The company ST Stamping Technology GmbH, founded in 1977, is now a renowned company in the field of metal forming.

With now more than 170 employees, we have accepted the permanent challenges of rapid technological change.
Our customers in the automotive industry and many other industries appreciate us as a competent and reliable partner.

Business philosophy:

As part of the supply chain, our mission is to create synergies between stakeholders and to use, with the aim of continuous product improvement.
We are convinced that only the competent and fair wholesale service for the business partner can be the basis for their own success.
This principle applies within our team, as well as in the relationship with our customers and suppliers.

Stumpp + Schüle GmbH, founded in 1934, is working in the field of development and production of technical springs, bending parts (wire and strip material), stamped parts and assemblies.
The company belongs to the Swedish Group of Lesjöfors AB, which provides spring solutions worldwide using its network of more than 30 subsidiaries.

Stumpp + Schüle employs more than 200 people in Beuren (Germany) and Nové Zámky (Slovakia) and is one of the leading companies in the German spring industry.

With the Automotive sector forming a big part of our current business, high quality standards and reliable customer care characterize our company.
Our special strength lies within the development and production of individual technical springs in co-operation with our customers which are at the center of our activities.

Within our own tool shops we produce prototype and serial tools for the production of prototype batches, small series and large series reaching up to several million parts per year.

We mainly supply our products to customers in the Automotive and Electrical industry, as well as into sectors like Aerospace, mechanical engineering, textile and energy industry. Customer support and Key Account Management are managed by our headquarters in Beuren (Germany).

Sturm Blechverarbeitung & Systeme GmbH
Much more than just only sheet steel processing - high-tech sheet steel job order production
We – the commited and competent team of the company Sturm Blechverarbeitung & Systeme – ensure guaranteed quality and precision for production and processing of laser cut and laser punched parts. We not only offer job order production of prototypes in large quantities, but are at the same time systems suppliers for punctual delivery of series components and complete component groups “just in time”.
Modern job order production
The concept of the Sturm job order production in our own high-tech machining centres easily makes it possible to use our technical know-how for all production steps and segments.
Job order production = a worthwhile service for you
Guarantees highest quality and optimum time management
Our technology – use of most modern techniques
7 laser cutting installations, 1 laser cutting and punching installation with automatic production sequence, 8 CNC-mechanical press brakes, welding WIG, MIG, MAG, welding robots
The product - simple sheet cutting as well as complex sheet devices
max. dimension: 4.000 x 2.500 mm maximum thicknesses: steel 1 – 20 mm, stainless steel: 1 – 20 mm, aluminium: 1 – 12 mm

The flexibility
approx. 1.000 t steel and stainless steel sheets available ex stock for shortest possible delivery times, most efficient production, further processing possibilities

Tool - Machines - Plant Engineering
Turning - Milling - Grinding
Engineering Services

Your partner in mechanical subcontracting

We offer a subcontracting service for mechanical components and assembled machines,
in which, starting from the customer's project, we study its industrialization, we identify the most suitable production process, we rely on the most suitable suppliers for each individual production phase.

We manufacture, as a contract manufacturer, in Straelen on the Lower Rhine, drilling, turning and milling parts made of steel, stainless steel, aluminum and copper alloys as well as the most common plastics. We have also gained some experience with titanium machining.



Adherence to deadlines, quality and customer satisfaction are our top priorities.

If you need parts for general mechanical engineering and are interested in our work, please contact us.

On request, we will also be happy to prepare a test report for you according to specifications.

Together we will definitely find a solution.

Sheet metal working, metal forming, laser technology, CNC punching technology, CNC Kant technology, rounding technique, welding, surface treatment, powder coating, special sections, metal ceiling systems, grid systems, metal wall panels, design covers, corrosion protection, CS® coating, steel, aluminum, stainless steel, perforated sheets , expanded metal, decorative elements, rolled sections

As a competent and quality conscious partner, we support you both in the field of machining and in the fixture and tool.

Our range of services includes, among other things, CNC turned parts, CNC machined parts and assemblies production.
Also, assembly work and welding constructions are carried out according to your drawing specifications.

The company SUDEX machining GbR is a company in the field of contract manufacturing.

Facilities are CNC - lathes, CNC milling and turning center with bar feeder and vertical machining centers with which we can produce turned parts, milled parts in small and large series.

We process materials such as plastic, steel, stainless steel and non-ferrous metals copper, brass and aluminum.

In addition, we offer you through our partner companies, the finishing of surfaces
such as galvanizing, burnishing, chrome plating, nickel plating, powder coating and hot dip galvanizing on.

Our product range includes, forAs bushings, washers, rings, cones, tubes, shaft, axle, hub, plug pin, roll, nozzles, pins, cylindrical rollers.

Bolts, nipples, housing, sleeves, rings, adapters, handles, reducers, eccentric, fasteners, nuts, sprockets, couplings, sleeves, slide tubes, valves, tappets, connection housing, eccentric, spiral rings, nipple, couplings, valve lifters, locking sleeves, hex sockets, mixing tubes, spring washers, distribution, damping rings, clutch housing, actuating plunger, spiral discs, bearing caps, flanges

We give your ideas take shape

Already since 1936 we convince our customers with strong arguments on the subject of molded rubber + plastic. Not without reason do us both medium-sized companies and large international corporations from diverse industries to appreciate as a powerful partner.

