As your competent partner on "bending - welding - punch" we will introduce you to our company and our activities.

As a small medium owner-managed company, we can respond flexibly and individually to your needs. The many years of single-run company was acquired on 01.04.2011 by the metal Neubauer GmbH & Co. KG. Through this acquisition, we can rely on the experience of our 40 employees. Due to continuous modernization of our machinery, we produce future-oriented and price conscious.

We manufacture various plastic components individually according to your wishes and requirements, as well as support you with our know-how in the planning and implementation of your project. With our various processing methods, we have the possibility to carry out the entire component processing.
Alternatively, we will be glad to assist you in subsequent work such as contour adjustments or deburring of existing components.

The New Hauser Group is the holding company of the 26 currently single company with 2,195 employees and an annual turnover of 450 million euros in 2008.

The activities of each company can be found in the following business areas again

Textile
• batching
• centerwind
• traveling cleaner
• Transport systems (cheeses, roving bobbins, spinning cans)
• suction and vacuum systems
• coating and dry locations (use behind Web and knitting machines)
• storage systems for bobbins
• Palletiersysteme

Contract production, such as
• Rotating parts (pistons, bushings, washers, rings, cones, control piston, shaft, axles, hubs, pins, screws, spindles, pins, cylindrical rollers, rollers verch. Sizes, etc.)
• Milled Parts
• complete machine and plant construction according to customer requirements from design to
Installation and Service
• roller production (up to 8000 mm total length)
• Locksmith
• Wage measurement (modern measuring room includingPortal meter Zeiss MMZ G-25 30 20)

Commercial Vehicles
• Production of portal elements
• Profile editing
• Installation
• Coating

-Machine Elements
• Expanding shafts
• Clamping Couplings
• chucks and adapters
• friction and blade shafts
• Shaft handling

-Kompressorenbau (shipping)
• Start air compressors
• pressure vessel
• Industrial Compressors
• compressed air starter
• Air-conditioning
• bilge oily water separator
• Biological treatment plants

Environmental engineering
�� Screw mills, up to 120 m³ / h
• starscreens
• Shovel separators
• air classifier

Products for the steel industry
• Band edge processing facilities
• rolling mills
��� conveyor systems


A growing product range and increasing demands of customers from individual divisions make a steady and adequate investment readiness required for a stable and healthy growth of the company can be secured for the future.

A particular interest is that in the group a technology-and innovation-friendly climate is to be promoted in the unconventional thinking and new ideas

The company Brünink-Neuenhauser Metallbau was founded in 1953 by the master blacksmith Albertus Brünink. Today the company is run by the second generation of the son of the founder, Bernd-Heinz Brünink.
The company Brünink is a family tradition and its own production.

Family-owned company with own toolfabrication and own production.

Production services in metal processing.
High production depth of sheet metal processing machine cutting over to the state of the art coating.

Company NEUTEC laser applications was by the present owner Walter Neumann
founded in 1999.

Walter Neumann previously worked already many years during that
Department and thus compensates for its theme-specific experiences
in-house.

Specifically, the technique of laser cutting was formed in this period always
out more than centrally focused power field.
In parallel, conventional manufacturing processes, have been retained.

This formed the company name: NEUTEC laser applications.


NEUTEC Laser Applications

manufactures laser cutting according to customer specification, according to drawings,
according to drawing or of finished dxf dwg -.. Files.

Alternatively, - also digitized NEUTEC, your ideas for you.
Besides laser cuts NEUTEC offers mechanical methods such as edging, bending, milling, drilling and other than wage labor ...
NEUTEC will advise you throughout the production phase from design to delivery.

Next3D is a Romanian Start-Up that provides outsourced additive manufacturing services.

We are producing metal parts from black and stainless steel using next technologies:
Plate laser cutting (up to 3000 x 1500 x 20 mm)
Bending, rolling, stamping, drilling
MIG, TIG welding, polishing
Powder coating
Assembling and packing

We propose for our clients:
Small and middle batches production
European quality
Fast delivery

All technical staff can communicate in English

The NIEROS GmbH specializes in the production of stainless steel products and has been in this area for a very long tradition.

We manufacture technically advanced products for the food, pharmaceutical, and chemical industries.

A main attention is paid to the development of our products and our know-how.

We offer you together with our partners a complete solution including advice and service.

NIEROS is a globally-oriented company, which exports more than 90% of its products. Our products are sold in every country in our well known partner.

Our basic product line stands for high quality and covers the needs of all discerning customers. We were exhibited in 1998, the ISO 9001:2000 certificate.

