The New Hauser Group is the holding company of the 26 currently single company with 2,195 employees and an annual turnover of 450 million euros in 2008.

The activities of each company can be found in the following business areas again

Textile
• batching
• centerwind
• traveling cleaner
• Transport systems (cheeses, roving bobbins, spinning cans)
• suction and vacuum systems
• coating and dry locations (use behind Web and knitting machines)
• storage systems for bobbins
• Palletiersysteme

Contract production, such as
• Rotating parts (pistons, bushings, washers, rings, cones, control piston, shaft, axles, hubs, pins, screws, spindles, pins, cylindrical rollers, rollers verch. Sizes, etc.)
• Milled Parts
• complete machine and plant construction according to customer requirements from design to
Installation and Service
• roller production (up to 8000 mm total length)
• Locksmith
• Wage measurement (modern measuring room includingPortal meter Zeiss MMZ G-25 30 20)

Commercial Vehicles
• Production of portal elements
• Profile editing
• Installation
• Coating

-Machine Elements
• Expanding shafts
• Clamping Couplings
• chucks and adapters
• friction and blade shafts
• Shaft handling

-Kompressorenbau (shipping)
• Start air compressors
• pressure vessel
• Industrial Compressors
• compressed air starter
• Air-conditioning
• bilge oily water separator
• Biological treatment plants

Environmental engineering
�� Screw mills, up to 120 m³ / h
• starscreens
• Shovel separators
• air classifier

Products for the steel industry
• Band edge processing facilities
• rolling mills
��� conveyor systems


A growing product range and increasing demands of customers from individual divisions make a steady and adequate investment readiness required for a stable and healthy growth of the company can be secured for the future.

A particular interest is that in the group a technology-and innovation-friendly climate is to be promoted in the unconventional thinking and new ideas

The company Neumann + Hoffmann has worked as a subcontractor and supplier for many global enterprises from various parts of the plant and machinery.
The turning of parts from Ø 6-Ø700mm, as well as the milling and assembly of components primarily in the materials stainless steel and aluminum is our home. Our measurement capabilities guarantee process reliability.

New in our production program is the double-lid-lock system in five different sizes, which we can offer as a separate product. More information on these, please refer to our website.

In the present time are customer orientation, quality, timelines and an appropriate price-performance ratio for a successful business.
These criteria are based on over 30 years of experience at the highest level of competence and motivation of our employees.
Modern machines, permanent process optimization and our highly trained staff ensure a friction-free production process.

You can rely on the team of the Neumann + Hoffmann GbR.

We can

Turning
· Small parts from Ø 6mm
· Large parts up to Ø 700mm
on modern CNC machines, some with driven tools
· All materials
include aluminum, plastics, non-ferrous metals and
high-grade stainless steels

Milling
· On machining centers with
B-axis (rotary table) to traverse 800x630x630mm
· 3-axis machining center with 560x1100x600mm traverse

Heat treatment and surface engineering
· Harden and reward, also of special materials
· Functional and decorative surface treatments such as anodising, DURNI-coatieren
ualia in collaboration with long-term partners

3-D metrology
· Measure of production parts for process safety
· Creation of first article inspection reports and test records
· Wage measurement
· Travels X1000 Y1200 Z900

Component Assembly
· Installation of manufactured or-supplied parts with us to complete units
· Testing according to customer specifications with test report


R apid T ransfer S ystems

α - β double-lid-lock system


Application:

The RTS lock serves the contamination-free loading and unloading of isolators, mini-environments, glove or glove boxes, barrier - or containment - systems.
This system consists essentially of two parts:
the α-and the β-port port
The α-port, the transfer port and is fitted in a dimensionally stable wall of the device. The self-contained β-port houses the einzuschleusende material or

Dear Sirs and Madames,

Are you looking for a reliable partner that produces for you and that is of high quality and with punctual delivery?
You are lucky, your search has ended, you have found the company NMT ...

The company NMT is a contract manufacturer in the CNC turning / milling technology as well as water jet and laser cutting with our cooperation partner.

Under the uploaded documents you will find a pdf with the name "The NMt introduces itself". Take a moment and read more about the NMT company.

Best Regards
Benjamin Nassiri
(Chief Executive Officer)

With high productivity and pronounced flexibility we support our customers
event of planned or unplanned processes.

Take advantage of our production capabilities, and our experience to your advantage.

- Mechanical processing such as milling, turning, drilling, grooving - spaces
CNC or conventional
- Assembly of components including pneumatic, electrical or construction


Demand Unexpected wear, collision, unplanned events
quick action

- Manufacture of individual parts according to data, samples or consultation
- Modules - eg partial assembly if desired with all purchased parts
- Subcontracting including procurement of materials and treatment

The company Norbert Sapp is a medium-sized company with about 30 employees and is currently in its 3rd Generation of a family business.

In addition to configuring systems for surface treatment (pre-treatment equipment, dryers, conveyors) is the "2.Standbein" the company steel construction, steel and welding constructions, general sheet metal processing and manufacturing of machine frames and housings. These are produced both by customers drawings also constructed 4 CAD work to customer specification and manufactured inexpensively.

Our Performance:
 cutting up to 12 mm thickness and 4000 mm length
 CNC - folding up to 4000 mm length and 300 tons
 CNC - Fine beam plasma cutting up to 6000 x 2000 x 15 mm
 CNC - oxy-fuel cutting up to 6000 x 2000 x 200 mm
 CNC - Punching 3000 x 1500 mm
 Turn Around 3000 x 6 mm
 procedure test all common welding processes
 specialist authorization according to § 19 WHG with monitoring contract with the TÜV-Nord
 Small Verification of suitability in accordance with DIN 18800

Our product range:
 steel construction
 welded constructions of all kinds of steel, stainless steel and aluminum
 piece weights up to 15 tons
 CNC stamping parts
 Complete assemblies including mech. Processing
 machine frames and housings
 General sheet metal processing, profiles, flashings
 Surface-coated components
 assembly work

For over 20 years, Nordform, a company from South Tyrol (Italy), has specialized in sheet metal processing, powder coating, the production of steel frames, and professional pre-assembly. Our commitment to the production of high-quality products forms the foundation and distinctive hallmark of our business.

Our goal is to provide a personalized consulting service led by an experienced team, focused on understanding and satisfying customer needs. This personalized consultation accompanies the entire ordering process, ensuring a tailored partnership that represents the core of our comprehensive approach to solution development.

From the initial concept phase to the pre-assembly of components, we oversee the entire work process. Reliability and efficiency are central elements of our philosophy, contributing to ensuring your satisfaction.

Thanks to state-of-the-art, fully automated technologies, we successfully manage not only large order volumes but also guarantee the highest quality, even in the production of unique pieces.

We are not just suppliers but committed partners dedicated to offering high-quality solutions in steel and sheet metal.

We supply semi-finished goods, functional assemblies, product components, or finished metal goods to our customers' designs. We manage everything from engineering to delivery while providing all associated services, from directing the upstream supply chain to downstream logistics.

Our aim is to achieve excellence in our market segment, specializing in production processes with a high subjective contribution and based on a skilled and strongly motivated staff applying the best available technologies.

We are a company that deals with modernization, design and installation works, as well as performs relocation works. More than sixteen years we are engaged in the production of metal structures, installation of industrial equipment, modernization and relocation of production facilities in Ukraine and Europe. Our company manufactures any metal products to order according to individual drawings.