By using state-of-the-art machines for CNC milling and CNC turning, with optimal production control and uncompromising quality assurance, we also meet the highest requirements of various industries. Company z. B. the chemical and food industry, mechanical engineering and currently also the aviation industry appreciate the quality of Jung & Co. Our range of services is also available to you.

We are a specialized company in the field of machining technology.
Our production area covers all metals and plastics up to special materials such as Hastelloy, Monel or Titan.
We see ourselves as a complete supplier to our customers including coatings, special operations and service in the area of special packaging, logistics or just-in-time processing.
Our own claim is quality at the highest level, if you don't believe this, you can convince yourself of it on site.

My TEAM and I look forward to your inquiries and hope to be a reliable partner for the future.

Machines and systems for rebar processing
Service partner for EVG machines

Purchase and sale of machines for probation steel processing
Manufacture of logistics systems
as well as, planning of production sites

SINCE 2009 ....

The company was founded in 2009 by Mrs. Bettina Landgraf-Kaiser, storage capacity today is about 3000 m² in three halls. As a leading warehouse distributors constantly about 100 cars and well-preserved machines of best brands offered.
State of the art warehouses with crane capacity up to 10 tons and forklift capacities up to 7 and highly trained staff are the benefits for potential customers to find the "perfect machine". Complete "all-inclusive" packages (eg transport, introduction, installation Complete training) are developed and implemented according to your.

MEMBER OF:
Since 2009 FDM - Germany
Since 2009 EAMTM - Brussels (International)

SPECIALITY: Cutting metal-working machines
Our specialty is the trade used machines from metal cutting. Whether conventional or CNC - controlled, we each offer the right machine for you.In CNC - area we act almost exclusively with the control type Fanuc & Heidenhain. Here we can give you the best - provide service, whether coverage with qualified staff, service staff or software solutions.

OTHER:
Furthermore, even spare parts - remakes produced directly in the house with us. Through years of experience of our employees in the cutting process on Fanuc & Heidenhain controls, we can therefore offer cost effective replacement parts alternatives you.

The KAMAR-CNC company was established on the initiative of two ambitious people who spent years gaining experience as operators and machining technologists.

Working with machines allowed us to learn from the very beginning the technological process and the problems faced by today's CNC market. We know how important the timeliness, quality and precision of the details are. We deal with unit and large-series production.

We approach the tasks entrusted to us with full commitment. We strive to ensure that our services are at the highest level.
Today we are 8 people and we have 4 new CNC machines

We invite you to contact us and cooperate.
Mariusz and Kamil

Dear Ladies and Gentlemen,

in this way we would like our service companies introducing
we produce single pieces or small series, series, sub-assemblies, gauges, fixtures
Tools, special machine parts for the Varied fields of application according to your
Requirements, specifications, drawings. We can at reference customers from eg mechanical engineering, special engineering, medical, aircraft, automotive industry, tooling, etc.
References. Our range of machines includes most modern technology currently available in these areas
CNC milling, CNC turning, CNC surface grinding, CNC wire EDM, CNC sinker EDM CNC-Erodierbohren/Präzisionsbohrungen, CNC Ultra Sonic is offering.
Thanks to this modern manufacturing equipment and years of experience and a team of employees profounded
we are to be able almost all requirements in manufacturing technology needs.

For more information about our machine park can be found on our website

CNC milling, CNC turning, CNC surface grinding, CNC wire EDM, CNC sinker EDM CNC-Erodierbohren/Präzisionsbohrungen, CNC Ultrasonic

www.KaPe-erodiertechnik.de

Welcome to the Web Site of Karcoma-Armaturen

Decompression valve, pipe filter, drain cock:
Just three examples of a few of our innovative products around the engine construction.
We design, develop and manufacture fittings. This includes fuel fittings and filter elements such as pipe filters, straight-way filters or fuel filters (gasoline filters) as well as fuel cocks and drain cocks. Karcoma-Armaturen GmbH also specializes in the decompression valve, one-way restrictor and other valves such as the aeration and vent valve. Need a customized solution? We are ready to work together with you to develop a customized design for your special fuel fittings needs. From design to assembly, you are kept well informed.

We are your versatile partner for metalworking, CNC milling and CNC tool grinding in the greater Bremen area and the Oldenburger Land region. For business customers from a wide range of industries, we carry out a wide range of tasks in the area of machining technology, from individual individual orders to series production. In doing so, we attach great importance to competent advice, comprehensive services and high-quality and economical working techniques.

Our main areas of responsibility in the area of metalworking include milling and tool grinding. Here, we are able to complete your orders with the help of modern machinery, qualified specialists and many years of experience in the best quality and reliability. You can also contact us about all challenges in the area of mechanical engineering and special tools. Our expert staff will be happy to provide you with advice and assistance.

“From your drawing to to the end product! “With this route, we meet all customer requirements in a modern way.

Some areas of construction, procurement of raw materials and a very high level of vertical integration are our plus. Over decades, we have acquired many years of experience in refining the components in a wide variety of surface qualities and assembling individual components. Thanks to a large network of suppliers and service providers, we have very good economic prices and strive for very fast delivery times. This is the basis for long-term cooperation with well-known companies from a wide range of areas of mechanical and plant engineering. As a modern company, we are happy to use additional requirements in the area of processing orders for our own development.

In the Suhl/Zella-Mehlis economic area, on the southern slope of the Thuringian Forest and directly on the outskirts of Zella-Mehlis, we produce quality with the highest level of expertise, from planning to delivery.

The company's central location ensures convenient transport times and routes for both customers and suppliers.

Our customers include suppliers from the automotive sector, appliance manufacturing, the valve industry and office furniture manufacturers in Germany and abroad.

