We say: Technology, quality and innovation - all together!

And, above all, the enthusiasm with which our employees manufacture all products so that we can meet your high demands for turned and milled parts and assemblies.

The success story of METUSAN TURNING GmbH began in Vienna in 1906.

The Dvorak family company builds on a wealth of experience - after all, we have been Austria's largest producer in the field of non-ferrous metal processing for many years.

Perfect industrialization knowledge combined with modern production technologies lead to the highest precision.

Translated with DeepL.com (free version)

Metz automotive is active in the fields of

- machining
- tube machining
- stamping
- tooling and fixturing.

With our highly motivated staff, we are able to react quickly and individually to customer inquiries.

Metzler GmbH & Co. KG - Intelligent Solutions in Metal

Our core competencies:

- Soldering
- Heat treatment
- Pipe Bending
- Sheet Metal Fabrication

Our key services:
- Soldering
- Brazing
- High temperature soldering
- Magnetic final annealing
- Annealing
- Stress-
- 3D-bending
- Free-form bending
- Boosting
- Laser Cutting
- Edge
- Bending of metal plate
- Rolling
- Welding
- Förderner fluid piping systems
- Line systems
- Automotive

MEUSELWITZ CAST is today with the most modern foundry plants in one hand and Großformerei and a mechanized Anlagenformerei castings high dimensional accuracy and surface quality in furan resin molding process up to 65 t piece weight here. In the years 1993-2005 € 30 million was invested in the modernization and expansion of hand molding. We advise our clients during the design phase so that they can interpret their structural parts optimal for the casting process. The casting of each part according to the guidelines and inspection requirements of the Arbeitsgemeinschaft eV quality cast iron guarantees our customers a high quality. FERRO CAST ® is the trade name for cast products that are manufactured and sold by the foundries ASSOCIATION OF QUALITY CAST. These castings can be recognized by the cast-Q.



300 skilled and motivated staff ensure a production volume of 35 000 tonnes and 80 million € turnover per year.



In addition, we cooperate for the processing of your castings to mount just finished parts, assemblies, and final products.

MEVACO being a member of the Athens stock exchange is a leading manufacturing firm which implements state-of-the-art technology in the field of metal fabrication and metal construction, conforming to the principle that total customer satisfaction is of highest priority.

When it comes to sheet metal fabrication processes, whether carbon steel, stainless steel or aluminum, MEVACO, having experience in the field for over 40 years strives to be the industry leader. Our customers depend on us to produce high quality and high precision custom products. Our staff of highly trained and engineers and technicians are flexible and highly motivated.

Our state-of-the-art metal fabrication equipment and sophisticated manufacturing technologies coupled with an abundant industrial floor space enable us to fabricate almost any type and size of metal product, strictly based on the customers quality and quantity requirements.

Mevaco not only invests in fabrication technologies and machinery but firmly believes our success stems from the philosophy of personnel investment. Our self-motivated experienced and energetic staff adjusts to almost any degree of difficulty and can yield desired results within a minimum response time. We make the best use of leading edge computerized hardware and software and our staff is constantly trained and up to date with emerging technologies within the field. We can fabricate to almost any order quantity and to any quality level as desired by the customer.


We keep our equipment up-to-date and our staff trained and highly-motivated and content, this we believe is what sets Mevaco as a leader in metal fabrication and metal construction.

Welcome to MEVI-CZ! Are you looking for a professional and reliable partner to manufacture your components or assembly your modules? Whether you are dealing with an technically complex issue or simply you want to have the job done correctly, we can manufacture it for you. And should an extra, specific link in the chain be necessary, for instance to create a special finish, we’ve got the right – reliable – partners to deal with that aspect.

We are a custom machined parts manufacturer.

Mewatec Mechanische Werkstatt & Technologie e.K. is a company specialized in mechanical manufacturing and processing technologies. The range of services includes ECM processing, turning, milling, CAD designs and the processing of fiber composites. Mewatec offers tailor-made solutions for various industrial applications, including fire gas fans and turbine construction. The company is known for its high precision and innovative strength in mechanical processing and construction technology.

The MEWEKA GmbH was founded in 1990 by Karl Storf and has about 25 employees in the areas of contract manufacturing and assembly works.


Contract Manufacturing:
After initially only milling, drilling and turning operations were done, were added gradually the production areas surface, profile and cylindrical grinding and wire and spark erosion.
This modern manufacturing processes and high efficiency ensure a consistent, high quality, even for complex products. With maximum flexibility, we also achieve the shortest response times.
For further manufacturing processes such as heat treatment and coating are our longstanding and competent partner.