NIKO GAB was established in 2013 by Adam Gerlach with its headquarters in Izdebki
near Rzeszów NI K O_GAB specializes in designing, manufacturing and distribution of
assembly devices, turned parts and control templates for the automotive industry
Reliable advice and professional production of control templates are provided by 20
workers, who are employed in 3 shift work The first of our workers was employed in the
second half of 2014 One year later, another 5 people were hired and 2 shift work started
to take place 3 shift work has been applied since the second half of 2016

The greatest achievements:

earning the ISO 9001:2015 certification in the field of designing and production of
assembly devices and control templates for the automotive industry as well as
production of metal parts

evolving of appropriate models of work, which provide that details, parts, assembly
devices and control templates that are produced by NICO_GAB are of the highest
quality

widening the range of machinery park, which enables the increase of production and
decrease in time spent on order realization

The NIKRO group of companies consists of 3 companies.
• NIKRO GmbH in Marxen, founded in 1989 with approx. 30,000 m² of warehouse and hall space.
• NIKRO GmbH in Radeburg, founded in 2008 with approx. 28,000 m² of hall and production space
• NIKRO Surface Technology GmbH, Radeburg
The company NIKRO GmbH in Radeburg is a versatile and high-performance contract manufacturer for steel or metal processing. Our specialist staff manufactures sheet metal parts, welded constructions and bent parts according to your specifications, but also railings, steel stairs, stands, half-timbered structures and extensive steel components in our factory in Radeburg.
Individual and special constructions as well as individual and mass production are possible. We manufacture individual parts that are required for welding assemblies in-house. This option saves additional transport routes and is quick and economical.
We have extensive experience in the field of cutting, edge welding and painting of components made of steel or stainless steel. With our modern laser and flame cutting systems, drilling and sawing machines and CNC systems, we manufacture your components quickly and precisely.

Lasers



A laser penetrates contact sheets, tubes and profiles. At the point where the focused beam impinges upon the workpiece, the metal begins to melt away. This results in a narrower kerf, barely wider than the beam itself

We use the laser beam fusion cutting as a separation method for stainless steel, aluminum, brass, bronze and titanium. The combination of our 4000-watt laser system from Trumpf with the Fladder-deburring providing its customers a number of special advantages:
We can produce almost any shape. The material heats up hardly and does not warp. The cutting edges are straight, free of burrs and clean. The components can be processed immediately.

Bending



Bent parts can be found in technical applications in ever-increasing numbers. They enable materials, weight and cost savings. However, precisely bent sheet metal parts require extensive knowledge of materials, precise work preparation and true machine powerhouses.



We work with a Trumpf press brake with 6-axis stop, automatic angle measurement system and 230 tons of pressure.



In our work, preparing the optimum bend sequence is determined to create its processing using 3-D software. In addition to the geometry of the bending portion, the empirically determined characteristics of the material are considered. This can be programmed and produced within a very short time even complicated bent parts.


Welding



Stainless materials are now available in great variety. Exact knowledge of their behavior during welding are therefore a fundamental prerequisite for the quality-oriented performing welding operations. And: Stainless materials do not come around a corresponding weld-treatment if they are to remain rust-free.



As specialists in stainless materials, we offer our clients professional solutions around the welding and finishing of steel and aluminum.



We perform the welding process TIG, MAG and MIG and spot welding and stud welding. As a post-treatment process, we have preferably pickling and passivation, but also sanding or bead blasting.


Edit



Machine parts, panels, framing, or container - in addition to welded joints play mechanical joining techniques an essential role in the structural design of composite systems.



The additional mechanical processing of sheet metal, pipes and profiles fits into our production flow seamlessly. We manufacture holes, eyelets, threads and cuts and can offer our customers the manufacture of turned and milled parts made of rustproof materials as well as the riveting, bonding, welding or bolts injection of standard parts.


Surface


As specialists in stainless steel and aluminum we are very familiar with the decorative design of the product surfaces.We advise you gladly. Because the right surface treatment affects not only the appearance of the products. Also, the strength and the cleaning behavior are influenced by it.


Depending on the application or customer preference, the method of glass bead blasting, grinding, polishing, electro polishing, chromating, anodizing and powder coating available.


Labels can be designed as a laser marking, engraving or the screen printing method.

Nitera Mold company was founded in 2017 in a corporation with Nitera doo founded in 2000, and is engaged in consulting services and construction of metal substructures and structures.

The production program offers tailor made production line equipment, so most of our products are unique, and there is also serial production capacity.

Some of the production programs are Industrial furniture, Industrial fencing, Production trolleys. Also, the production program includes manufacture of dedicated tools and aluminum and plastic parts using a 1000 × 700 mm working area CNC milling machine.

The services we provide are plasticization services.

The consulting team comprises engineers who can design fixed and movable metal structures and make a 3D model of them.

Some of our clients are Zumtobel, Leoni, Johnson Electric, Xingyu, IMI, Minth.