone 171/12

10095 Grugliasco (TO) - Italy
phone: +390113012671
fax: +390270058812
mail to: balladone@cellino-group.it

Cogent Steel Ltd is a supplier of nickel alloys, titanium, specialist alloys, duplex and super duplex and various grades of stainless steel.
Cogent Steel ltd also offer a wide range of forged products in various grades of materials to cover the requirements of the main industrial fields:
General Engineering, Chemical & Oil Industry, Power Generation, Automotive, Aerospace and Fastener market.
Round Bars, Billets, Ingots, Sheets, Flats, Rings, Pipes, Tubes, Forgings, Flanges (list of grades attached)
We can also offer finished machined components to specific drawing and specifications.
We look forward to future enquiries.

We design and manufacture parts or sub-assembly incorporating several technologies:

Plastic injection molding, ceramic injection, turning, mechanical studies,

Assembly, surface treatment, Cutting & Forming.

The D & N Kraftwerk GmbH manufactures and supplies for nearly 20 years, both on the basis of framework contracts as well as informally chosen projects piping and equipment for gas turbines. Here we are active both in the new plant, as well as in the service area.
Our activities range from the production of pipes and the procurement of components on their (possibly seaworthy) packaging to Kanlog message or the worldwide shipping on their own.
The range of processed materials we range from simple carbon steel via heat resistant steels as 16Mo3 and CrMo-alloyed steels up to austenitic 1.4571 and comparable materials, as well as their counterparts from the ANSI range.
We manufacture according to the current regulations such as EN13480, PED and ASME in the nominal size range from DN8 to DN2000.

Our offer includes the full range of valves, gate valves, ball taps and cocks, throttles and other fittings as well as installation equipment (flanges, straight elbows, couplers, etc.). With regard to pumps we chiefly offer general-purpose pumps and pumps for central heating systems as well as pumps for polluted water.
We offer only new products, with all the quality certificates, attestation documents and warranties in writing (for pumps). Our bid includes also products of world well-known and famous foreign produces (from Czech Republic, Slovakia and Germany) along with modern products related to heat transfer and regulation systems (Grundfos, Danfoss, Hontwell, Polna Przemysl).
We provide authorized services for the products manufactured by the Pump Factory from Leszno as well we have been entrusted by the SZAP "Armak" company from Katowice to carry out authorized regulation and resetting pressure range of emergency valves.

We are thermoforming machine and have a flexible cost-effective method for producing components of different geometry and characteristics. Low use of materials and high output guarantee cost-effective products.



The procedure

In the usually multi-step process panels are shaped by train-pressure forming gradually into hollow bodies.

Characteristic is the continuous reduction of the volume of the hollow body and, if not otherwise intended to no change in the thickness of the drawing operations.

Through integrated into the work process additional operations can be flexibly even more complex geometries, breakthroughs and create holes. However, high operating speeds can be achieved. This and the benefits of a fully integrated work process offer high efficiency.



I was a disc

Starting point of each manufacturing operation is the Ronde, tailored to the later part geometry flat disk.Due to the low proportion of waste as related to deep drawing is characterized by particularly low material usage as opposed to other manufacturing methods. This offers high potential ratio for the part. By substituting for other work practices, such as turning, die casting, etc. This also applies to existing products.



Our focus on innovation

Through continuous development of the process we are now able to integrate complex additional operations (such as threaded parts) in the work process. This provides technological advantages and if appropriate quantities disproportionately high cost reduction potential for the product.

We are continually working to develop always more innovative solutions for our process and gain advantages for our customers' products.

Fastenex S.L., is a group established in 1986, formed by manufacturers of standard and special fasteners and screw machines parts as per drawing.

Nowadays, we are selling our products in more than 20 countries, principally in Europe, and to more than 200 customers. And so, we present Fastenex S.L., as the export department of the manufacturers shown hereinafter.

We at Fastenex S.L., with the support of the manufacturers of our group, shall try to assure you always, the best quality in our services and products.