Individual and series parts
Parts directly for the automotive industry, eg for racing
Parts for the aerospace industry

This materials used:
Non-ferrous metals, such as aluminum, brass
Plastics
Steel
Carbide
Special materials such as heavy metals


Assembly:
In the assembly, we offer our customers the opportunity to finished assemblies including parts production to relate with us. This is a clear area of responsibility is deferred.

Complete assemblies for mechanical engineering
Jigs and fixtures
Construction of tools
Repair and manufacture of tools (including other manufacturers).


We are your partner on whom you can rely on!

The company Mey & Andres GmbH in Bremen area one of the largest middle-wage manufacturing company that has specialized since its foundation in 1984 in the areas of complex CNC machining and construction of the device.

We have a modern equipped machine tools and equipment fleet
5-axis CNC and conventional machining area. Our product depth covers series to sophisticated single-part production.

The 5,500 m² base area of the production halls spread 42 machining centers in the areas of work drilling turning and milling technology.

Well-trained workers have the necessary "know-how" to meet the high quality requirements of our customers.

Steel processing
The steel processing is one of our specialties. From blank to finished product, it put our strengths. Up to a length of 4000 mm we can process steel parts.On our 5-axis machines, the processing is fast and inexpensive, which of course benefits the customer. For us it is important that the customer is satisfied with our supplied parts so that customer-supplier relationship is true. Whether individual parts, small series or larger quantities, with our extensive range of machinery, which leaves nothing to be desired production, we can satisfy every customer.

Stainless steel machining
Stainless steel is a generic term for those types of steel were melted in a special procedure (secondary metallurgy) have high degree of purity and respond uniformly to the intended heat treatment. After the chemical composition is between mild (steel group numbers 10-18) and alloy (steel group numbers 20-89) to distinguish stainless steel (DIN EN 10 020). In accordance with its intended use are divided into civil, mechanical, container, tool, quick labor, bearing steels.Or they are characterized by their properties: chemical resistant, rust-proof, heat-resistant, high temperature resistant, weldable steels, steels with special physical or magnetic properties or specific yield.

Aluminum machining
A light metal, which is the most common metal used in addition to tinplate. Aluminum is a recyclable friendly packaging material, the collection and recycling rates have risen through the work of the dual system. Very frequently there is aluminum in compounds with other packaging materials. With the eddy current separation to aluminum-containing material can now be easily separated from the rest of used sales packaging. Aluminium can be recycled any number of times and with virtually no loss of quality. For melting of aluminum is up to 95 percent less energy than for the primary production.

Turning
Among the common on lathes grips, such as two-three-and four-jaw chuck, chuck jaws, face plates, including rotating devices for special purposes.A variety of products can be produced on our machines, so no specific requests regarding the processing remain open.
Various products are in our production range, which are used across all industries. The customer gets from our company precisely manufactured and delivered the product, which corresponds to its requirements and demands.

Assembly
Assembly is a manufacturing area in which our company can meet the complex needs of customers. The customer gets complete assemblies, where he can be sure that the quality is right.
This is just a small selection of complex assemblies that we manufacture for various clients. Of course, we are always willing to devote ourselves to your ne...

ROTATE - HARDENING - MILLING - GRINDING - ASSEMBLY

• Full service - all from one source

• Our Technology - Your Advantage

• Certification - Gated quality

• Fresh ideas - innovation since 1994



Full service - all from one source!

The Meyer rotation GmbH in Marienberg / Saxony is a medium-sized family with about 110 employees.

By turning, milling, HARDENING, grinding, assembly and use of the latest technology and innovative know-how, we produce complex precision turned parts from all machinable materials.

We focus on customer orientation and in this way secure the success and long-term positive development of the company. Based on the wide range of services and products and in compliance with the quality and delivery parameters of standards in the development of the rotary Meyer GmbH Marienberg be set.
An individual customer service is important to us.

These factors create trust and strengthen customer loyalty since the founding of our company.


Precision Products - Quality in every detail!

Our high-quality machinery and measuring technology enable the production of highly accurate precision turning parts, regardless of difficulty and material.

The combination of faster, more economical CNC technology with the advantages of cam-controlled automatic lathes ensures the production in medium and large batch sizes.

We can process all machinable metals, such as aluminum, steel, brass and bronze rods with diameters ranging from 5 to 90 mm.

