Since 1960, our company deals with the production of investment castings. Thanks to their high dimensional accuracy and surface quality investment castings are indispensable to modern manufacturing techniques. This fact gave us in the last few years a rapid development.
Approximately 3,500 tons of steel, and aluminum and copper alloys are shed annually at our factory in Riedlingen. Investment castings by the lost wax process in steel, vacuum, aluminum or copper-based alloys, including finish machining, surface finishing and assembly.

At Fimtech we cast aluminium components with full respect for our customers' needs and quality standards. Three various-sized casting machines allow us to produce castings that differ in shape and weight (from 0,1 – 5 kg). The materials used are EN certified primary or secondary aluminium alloys, currently available on the market.


Also, we at Fimtech provide sub-assembling services, with the integration of electric and mechanical components, manufacture electrical panels and other control boards. Our products are suitable for a wide range of applications: industry, electronics, power electronics, lighting engineering.

Fimtech works as a subcontractor or cooperant in the assembly of various electrical/mechanical components and devices.
During many years of work in the field, we gathered valuable knowledge which enables us to produce even the most demanding and high-quality products. Fimtech assembles different products according to the requirements and design of our business partners and therefore help them reduce the manufacturing costs.

COMPANY PROFILE

Fisep (www.fisep.com) was founded in 1967 and is a reference point in the production of technical aluminum high-pressure casting (HPDC) and hot-forged brass components, in Italy and abroad, which are mainly used in the automotive industry, industrial pumps, electric motors, earthmoving equipment, gas and hydraulic valves.

In 2018, the company was purchased by New Olef (www.newolef.com), a historic foundry in Brescia, which specializes in the production of technical aluminum alloy components through low pressure casting (LPDC) and gravity casting. The acquisition by New Olef, part of Capigroup, enabled Fisep to add continuity to its growth and implement an important investment plan in terms of human resources and new technologies to meet the challenges of a constantly evolving market.

Fisep provides comprehensive customer support, starting with feasibility studies, MAGMA simulations, co-design, planning and project management activities.

In addition, Fisep can offer its customers turnkey solutions, which, in addition to hot forging, also include the production of molds with highly qualified partners, precision machining and assembly activities.

The HPDC plant has 16 automated work islands with clamping forces ranging from 170 t to 1450 t, which can produce castings up to 25 kg. Equipped with lubricants, operated by anthropomorphic robots to handle and separate the castings. The foundry consists of 4 melting furnaces, which make it possible to process various aluminum alloys at the same time. The finishing department has 3 different types of sandblasting machines.

The brass hot forging plant has 6 working islands with clamping forces of 150 t to 320 t, which can form components up to 2 kg. Equipped with graphitization machines and autonomously controlled billet heating furnaces. The CNC machining department consists of 4 CNC transfers and a 4-axis machining center with a rotary table.

Fisep is certified according to UNI EN ISO 9001:2015 and IATF 16949.

Fonderia Persicetana has been working for over 40 years in the field of light alloy aluminium casting. The experience and the know-how accumulated over the years enable us to satisfy any market request, thanks to continuous investments and expansions aimed at boosting the production capacity and improving the technical quality.

SA.BI Foundry, founded in 1968, has undergone various phases of development throughout the years and has become a leading company in the field of the production of grey and spheroidal cast-iron castings also with additional machining.

The current production capacity is 30,000 tons of ductile and grey melted cast iron.

The flexibility of its production and logistic structure allows SA.BI to be competitive in the production of cast-iron castings of a weight between 4 and 700 kg in medium and large series.

The company, certified ISO 9001:2008, has a quality control system in each production cycle, starting with the selection of incoming materials and going through up to the despatch of the machined castings.

precision casting using the lost wax.

Company founded in 1984 current 130 People .Effectif.

Pressure casting of non-ferrous metals, alloys Zinc (Zamak) and lead
Main sectors: building 70% cosmetics, nuclear
Integrated machining work

Lead Specialist in Zamak and pressure die casting products from 0.1g up to 1Your
Main sectors: housing at 70% and nuclear industries Cosmetics products
Integrated machining

Core Business:
• Development, production and processing of highly loaded lightweight parts in iron sand casting for a variety of different applications in different industries.

Locations:
• 2 production sites in Germany - Singen and Mettmann

Market position:
• Europe's leading supplier of spheroidal cast iron - components for cars, trucks and non-automotive

Special knowledge:
• Proven know-how for the development and series production of components in ductile iron casting (spheroidal cast iron), e.g. for safety components in car chassis and for truck wheel hubs and frame attachments.

In-house developments:
• high-strength cast iron material SiboDur
• Analysis methods for obtaining optimal material properties for components
• Composite casting with iron and light metal materials
• Welding of cast iron

Development and validation knowledge:
• Product development with the support of the latest computer-aided simulation (CAD & FEM)
• Prototype production under series conditions
• Casting-specific material and process development