ince more than 40 years your competent partner for light and heavy metal castings in sand and permanent mold.

The KDYNIUM, joint stock company
produces castings by the lost wax
(The rating of VW and CHRYSLER with RATING "A")
Since 1954 the foundry works for a wide range of customers. Many years of experience, that the best results and the best utilization of the benefits of the investment casting process are achieved when the designers and the customers and our top technologists already at the design stage technicians work closely together to achieve optimum component to entwickeln.Durch perfect use of all possibilities of the method also very complicated shapes of components can be realized.

When inquiring about investment castings we make you an offer including a draft of the investment cast design. Before the start of series production, our investment casting foundry is keen to get all the important information about the product to our responsibility and liability for the security according to the international standards, to do justice.

After acceptance of the offer, we produce failure patterns, as they are released, we start the series production. Construct for the pattern and volume production and we are producing such tools, the price for this will be calculated separately.

We strive to satisfy our customers through both the technical level of the castings as well as by the quality and adherence to delivery.

An experienced staff of KDYNIUM AG is always ready to meet your needs and also offers a consultancy service as well as help in solving technical problems in the design and use of investment castings

Welcome to the Kempten iron foundry Adam Honig AG. We produce high quality casting products in the cast iron materials cast iron with spheroidal graphite (DIN EN 1563) and cast iron with lamellar graphite (DIN EN 1561).
Our products are used in the industries of machine tools, textile, printing and special machine construction and in the area of rail vehicles, in the energy and wind power plant construction, power transmission, the oil industry, the pump construction, the engine and the automotive vehicle. More details can be found on our website under www.ke-ag.de.

Casting qualities: EN-GJL-150 to -350 and DIN EN-GJS - 400-15 to -700-3

Casting:
- Machine molding (sand green)
- Untouchables form of investment bale size 500 x 650x 300/280 mm
- Turning molding plant box size
. 600 x 600 x 350/300 mm to 900 x 1.200x 400/450 mm
- Furanharzformerei with unit weights
. from 1 kg to 8500 kg and box sizes up to 4,500 x 3,000 x 2,500 mm

Melting furnaces:
Electric Melting Shop:
- Two ABP center frequency Tandemschmelzanalagen connected in parallel with each
* 2 furnaces á 3000 kg capacity
* 2 furnaces á 6000 kg capacity
- Fully automatic, computationally-controlled Gattierungszusammenstellung
- Melting process center computer with process-integrated melting and analyzes evaluation

Measuring / Testing:
Metallographic and metallurgical material tests, spectral analysis, mechanical tests, such as hardness, train and notched impact test; destructive tests such as ultrasound and crack detection using the dye penetration, hexagon measuring machine (three-coordinate measuring machine).

Heat treatment:
Stress relieving, annealing, microstructure treatment.

Color treatment:
Coating with 2-component coating in electrostatic paint spraying
Diving system with one component varnish

Mechan. Processing:
Part and finishing
Additional services:
Design and materials consulting, and in cooperation with the Fachhochschule Kempten setting and voltage simulation (Magma)

We are a team of engineers, technicians and top-class specialists. We have a well-organized production facility and perfectly mastered technology and processes. We have over 25 years of experience gained through the implementation of millions of projects for clients from Europe and North America. We are a certified supplier for many international corporations, including those in the energy, shipbuilding and transport industries.

Our qualifications and operating philosophy reflect the reliability of our products and the ability to realize the most difficult projects that meet the strict requirements of our customers.

The companies Hoechenlimburger Metalgus and Heinrich Brinkman GmbH also belong to Kigema.

Przedsiębiorstwo Odlewniczo-Mechaniczne Kigema sp. Z o. O. announces merger with Kigema SPV sp. Z o.O. Find out more.

Kıvançlar Casting was established in 1981 in Ankara Sincan Organized Industrial Zone on an area of 2000m2. Kıvançlar is interested in cast iron and ductile iron casting works. We have a fully automated resin line. We also have a spectrometer laboratory where the necessary analyzes of the produced products are carried out

Company History

Our firm which was set up 1976 as a machining workshop in Eskişehir Industrial area today owns a plot of 7200 m2 is covered in Eskişehir organised Industrial area. Since 1996 our company produces machined products made of pig, sphero and wrounght material and i

n the same year our company became an ‘ Incorporated Commercial Company’.

