Our company has now existed for about 30 years.

The business grew particularly due to our customer focus, customer service, and fast response time Preisgüntigkeit

We are now in a position to manufacture products in the countries where they process reliability and
Can be produced inexpensively.

In Eastern European countries, but preferably in Turkey.
Again, this is due to tradition and in the aforementioned countries is shed for generations steel. Consequence, these countries are well equipped for machining cast steel.

On the way committed by us has emerged over the past 30 years following philosophy:
Each casting, forging or plastic part is made made in the best organizations capable country or continent on the most appropriate for this production facility
delivered to the customer through a sophisticated logistics schedule through sensitive delivery modalities or Kanban deliveries be made from our warehouse Leonberg.

The company Richter moldings GmbH produces precision casting products in Asia, especially India and China.

Our production in the aforementioned countries is certified according to DIN ISO 9001 and TS 16949. We have the ability to provide all materials, such as steel and stainless steel alloys according to DIN, EN, ISO and ASTM.

All materials are supplied processed either raw or finished.

Our tolerances correspond to the VDG P 690 in the
Tolerance levels D1, D2 and D3.

Surfaces - RA and RZ subject to agreement with the customer.

For the dashboard area, we have approvals
After AD 2000 and TRD 100

Our testing facilities are not only the tensile strength,
Yield strength or notch toughness, but also
X-ray, 3D measuring and fluxing.

Surface options are rays, electro-polishing,
Browning, passivating, pickling or other galvanic treatments.

We supply castings from 20 grams piece weight up to a maximum of
20 tons.

Basically, we have the following options:

In sand casting:
Gray cast iron, ductile iron, cast steel, malleable iron, stainless steel casting,
Cast aluminum, cast magnesium.

In steel molds cast:
Centrifugal casting, permanent mold casting, die casting

All materials on the market are possible, including
Special alloys, which we can shed on request.

We supply small, medium as well as large series, where we for
The particular amount of the optimal method and the optimal
Place the router.

In general, all surfaces are possible, galvanic, galvanized,
blasted, electro-polished, primed, sanded, passivated,
KTL-coated as well as painted.

We test for the desired mechanical properties such as yield
As well as the notched impact strength (3.1 certificate), which also
chemical analysis contains.

We galvanize Chrome 6-free and can certify this as well.

All approvals (TÜV, Germanischer Lloyd etc.) Are possible.


In our company, the forgings have tradition,
for since the 80s and 90s we forged for
Engine Manufacturer piston crowns.

Today we operate in the following areas wrought:

Drop forged

Alloy structural steels
Stainless steels
Aluminum
Carbon steels

Forgings

Alloy structural steels
Stainless steels
Carbon steels

Machining of forgings
CNC machining and conventional machining

Mill
Grind
Boring
Honing
Threading
Lapping

Thus, it is important for our customers to know in advance an extensive process and material consulting with us. We supply raw components, machined components and machi...

Riedmüller Kunststofftechnik GmbH in Radolfzell operates successfully in three specialized segments:
-Acrylic glass processing and embedding of objects for advertising and technology.
-Machining, milling, turning, gluing, bending, laser cutting and finishing by printing and engraving.
-Injection molding technology with the latest machinery from construction to the finished article.
-Manufacture of PUR foam molded parts.

Well-known corporations and companies appreciate the precise work and the good balance between economy and quality of Riedmüller Kunststofftechnik GmbH.

RIFOCA has been founded as a worldwide operating industrie representation.

RIFOCA is a specialized market organization and integrated part of the sales organizations of it’s partners.

These partners are leading forging-, ring rolling- and casting companies producing a wide range of products, e.g.:
• small drop forged items up to heaviest open die forgings.
• seamless hot rolled rings in various shapes and steel grades - from the smallest to the biggest possible dimensions.
• grey, spheroidal graphite, alloy cast irons and centrifugal castings of nonferrous alloys and stainless steels.
For further informations see the section „Products“.

