Our company, which started with five dedicated professionals as a partnership in 1997 counts, now a team of 65 experienced employees. The step in the new century we did with the Commissioning our new production hall, the in 2002 was followed by an extension. In our innovative operational quality is a top priority and implemented a secure know-how responsibly. With us the Tatrkraft of the expert, the flexibility and dedication of every employee counts.

We are suppliers for industry and trade. Our manufacturing capabilities are: CNC plasma cutting, sawing, punching, drilling, tapping, turning, welding MIG MAG TIG ... Products: Weldments and Parts according to customer requirements in the areas of steel construction, mechanical engineering and special engineering such as machine frames, machine frames, steel structures, consoles, construction from waste water technology and water treatment etc. We mainly steel and stainless steel. CNC - plasma cutting: * Up to 30mm thickness * Available in steel and stainless steel * Cutting range max. 3000 x 1500 mm * Blanks (also possible cuts by argon-hydrogen) by means of technical gases for optimum cutting quality * Programming in accordance with templates and sketches * Reading drawings in DXF - format Stamping, conventional: * Steel up to 40mm diameter 20mm in thickness * Stainless steel Diameter 24mm to 15mm in thickness Drilling, tapping: * Drilling up to diam.35mm * Tapping up to M20 Turning, conventional: (Clamped inside) * Max workpiece diameter D = 600mm * Maximum workpiece diameter D = 300mm (outside cocked) Saws: * Round up to diameter 240mm * Flat to 300mm width Welding: * MIG / MAG * Component manufacture according to drawing * Maximum part weight: 500Kg

Manufacturing and service program: Construction, retail manufacturing, mass production of steel components, stainless steel components, light metal components and their assembly and repair. Manual operations in the wage. Small steel construction Customer structure: Automotive supplier industry, housing and construction companies, architects, local authorities, craftsmen, private customers

The Schäfer GmbH is a specialist in the area of the bearing, linear, power transmission and conveyor systems. We also supply standard and special parts made of plastic. We supply engineering companies throughout Germany with parts in the areas of bearings, driving and conveying. With subsidiaries in Austria and Switzerland, we are close to our customers in these markets. In addition to pure commercial products we manufacture conveyor belts and flat belts and configure or build complete conveyor systems. In our production range gearing parts produce as timing belts and pulleys, chains and helical gears as well as flat and ribbed discs. Our comprehensive range of tools allows us to produce all the profiles and geometries. In addition, we are not restricted in the choice of material and produce for our customers Verzahungsteile in steel, stainless steel, aluminum and plastic self. Thus, we offer maximum flexibility and short-term reaction or production times. We welcome your inquiries. Sincerely, Markus Schäfer

The Urben and Kyburz AG is a company of machining, mechanical industry. As a manufacturer of high precision components in the medium-and large-series range, the company supplies an internationally very demanding clientele. With 120 employees and a modern machine, we offer a complete, cutting, machining in medium-and large-series range. What procedures are offered? CNC turning, precision turning, hard turning, CNC milling and drilling, grinding (outside, inside, centerless, honing, polishing, lapping, center, trowallisieren), brushes and spaces. For heat treatments, we work with qualified partners. Which part dimensions we? Everything what you still need neither a magnifying glass, a crane! Expressed in figures, this means: Rotational parts: 10 mm - 250 mm in diameter and a maximum length of 600mm. Cubic parts: up to max. 200 x 250 x 300 mm What precision do we offer? Highest precision is and has always been the great strength of Urben + Kyburz AG. With highly motivated and dedicated employees and the appropriate resources, we produce daily precision parts in the micro-region of all common materials.

The SLR MetallbearbeitungsgesmbH, based in the year 1990, was taken over by SLR Gusswerk II BetriebsgesmbH as one-hundred-percent subsidiary factory in 1997. Since 1990 the SLR-MetallbearbeitungsgesmbH machines cast parts for SLR Gusswerk II BetriebsgesmbH by modern manufacturing machines. These cast parts are for the vehicle industry with high quality standard. Certification: ISO9001 Production of: CNC turning and milling turning workpiece milling parts contract manufacture of series production part assembly of component assembly for middle and high volume vertical turning and boring mill precision turned parts Products for: Drive and gear components Construction equipment Utility vehicles and agricultural vehicles Railroads, machine tool industry Hydraulic industry Materials: processing of all current metallic materials Machines: 11 processing center 7 CNC-lathes 3 3D-measuring machines 1 Broaching machine