Whether injection molded parts, deep drawn parts, extrusion parts, etc., both in plastic molded parts as well as molded rubber parts, we are your competent partner.Allow a separate, ultra modern tooling and production facilities access to a production of plastic molded parts and rubber moldings in a variety of manufacturing processes guarantee maximum flexibility.

The following manufacturing processes, we can be adapted to small, medium and large series depict:

Plastic moldings
Injection molding
Deep drawing
-Rotational molding
Foams
Extrude
Lamination

Molded Rubber Parts
Compression
Transfer presses
Injection
Extrusion

We therefore see solutions as a holistic process to advise you qualified expert advisers and qualified application engineers, guaranteeing their active and continuous support of the choice of the optimum products to complete system solutions. Whatever your re-quest looks - you are in good hands.

When you convince yourself of our

Sulzer Innotec at a glance
Facts & Figures

Sulzer Innotec, for 60 years, the research and development center of Sulzer, performs contract research and specialist technical services and makes significant contributions to the strengthening of the divisions and the development of new business areas of the Sulzer Corporation.

Quality

According to the principle of continuous improvement, a process-oriented, integrated management system has been created at Sulzer Innotec, it includes the relevant elements for a sustainable development of health, safety, environment and quality.

History

End of the 40s were in demand with the introduction to the gas turbine development of new technologies, about the time did not have the Sulzer Corporation in sufficient measure. Thus was laid with the creation of central bodies for materials and fluid mechanics, the foundation stone for the future corporate research.

We offer high quality of production along with competitive prices and short lead time.

Our strengths:

more than 25 years of activity;
many years of experience gained by working with demanding clients, both domestic and international;
comprehensive execution of the production order: from the design to the end product
flexibility in complying with changing needs of our clients

Production programme:

- Elements for household appliances (metal and plastic components)
- Elements for auto industry
- Elements for electro industry
- Turning parts, drilling parts
- Springs – compression, torsion, extension
- Bending elements ( wire and strips –Bihler system)
- Tool development, our own tool shop
- Tube elements
- Pressed elements up to 500 t
- Injection of plastic and injection of plastic and metal together
- Casting of aluminium, brass and copper alloys and mechanical
treatment of these elements
- Heat treatment (hardening)
- All types of robotic and automatic welding
- Rolling and cutting threads up to M40

Demag Ergotech GmbH manufactures injection molding of well-known brand

High tech injection molding tool manufacturer

4 to 60 tons of tools

About Sungplastic
Sungplastic is a small to medium-sized on-demand manufacturing manufacturer of custom plastic and metal parts in China. Our services are basically manufactured in-house, ensuring direct and efficient communication with you. Our skilled workers and automated manufacturing processes enable high-quality injection molding, CNC machining and prototyping. Each process has a different purpose, from design to physical prototypes, fit and functional testing, pilot production and volume production.

Our talented and passionate engineers are dedicated to optimizing your designs, saving you money and eliminating potential manufacturing issues while delivering a meaningful customer experience. Not only do we provide all the support and services you need, we do so at a price that matches your expectations.

Our international sales team and project engineers are proficient in English and can communicate with you without any barriers. We will provide fast, reliable, clear and direct communication throughout the manufacturing process. Just contact us for a free quote and analysis, we will be available online 24/7 to support your business.

Know more about us: https://sungplastic.com

Coating of plastic, glass, metal and carbon surfaces

We manufacture precision turned parts for every area of application - from simple turned products to complex workpieces with complex shapes and contours in medium and large series.

In addition to turning, milling and drilling, we take care of all the finishing work. You receive ready-to-install workpieces from a single source, perfect down to the last touch. Our certified quality management guarantees the highest quality at every stage of production.

We supply customers from various industries with our wide range of turned parts

CNC Plasma and oxy fuel cutting, Welding MIG/MAG and TIG

We are a family owned light alloy diecasting foundry founded in 1974, which works in the ISO 9001: 2015 and IATF 16949: 2016 certified quality management system. The company has 2 melting furnaces and 11 die casting machine, from 400 to 1100 tons, all fully automated, and is able to do all the necessary processes to provide the customer with finished parts ready to be used in production adding all kind of machining, leakage controls, 3D tomography, painting, and many others. We have a long experience in the die casting of for chairs, and we collaborate with the major Italian manufacturers.

In addition, recently, to ensure a complete service to the customer, it acquired the company Svea Stampi, which specializes in the construction of highly complex molds for plastics and aluminum die casting with an ISO 9001: 2015 certified quality management system.

With its experience of over 35 years, Svea Stampi can offer you multiple services, including the choice of the most suitable materials for the specific product, choice and study of the type of feeding through the simulation of filling, solutions for the simplification of the mold, molds for prototypes, dimensional surveys, as well as after-sales assistance and modification interventions.
We design molds with dimensions up to 1450 x 1200 mm for presses with clamping forces up to 1500 tons.