Find specialized suppliers for manual electrode welding on Techpilot. Our platform offers access to suppliers who use this technique to create strong and reliable joints. Benefit from comprehensive market transparency and optimize your supplier selection.
Founded
Employees
Certifications
Kester
Belgium - 1755
Founded
1976
Employees
10 - 20
Certifications
MANDELLO DEL LARIO (Lecco)
Italy - 23826
Founded
Employees
Certifications
Ter apel
Netherlands - 9561NS
Founded
Employees
Certifications
Ter apel
Netherlands - 9561NS
Would you like to know which suppliers are ideally suited to your requirements?
Register now and submit your request.
Metal carpentry, laser cutting, metal and PE bending, turning, milling, welding, technical department and design. Construction of serial parts, construction and assembly of machinery
Founded
2002
Employees
20 - 50
Certifications
MALO - VI -
Italy - 36034
Dear Sir or Madam,
We are a locksmith company in Eger (CZ). We produce steel structures, construction of industrial buildings, orders and mass production for companies and households among others in the automotive industry. We pay attention to the quality of work and timely delivery. Satisfied customers is advertising invaluable.
Founded
Employees
10 - 20
Certifications
Cheb
Czech Republic - 35002
DLK Ventilatoren GmbH has had experience since 1974 and is now actively represented on the international market. We therefore also offer you an enormous range of products for axial fans. As the most common fan, especially in the areas of industry and air supply, ventilation and more, the axial fan is particularly in demand because of the high air throughput.
Our production focus is on the low-pressure and medium-pressure fans. You will find axial fans in a wide variety of designs and sizes with the corresponding efficiency and the required frequency. The fans are equipped with safe explosion protection. The usual size ranges from 315 to 2500 mm. When the axial fans are at a standstill, the angle of attack can be continuously adjusted. The high-quality housing as well as the impellers and blades are permanently resistant to corrosion.
All axial fans of the basic series can be delivered directly from us in the versions presented here.Our stocks are constantly being adapted to the growing requirements of our customers. For the delivery of special fans with special requirements, simply contact us. Here, too, we meet all customer requests as quickly as possible. With DLK you can rely on the highest and most reliable quality.
With many years of experience as a manufacturer and on the basis of the latest ventilation technology, DLK develops centrifugal fans for use in areas where particular efficiency is required when increasing pressure in relation to the amount of air. The centrifugal fan can be adapted particularly well to many special requirements. With the wide range of our centrifugal fans, a particularly large number of different areas of application can be covered.
We offer fans with backward curved blades from our range. Depending on the design and series, our basic range includes centrifugal fans with and without housing.With our basic series for centrifugal fans you can choose between the versions of the fans with direct drive for the blower, with belt drive and the version built-in fan with direct drive.
All centrifugal fans we manufacture have the required certifications. You can order the series of the standardized programs listed here directly from us. With us, production and stocks are optimally adapted to market requirements for all products. If you would like special fans, please contact us and let us know your order requirements. Even if you would like to order specific special designs, we endeavor to supply our customers as quickly as possible.
Founded
1974
Employees
50 - 100
Certifications
Schöntal-Berlichingen
Germany - 74214
DMAG GmbH sees itself primarily as a manufacturing specialist in the field of welding technology. We are able to serve our customers' inquiries flexibly and in a customer-oriented manner. It does not matter whether we work in the field of contract work or manufacture welding assemblies with the use of materials.
Based on our experience, we are able to manufacture welding assemblies of a wide variety of materials and thus represent our portfolio in a quality-appropriate manner.
Founded
2020
Employees
< 5
Certifications
Freudenberg
Germany - 57258
Founded
2009/2016
Employees
> 1000
Certifications
Wenden
Germany - 57482
At DM Wheel Systems we focus on wheel systems. We want to take care of our customers by taking over a part of their supply chain. Let us take the risk with our specialty, so that you (our customers) can focus on their core activities and can distinguish themselves more in their core business. This delivers good results and creates a win/win situation. In our opinion, the European manufacturing industry has the greatest future if partnerships are built. A long-term vision is crucial in this process. We are looking forward accepting this challenge together with you under the motto "Together we are strong".
What does this ‘taking care’ mean? For example, supplying shafts for drive systems of the wheels, or making a total construction, which also includes wheels. With our new advanced machine park, we can make the difference for you. We look at the total cost of ownership! Challenge us and we will show you how much money you can save.
About us
At DM Wheel Systems we focus on wheel systems. We want to take care of our customers by taking over a part of their supply chain. Let us take the risk with our specialty, so that you (our customers) can focus on their core activities and can distinguish themselves more in their core business. This delivers good results and creates a win/win situation. In our opinion, the European manufacturing industry has the greatest future if partnerships are built. A long-term vision is crucial in this process. We are looking forward accepting this challenge together with you under the motto "Together we are strong".