Together with its partners RIFOCA sees and accepts demanding tasks as a challenge (e.g. special materials, complex products, special services).

RIFOCA’s understanding of product quality, reliability and flexibility matches the one of its customers and partners.

ForgingCastingSolutions - We bring your construction into shape!

You have the drawing and we have the right foundry or blacksmith.
We procure your parts for you internationally at good conditions as requested and deliver them to your warehouse on time. These can be raw parts or machined parts. Also electroplated or hot-dip galvanized or painted.
Do you need detailed advice on the choice of materials, design or implementation of existing welded and milled constructions for new cast or forged parts? Then you are right with us.
Would you like to have all parts of an assembly fully assembled? No problem either.
We take care of the quality, the right packaging for sea or air transport, customs clearance and then deliver the goods to the desired delivery location. Also with special packaging requests such as printed cardboard boxes or the like.

With our experience for more than 10 years, we try to make everything possible, please contact us.

The Saxon diecast GmbH was founded in 1992 as a die-Saxon and electrical products GmbH, emerged from the VEB die casting, whose headquarters was in Borsdorf since 1954.

In 1995, the operation was performed in the final privatization.

During the year 2006, the aluminum foundry, tool and mechanical production was gradually shifted from Borsdorf to Beucha. At the beginning of 2007, the relocation of the entire Borsdorfer division was completed in the new and much larger facility in Beucha, which was accompanied simultaneously with an expansion of production and logistics capacity.

At present, our company employs 85 people.

As a longtime partner in all industries, from automotive industry, household appliances and electrical industry through to the light and heavy engineering, has Saxon diecast GmbH extensive experience in the production of light and Schwermetalldruckguß.

YOUR SPECIALIST FOR ALUMINUM DIE CASTING!
From development to prototypes to series production — with SANDER DRUCKGUSS, you get everything from a single source!

In over 70 years, SANDER DRUCKGUSS has developed from a mixture of tradition and progress into a leading medium-sized family business. As a reliable production partner for complex machined cast and system components made of die-cast aluminum, we have made a name for ourselves particularly in demanding industries such as automotive and medical technology. Ever increasing demands on products, particularly in automotive and medical technology, have decisively shaped and developed the company in recent years.

Our team of 70 motivated and qualified employees works passionately to cast aluminum die-cast parts and offer them from development and prototypes to series production and assembly. With our modern machinery and a strong emphasis on quality and technology, we offer tailor-made solutions that are precisely tailored to the needs of our customers. Our short decision-making processes and close cooperation with our customers enable us to react flexibly to requirements and guarantee the highest possible delivery and punctuality.

Our comprehensive know-how ranges from tool manufacturing to series production of ready-to-install cast components. Our products, which we sell in Germany, Europe and partly worldwide, serve well-known customers from various industries, including:

• Automotive
• Home appliance technology
• Medical technology
• Electrical engineering
• Building accessories
• Mechanical engineering
• alternative energy industry
• alternative vehicle energy
• and much more

Schapenberg Industries GmbH is an owner-managed, dynamic and internationally positioned company, based in Sprockhövel in the southern Ruhr area of Germany. Schapenberg Industries also has local presences in India and Turkey.

As a holistic system supplier we see ourselves as an expert in castings (steel, ductile iron, gray iron, aluminum, investment and centrifugal casting), turned and milled parts, forgings, stamped parts and steel welding fabrications.

Detailed informations you can see on our official corporate website www.schapenberg.de

We manufacture:

Ductile iron according to DIN EN 1563
Ausferritic ductile iron (ADI) according to DIN EN 1564
Silicon and molybdenum alloyed ductile iron
Cast iron with lamellar graphite according to DIN EN 1561
White malleable according to DIN EN 1562

More than 100 years of experience - this is our strength!

As early as 1903 was cast by the brothers Not for the first time at this location in Schönheide.

In 1993 the company was privatized and founded the Schönheider Guss GmbH. Our traditional company specialized in the areas of electrical engineering industry and general mechanical engineering.

Orders from other industries are also manufactured.