The parts we make:
Washers
Rings
Hotforged Bolts
Screws
U-Bolts
Nuts
CNC Parts
Dowel screws

Besides special parts, we manufacture these normparts:

DIN 471
DIN 472
DIN 6796
DIN 6799
DIN 137
DIN 2093
DIN 6798
DIN 7967
DIN 463
NF-25514
NF-25510
DIN 186
DIN 188
DIN 601
DIN 602
DIN 603
DIN 604
DIN 605
DIN 607
DIN 933
DIN 929
DIN 928
DIN 933
DIN 934

We are manufacturer of stainless steel expansion joints for piping, equipment, apparatus district heating and shipbuilding. and also, for eg the exhaust air, exhaust and clean air technology. The elastic, pressure resistant and high temperature resistant metal bellows for expansion joints are hergstellt by mechanical processes and hydroforming.

From nominal diameter DN 16 to DN 6000.

From nominal pressure 1 bar up to PN 160

PRESENTATION OF "GERMANI" ltd

"GERMANI" Ltd is a company founded in 2004 and was for nearly a decade has managed to walk the safe towards realizing its objectives.
Currently it possesses a modern technology metal work. Basic machines are CNC-controlled German production and work with CAD-CAM programs.
Success is guaranteed with staff specialization in Italy, with the methodology and technical requirements of the European standard metal products such as special furniture, home appliances, industrial equipment, parts for elevators where: doors, cabins, staffing, different chassis, etc., occupy a leading place.
"GERMANI" Ltd is organized by specialized departments:
1. Department of elevators "GERMANI-ELEVATOR"; The main task is: production of all range of mechanical elevator. Elevator cabin standard and custom; engine chassis, cabin and counterweight; Every staff for the wall type and shine; elevator door complete with any type of material; etc. Leader in the domestic market and exporter in Kosovo, Macedonia, Montenegro, Italy, etc.
2. Department of metal furniture "GERMANI-MOBMETAL";
Department "GERMANI-MOBMETAL" recently has realized productions in several special projects or productions by order customers.
Were typical work being you present the following as possible that our company has in this area.
1. Projects for the collection and recycling of waste (waste bins, containers, recycling units, etc.).
2. Projects for gyms, enterprises, schools, etc. for the production of wardrobes for placing clothing, vehicles or tools.
3 new products in the field of culinary uptake.
4. Telecom cabinets with and without microclimate, accessories and other technical and marketing.
5. Basis of cash registers.
6. Shelves and accessories for markets and supermarkets.
7. Cabin and the elevator doors of all types.
3. Department of Alternative Energy "GERMANI-ENERGY".
The main tasks:
a. Design, implementation, maintenance, repair of systems for generation of electricity from the sun, wind, biomass, etc., from 300w up to 100 kW and more.
b .Sisteme alternative energy for households, businesses, institutions, farms, etc;
c .Sisteme independent from the sun or wind, hybrid, combined with a unified network or generating electricity, etc;
d .Sisteme street lighting, parks, camping, security facilities, ndicues guide traffic, etc;
e. All for alternative energy. Have an idea, project or suggestion, you can discuss with us and it is possible for a new reality.
4. Production Department bitub "GERMANI-BITUB".
For details see the www.germanibitub.com

The company "GERMANI" possesses a modern technology and complex even for special welding processes of metals and metal hardware. Technology and high qualification of specialist staff - engineer techno- achieved great successes even in other areas of metal: lathe; metal punching press; CNC plasma cutting machine; CNC laser cutting; Shearing machine; electrostatic dying, etc.
How can cooperate?
1. You send project - the task and write you back for the possibilities of its implementation.
2. You send a sample and we realize it. Then change the and decide what you are looking for.
3. Direct negotiations for details of cooperation.
Hopefully in a serious and long term collaboration, whether match the interests of our businesses.
Hope in your message for this collaboration.