What does this ‘taking care’ mean? For example, supplying shafts for drive systems of the wheels, or making a total construction, which also includes wheels. With our new advanced machine park, we can make the difference for you. We look at the total cost of ownership! Challenge us and we will show you how much money you can save.
w.jpg 9msf020718-liggend.jpg
Just to be clear, let us give a short explanation of what we mean by "total cost of ownership". The total cost of ownership is the total costs for owning a product or using a service during the life cycle or cycle of use. Besides the purchase price of the product, the total cost of ownership also includes all costs from the moment of purchase until the moment the product is released. Calculating the total cost of ownership might be a way to determine the product costs before and after the process and compare them to each other. This is not only a price comparison but gives a better idea of what advantages can be achieved when working together.
Costs being part of the total cost of ownership:
Maintenance costs
Depreciation
Repair costs
Insurances
Licensing costs
Guarantees and certifications
Costs for training and education
Financing costs
Taxes
Personnel costs
Management costs
Fuel costs
Electricity costs
Costs of risks such as failure / downtime and associated precautionary measures
Security costs
Distribution costs
Housing costs / storage costs
Research costs
Discharge costs or disposal costs
Opportunity costs
Now, so many years later, we can say that we are ready for the future. We have heavily invested in our machine park to enable DM Wheel Systems to hold a strong position in the industrial market, now and in the future. Different robots, shuttles and machines on computer-controlled lathes are being used. This way, our productivity per day rises with an overhead that is as low as possible. This in combination with an advanced computer system and well-trained colleagues ensures that we are confident towards the future.
Founded
1951
Employees
50 - 100
Certifications
Boxtel
Netherlands - 5281RE
The D & N Kraftwerk GmbH manufactures and supplies for nearly 20 years, both on the basis of framework contracts as well as informally chosen projects piping and equipment for gas turbines. Here we are active both in the new plant, as well as in the service area.
Our activities range from the production of pipes and the procurement of components on their (possibly seaworthy) packaging to Kanlog message or the worldwide shipping on their own.
The range of processed materials we range from simple carbon steel via heat resistant steels as 16Mo3 and CrMo-alloyed steels up to austenitic 1.4571 and comparable materials, as well as their counterparts from the ANSI range.
We manufacture according to the current regulations such as EN13480, PED and ASME in the nominal size range from DN8 to DN2000.
Founded
1993
Employees
50 - 100
Certifications
Berlin
Germany - 12681
DOGA is an automotive supplier, specialized in developing and manufacturing a variety of sheet-metal parts using a machine press, stamping press or fine blanking as well as assemblies of spot welding and CO2.
DOGA has a wide range of machinery that allows us to work with a great diversification of products within the automotive and in other sectors like industry and electric home appliances. This diversification has contributed a deep knowledge in the treatment of different materials like aluminum, stainless steel, inox-cooper, high strength steel, etc…
We work in simultaneous engineering with our customers as a supplier for development of complex parts and welded assemblies.
Our toolmakers specialists allows us to offer a trustworthy and agile service in the quotation and construction of dies.
Founded
1958
Employees
500 - 1000
Certifications
Abrera
Spain - 08630
Founded
Employees
Certifications
Abrera
Spain - 08630
Founded
2016
Employees
5 - 10
Certifications
BURSA
Turkey - 16180
From sheet metal processing using the latest CNC controlled processing technology to conventional locksmithing.
With experience of over 50 years, today is the third generation of the innovative family-owned company for stability and continuity in the market.
Today's business of the Doll Metall GmbH comprises the range of metal processing with special emphasis in the areas of sheet metal processing, steel processing and steel construction.
We offer:
- Punching / nibbling
- Laser cutting
- Water jet cutting
- Flanging edge to 6500mm
- Cutting up to 6000mm
- Welding Working with Approvals 1800/7 and 1090
- A rich material warehouse for fast response
- And much more.
Founded
1949
Employees
20 - 50
Certifications
Sasbach
Germany - 77880
Would you like to know which suppliers are ideally suited to your requirements?
Register now and submit your request.
Founded
Employees
50 - 100
Certifications
Vicopisano
Italy - 56010
Engineering, milling small series and mass production, custom,
Reproductions and repair of pre-war vintage car parts and pre-war classic cars.
Module assembly
Founded
2010
Employees
< 5
Certifications
Munderkingen
Germany - 89597
The company Döpke metal goods and loading needs GmbH is divided into
5 competency areas:
1.Rohrverarbeitung
2.Blechverarbeitung
3.Drahtverarbeitung
4.Pulverbeschichtung
5.Ladenbedarfs-u.Lichttech.-Gross
trade (STORE LIGHTS *)
Enjoy contemporary production methods, such as
about Paternoster material connection
on and the laser-cut system or power
Free on the powder coating area,
let Döpke, flat at the same time
Administrative structure, to an award-
cheap, reliable and competent
Job shoppers and Parter grow.
Founded
1974
Employees
20 - 50
Certifications
Bünde
Germany - 32257
Founded
Employees
Certifications
Essenbach
Germany - 84051
Tradition and competence - DORNIEDEN GMBH
PLANT ENGINEERING.
Founded
Employees
50 - 100
Certifications
Billerbeck
Germany - 48727
Find the ideal supplier in just 1 minute
Communicate directly with buyers
Unique market price comparison to realize the best prices
Existing processes, systems and suppliers can be easily integrated.
Buyers use the platform completely free of charge