Our firm which has served to many automative firm so far has a lathe and machinery park and iron foundry of considerable importance.

Products of our company are controlled in our own Quality Control Lab. With assistance of COORD3 3-D CNC technology, comptrollers masters etc.

KIVANÇ MAKİNA sells its products to many companies both domestic and abroad.

Kizilirmak DÖKÜM is one of the experienced Giesereien in Turkey based in Çorum

Kizilirmak DÖKÜM (Gieserei) and Kizilirmak MAKINA (Maschinenfabrik) are subsidiaries of Kizilirmak HOLDING and supply since 1980 took known customers at home and abroad with gray cast iron, and steel castings Sferoguss of 10 kg - 8.000 kg.

The company supplies the mining, cement plants, iron and steel industry, railway industry, the energy sector with hydropower and coal-fired plants and the general engineering industry with unalloyed, niedriglegietem and alloyed Stagluss, corrosion resisting steel castings, carbon steel castings, manganese steel castings, Ni-Hard, special materials as steel castings according to customer requirements in accordance with DIN , AISI, SEA and BE Satandards.
Our's products include brake discs and other parts are recently arrived in the express trains at SIEMENS, ALSTOM and BOMBARDIER used.

KOVIS produces brake discs, axle/bearing boxes and other parts for all kind of rolling stock (passenger and freight cars, metro and tram cars). Trough our foundry for grey cast iron (EN-GJL) and nodular cast iron (EN-GJS) we can offer various machined castings.
Our customers: DB (wea are DB Q1 supplier), ÖBB, SBB, Greenbrier, IRS, Bonatrans, Euromaint, ...

Our main program is production of Al sand and permanent mould castings in a total weight of 850tons per year destined for mechanical, textile, building and automobile industry, art casting and equipment for towns and municipalities. Our mechanical work-shop provides full cutting of aluminium casts and other materials (brass, steel, plactic and others).

History of our company

Tradition of Kovolit Česká dates back to 1936 when we started with building and production of drink fittings and bell-casting. Bell-casting had been done by Mr Manousek by 1953. Afer that this production was moved to Zbraslav. The production of drink fittings was finished in 1990.
Present situation

Nowadays Kovolit Česká specializes in production of aluminium sandcasting and moulds. Our 50 years´ experience in this field represents profound knowledge that can be seen in quality and accuracy of our deliveries. Total annual production is roughly 900tons of Al moulds per year. The main customers are engineering, textile and construction companies. The weight of aluminium casts are from 0.10kg 400kg. Our foundry offers models, moulds, cores and a process of sand drying. Due to customers´ wishes we also provide heat treatment, hardening, x-ray of aluminium moulds and testing of mechanical qualities of materials. A mechanical work-shop, that provides cast machining, milling, turning, grinding, drilling, varnishing and production of mechanical parts from all kinds of materials (Al, Ms, steel, stainless steel, plactic and others), is a part of our company. Kovolit Česká employs about 130 workers.
Why to choose "KOVOLIT ČESKÁ"

* Providing the quality by means of audit according to customer´s wishes
* Historical experience
* High quality
* Precise observance of the supplies
* High level of Know- how
* Efficient order plan with uniform distribution
* 60% export to Germany, France, Austria, Italy, Slovakia
* Settled and stabilized property relations

Coating

Coating is provided by:

* blasting (blast medium is corundum, balotin, sand, rustless crushed material)
* balling-tumbling
* Varnishing – komaxit
* Machine cutting
* Scurfing
* Polishing
* Special final filing
* Grinding
* Welding and preservation (shielding gas)

Special offer

* Manufacturing of aluminium garden furniture, decorative columns, traffic signs and their fixation – fixing lugs
* Aluminium welding, blasting, tumbling, cutting, grinding, polishing, ultrasonic cleaning (450x300x330), powder and wet varnishing
* Balancing – TWINGO-I static and dynamic balancing in the highest quality class (up to ø1000mm/60kg)
* Co-ordinate measuring machine TRIMOS VECTRA 600 Touch
* 3D CAD/CAM software Solid Works