The range of manufactured products ranging from individual parts, completely mounted assemblies to finished end products.

No limits
Powder metallurgy offers practically unlimited possibilities in terms of form and specific caracteristics. In most cases, parts are ready to be installed right after the sintering process. However, they can undergo secondary operations without any problem.

Heavy metal components – our specialty since 1949
The sintering technique is ideally suited for heavy metal parts, hardly feasable by any other conventional procedure. To this end, we use our special alloy RECONIT®.

PorS® filtering elements made of bronze
For bronze filtering elements made of (Sint AF50), we use powder with spherical particles. The powder is poured into special moulds and sintered. The filters are exactly adapted to meet specific requirements regarding filtering and flow-through characteristics by means of varying wall thickness and grain size.

PorS® filtering elements made of chrome-nickel steel
For stainless chrome-nickel steel (Sint AF40) filtering elements,we use powder with sputtered particles of irregular shape, compacted and then sintered. The filters are exactly adapted to meet specific requirements regarding filtering and flow characteristics by means of varying wall thickness and grain size.

PorSilent® silencers – a quality concept
Our PorSilent® high quality silencers are successfully used worldwide. Our customers appreciate the important choice and the top quality of these products.

Innovative and reliable service from the Hannover region for product development,
Rapid prototyping, laser sintering, small batch production and CNC machining

further information about MFD - Kunststofftech GmbH: https://www.mfd-gmbh.de/


Since its founding in 2003 MFD can look back on a steady growth. Today the production development is adjacent to the laser sintering, rapid prototyping and contract manufacturing of prototype parts and small series, the service portfolio.

In the district of Hanover, you have a team of designers, product developers, sample and prototype builders and precision engineering and metal cutting available. Thus MFD has in each production area with a high level of expertise and due to the high level of vertical integration, even time-consuming and complex tasks to offer cost-effective.

Whether. As rapid prototyping service provider for 3D printing and laser sintering components, as small batch manufacturer for plastic components, or as a system provider for product development, prototyping and serializationMFD finds a solution for every requirement.

Through a detailed order planning and specialization in prototypes and small series short delivery times can always be offered, in Rapid Prototyping and prototype delivery times are sometimes a few working days realized.
.
MFD supports its customers from the idea of a plastic article through the prototype to small series production of several thousand components as competent partner
and would be as an innovative company on new tasks.

We are a model making operation from the Hannover Region
and took us to the production of prototypes
and small series of specialized plastic and aluminum.

We offer our customers:

tool-oriented design products according to customer specifications
for low pressure, injection molding, and Druckgußartikel
CAD modeling with Catia V5
Model and prototype
Rapid Prototyping
Tool and mold for injection molding, - and deep drawing products
Mold plastic
(Cost-effective tools for small series)
Small batch production (1 .. 5000 pcs)
Plastics Processing
Series production of injection molding and thermoforming articles
CNC milling up to 950x650x250 mm wage

Our customers include well-known companies from
the electrical, medical, automotive supply industry and the engineering industry.

Welcome at KARG - Wire Technology
M. F. KARG GmbH belongs to the internationally leading companies in "Technical Knitted Wire Mesh u. Networks as well as the wire - stranding technology. Continuous product development after the principles of the IATF16949 and efficient tools- and mechanical engineering make us since 1960 the innovative partner of our customers from the trendsetting industries automotive engineering (Airbag, Exhaust Systems, Fuel Cell...), environmental and process engineering, energy engineering as well as general machines and equipment construction.
 Technical Knitted Wire Mesh and networks
 Airbag components
 Components for exhaust systems
 Decouple units
 Vibration dampers
 Demisters / Mist collectors
 Filters
 Bunching / stranding machines
 Stranding technology and accessories
 Development and technical support

MF-Zerspanungstechnik was founded on 01.12.2015 in Gondelsheim. The company's range of services includes the production of metal parts made mainly of non-rusting steel alloys. Non-ferrous metals, steel alloys, plastics and aluminum can also be processed. Said metal parts are produced on a CNC automatic lathe, a modern Mazak Quick TurnNexus 250 II MSYx500.

Where others stop, we're in great shape!
MGB has long been a fixture in things mechanical machining of large parts.

With around 40 employees and modern machinery, we offer the entire spectrum in Germany in the area milling and drilling. In addition to our expertise, our customers appreciate our absolute punctuality and flexibility.

Sourcing CNC components