Our customers are offered everything they need within our group of companies, all in one basket: from development and project management via the production of tools for plastic and metal fabrication, through to manufacturing the parts.

In this way we closely co-operate with our customers in developing functional structural plastic and metal components on the basis of the design, thereby achieving an optimum combination between plan, design, manufacture, and cost structure.

The integrated possibilities have enabled us substantially to shorten the project run up to the point of series production. The systems Pro-engineer and Catia, available to our staff, permit the creation of structural components and tools, "in one casting" as it were.


Injection Moulds Our staff in the individual manufacturing areas have state-of-the-art technologies and most up-to-date machines (such as 12-wire and 15-wire cavity sinking EDM machines) at their disposal. In producing moulds with a guaranteed number of shots, especially for the automobile industry and consumer electronics, our dictum is precision and quality.

This holds true for injection moulds, diecasting, duroplastic, two-component, rotating, transfer and insert/outsert moulds, just as much as it does for two-colour moulds, combinations of hard and soft plastics, automatic wire leads, in-mould decoration, and precision gear wheels.

Rapid tooling with the aid of our EOS metal sintering machine M250 Extended makes it possible to produce mould inserts for injection moulds and prototype tools within a very short time.


Eighty moulding machines in Vienna and Hungary, with a clamping force of between 25 and 1,100 tons, offer all the possibilities of manufacturing moulded, thermosetting and duroplast, gas-injection moulded, two-component moulded, insert and outsert moulded, as well as in-mould decoration parts.

Our machines are equipped with automatic robot systems, and automatic packaging lines complement the production line.

Vienna: 3-shift operation / technical products and precision parts with a mould clamping force of up to 500 tons,

Hungary: 4-shift operation / technical products and design parts with a mould clamping force of up to 1,100 tons.


Your plastic parts are coated in three fully automated painting lines on a water-soluble basis (single-component or two-component coating).

Your metal parts are electrostatically painted, from the smallest parts up to housing coatings for consumer electronics.

We are a company with more than 100 employees in Velbert - the city of locks and hardware. Since 1980 we manufacture zinc die castings for various industries. Focus here is on the automotive and shop as well as sanitary, furniture lock and window fittings. Surface parts with various electroplated coatings as well as technical cast as one of our strengths.

Because we place great emphasis on intensive customer guidance in the context of product development, we can assure a cost-effective and reliable production.
A lean operating organization ensures an above-average short delivery times and a high degree of flexibility. We would be pleased to provide you with even prove our efficiency.

We are a fairly new company founded for fast prototyping in sheetmetal and welding constructions. The team includes experts from laser cutting, bending, welding MIG, TIG and other specialities. Our goal is to become the slovenian Tech center, always investing in new high grade equipment and machinery and helping Start-up companies to get their first prototypes cheap or sometimes even for free.
We have EN1090-2 and EN1090-3 Quality standards implemented.

Welcome to K + F Metalltechnik GmbH & Co. KG

— K+F products are tested in accordance with EC guidelines, national and international standards
— For over 30 years, we have been manufacturing quality products in our production facilities, which are designed according to the latest production guidelines
— Every employee sees himself as part of the system and is constantly working on its optimization
— Pioneering innovations and investments mean progress
— This is the only way we can achieve a high standard of quality that ensures the full satisfaction of our customers

Since 1969, we have been your reliable partner for CNC machining services. With a team of 20 employees, we offer high-precision turning and milling work for various industries.

Our focus is on quality and customer satisfaction. Contact us to find out how we can meet your manufacturing needs.

At Klas Metal we have been working in the field of metal production for more than 30 years. The wealth of experience we have accumulated so far provides us with necessary skills and an abundance of knowledge, which ensures professionalism of our work.

We are a family business that has been - since our founding in 1983 - devoted to the manufacture of metal products made of welded sheet metal, aluminum and stainless steel. Over the years we have expanded our offer and added other services, such as stamping inserts, powder coating, welding, laser welding and laser printing. Today we provide a comprehensive service in the field of metal processing and production.

Stamping and forming technology
Toolmaking
Assembly production

Stainless Steel - centrifugal casting Herststeller
The company was founded in 1960 by Klaus Kuhn, and was designed from the beginning to the production of stainless steel rotationsverdichtetem.



Core element of the high quality of our Kuhn-stainless steel is the centrifugal casting process, which is constantly being developed by the company. The alloy spectrum is virtually unlimited and is continuously adapted to the needs of our customers. It will be made on medium-and high-alloy chromium-chromium-nickel steels, down to the iron-free nickel-and cobalt-based alloys standard and special alloys of cast iron (Ni-resist) and cast steel.



Klaus Kuhn made according to your design specifications.
The finishing is our strength. The extensive production of our mechanical processing (conventional lathes, CNC machines, machining centers, large lathes, boring lathes, etc.) allow us to use our products in a variety of industries around the world, all from one source.



Dimensional ranges / Key Facts:

max. Outer diameter = 1500 mm

min. Outer diameter = 56mm

max. Coating weight = 5to depending on the wall

We are a small company in the heart of the Rhön our specialty is the production of waves of all kinds of diameter 12-360mm and a length up to 1590mm, turned parts up to diameter 450mm, external cylindrical grinding from 10 to 350mm and a length up to 1600mm at a max. Workpiece weight of 500kg. Single and series production

Materials:
We process steel, stainless steel and cast iron and aluminum

Delivery program:
Shafts, pistons, bushings, rings, discs, shafts, pulleys, housings, hubs, coupling flanges, spindles, drive shafts, shaft, pistons, jack, wheel, axle, pulley, hub, spindle, drive shaft, turned parts, external grinding, milling parts, lathe parts, automatic turned parts, galettes, shaft supplier, supplier shaft, shaft supplier, hollow shafts, solid shafts