The FLAMMMOTEC GmbH & Co. KG was founded (formerly STAN DRAWING, since 1954) 1993. We manufacture in the works of Berlin and Nauen stamped and drawn parts, primarily for the automotive, white goods and electronics industries, primarily in the United series. Other strengths lie in the field of manufacturing of components. We specialize in die-castings of medium size to large stampings (pressing force of up to 16,000 kN). Our stamping presses and transfer presses have table sizes up to 5200 x 2300 mm. The manufactured parts have up to 13 kg in weight and up to 1 m². In addition, welded assemblies are produced on a modern 6-axis welding robots (1 m³ action space, part weight up to 1000 kg) and spot welding machines. Production Our parts range covers all types of forged parts in all grades of material from small parts up to parts of approximately 1 m². For years we have specialized in the field of deformation of aluminum and stainless steel sheets (also in sandwich construction). In our pressing plant single, progressive or transfer dies are used up to a weight of 25 t. There are automatic punching machine with a printing speed 1000-16000 kN and a table size of up to 5200 x 2300 mm. There are additional single presses with a pressure capacity up to 6300 kN in use. For the production of sandwich parts (especially shielding plates made of stainless steel) is a 8000-kN large-scale press. On our punching machines are used to coil up to a width of 1200 mm and a plate thickness up to 5 mm, depending on the section that process. We are predestined for assemblies, ie. For the implementation of welded structures with six-axis welding robots and automatic joining of nuts and bolts In order to achieve an optimization of the work, we have assembly, placement and spot welding machines in use. By working closely with our partners, we are able to also surface coatings and galvanizing on grafts from powder coatings to cathodic dip coating offer. Logistics As a supplier with world-resident customers, we measure the Logistics Management utmost importance. As requested, we deliver just in time and place value on adherence to your requirements in terms of delivery quantity and packaging. Here we support a modern, always with the latest requirements customized IT technology. Our logistics department handles your incoming EDI, Internet or fax calls immediately and ensures that production, storage and shipping can implement your requirements promptly and respond to your needs. We work together on request as specified by you or by us carriers commissioned reliable partners and respond quickly and flexibly when difficulties arise. Toolmaking Our tool guarantees us a high degree of flexibility for changes and remakes of assemblies to customer specifications. It is an important partner of our pressing plant because downtime is minimized through him. Through close contact with our production, the tools are optimized in the short term. Preventive servicing and maintenance are an important prerequisite for safe production. 20 toolmaker / maintenance have three layers in use.

We are a small private company in Slovenia. Specialized in the manufacture of machinery for the construction, agricultural and industrial machinery and manufacturing machinery for woodworking.

DVF SCREW is a family business growing, located in the heart of the Vallée de l'Arve (Haute-Savoie) for over twenty-five years. Specializes in turning small, medium and large series (maximum capacity 28mm) in various materials such as aluminum, brass, standard steel, non-alloy steel, plastic (PA6-6, Teflon, Nylon, POM) or stainless steel 303.304 L, 316L ... Its fleet technical and diversified machinery enables the realization of simple parts or complex finished parts on machines. DVF decolletage is certified ISO9001 2008 version by TÜV SUD. The industries are furniture, computers, automotive, cycle, agricultural, medical, aerospace or weapons. Periods of rapid responses and listening to its customers demonstrate professionalism in their work. DVF SCREW is a dynamic structure. We are at your disposal to all requests. Translation by Google Translate

We are a young and ambitious company that is steadily since 1999 growth. In our new workshops tailored systems that exactly match the individual requirements of our customers arise. On most modern CAD workstations and CNC machines we put your wishes fachgrecht. Our Strengths - Your Benefits Everything from one source Our strengths - Development, design and manufacture of special machines, production parts and prototypes - Own production of necessary resources, such as clamping and mounting devices - Edit the components on CNC machines - Procurement of purchased parts - Complete assembly of components / assemblies - Delivery Your advantage - Complete systems from a single source - Professional solution to your problem - Wirtschafltiche prices - Fast turnaround time - Very high flexibility - Druchgängiges quality concept

The company was founded under the name SchwarzTEC SHS (blacksmith trade Black) in December 2009 and led to June 2011 as a pure online trading for wrought products. In June 2011, the Assembly service S + F that was added to and carried out installation work of all kinds. In January 2013, the company was renamed SchwarzTec and took over the company Elektro Radio honey in Titisee-Neustadt am 01.02.2013 and integrated into the company SchwarzTEC. The main tasks of the company are SchwarzTEC. Electrical installations, control panel, customer service, repairs and installation work of all kinds, and metal works, and trade in electrical and metal goods. Our focus is at the moment in electrical engineering, but are currently under construction of the metal area and looking for jobs in the field of steel construction / engineering, whether welding, bending, drilling, punching, shearing, sawing and assembling, we are equipped and able to produce a wide variety of components . We would be pleased as you can to help the supplier on. Your company SchwarzTEC

BMS GmbH ,,, Blech und Metalltechnik Schreiber Medium-sized family company manufactures complete assemblies, fixtures, welded parts, mechanical production, machine enclosures including assembly, including powder coating. Construction in the house.

Briefly about RiWo-Gesamt: We have our production facilities in Austria, Croatia and Bosnia. Organization, assembly, quality assurance, etc., is controlled and monitored in and from Austria, QA and assembly. Croatia: welding, milling, turning - LG1 Bosnia: From 100 pieces. Turning, milling, edge - welding.

I am a mechanical engineer and live abroad. Here the service is very cheap for you. Just tell me your wishes and let me treat you cheap with perfect quality for you.