Using its experience gained from a long-standing tradition in massive forming and subsequent machining, Schmiedetechnik Plettenberg produces high-precision components for international customers in the automotive and non-automotive sectors.

Why you are right with Schneider turned parts?
Because we are already on the market since 1952, we continue to evolve, have a small staff to respond quickly enough and skilled workers to deal with all the requirements of our customers always meet. Long-term business relationships prove that our performance fit.


What Schneider turned parts for you making?
We manufacture long turned parts up to a diameter of 38 mm and a length of 1000 mm, also short turned parts up to 60 mm in diameter made of aluminum, copper, steel, stainless steel, brass and plastic. We milling, drilling, grinding, pressing. Here we are, we specialize in medium and large series. The finished parts are available either completely or we store them in our computer-controlled warehouse for you.
We work with a modern equipped PPS and MDC system and put all the tasks required by our customers to quickly and effectively, eg consignment stock, Kanban deliveries or dial-up calls.


What else is there interesting about Schneider turned parts?
Our skilled professionals, we form largely from themselves and develop them to professionals so that we can meet customer requirements in the future.
Already experienced in training as a machinist and experience our employees, our customer orientation.
With our modern heat exchangers, we use the waste heat from the engine to heat the production halls, which saves us operating costs and helps the environment.
With flexible employees in multiple shifts we can keep delivery times short and absorb demand peaks.

Quality connecting ...

Anything but ordinary: Founded in 1991, the shock GmbH has etabiliert as drawing parts specialist with vast experience in the fastening, assembly and fastening technology. Through performance and quality of highly trained employees, our customers more than satisfied close sets. A great success, which we see as a guide for the future, because Swabian Tüftlertum, bodenstaendiges growth and professional service will remain our most important milestones.

Whether as a training company or as a forward-looking company with an excellent reputation, we are rooted in our values, as well as always open to new ideas: for example, for your inquiries, to which we look forward.

In this sense, we are updating our story, which always puts a traditionally at the center - the success of our clients including high-profile screws wholesalers and industrial large customers from different industries.

Where other abwinken, we are happy for you to go to the starting line: rotary and stamped parts outside the norm, from small lot to the very large quantities. Whether high-quality fasteners such as screws, nuts or DIN / norm parts -. Their special requests are part of our standard, because we even away from the ordinary, the manufacture what you need.

It is precisely this flexibility and customer orientation is characterized buns from: With certified quality we deliver to you as part of the production as well as cooperation with longstanding punctual, fast and reliable. The basis for this is our comprehensive know-how that has grown to more than 20 years and has shaped together with our German / European top quality industry's first-class reputation of the company "screws and turned parts Schock GmbH".

And we are a little proud, but see this primarily as a commitment to anew to be present for our customers every day with Topp services - in the automotive sector by working with certified partners (at least ISO 9001:2008), which not only our high, but also the strictest requirements in accordance with ISO TS 16949 meet.

With us it's all about (Precision) turned parts in standard and customized designs and DIN standard parts with special features. The focus of our core competency focus is on the quality of the advice, the variety of products to a wide variety of editing options with different surfaces and a high flexibility with regard to the economic quantities.

Our range at a glance:

DIN standard parts with special features:
CN = peak (DIN EN ISO 4753), FO = studs without interference thread (DIN 962), etc.

Processing:
Depending on the accuracy and tolerance, we offer appropriate processing options. Our machinery ranging from CNC to NC. With additional manual work we can keep production costs low, since not always tolerances of 0.01 mm are required.

Surfaces:
Electroplating and heat treatments are just as important as electro galvanizing, hot-dip galvanizing, silver, gold, nickel plating, bronzing, phosphating, barrel finishing, zinc flake coatings (CrVI-free) and clamped / sticky thread fuses acc.DIN 267, Part 28 / DIN 267, Part 27, etc.

Materials:
Steel, stainless steel, nonferrous metals, plastics, special materials: 2.4952, Inconel, Hastelloy, Nimonic 80A, titanium (3.7035), tantalum, zirconium etc.

Production program Turning:

Precision turned parts with axial and vertical drilling and milling operations; hard turning; inner square, hexagon socket; keyways; milling contours in the diamete...

As a metal-processing industrial company, SBOT employs about 350 people at its Ternitz location. A 100 % subsidiary of Schoeller-Bleckmann Oilfied Equipment AG, we are listed on the Vienna Stock Exchange, we have around 1,200 employees worldwide and are part of an internationally active group.

As global market leader, we process and distribute our own non-mag steels and manufacture high-precision parts for the oilfield industry, which we export to all oil-producing regions in the world.

With our products, we supply the core components for MWD/LWD parts, which are used for measurement and determination of data during the drilling process on the oilfields.

As a supplier for machining long parts from various materials (especially high-alloy steels), we can support customers in all sectors of industry with our many years of experience in metalworking.
Certified in accordance with EN/AS 9100 in 2016, SBOT has also made its first successful step into the aviation industry.

We are a family business that specializes in the area of tool cabinets and workshop supplies. In our product range you will also find welded parts made of thin sheet metal, pipes, turned and milled parts. We have been successfully manufacturing parts to Germany and Austria for 24 years.

We are a family-run, small, fine company that is committed to the production of turned parts of all types. In this way, we cover all facets of turned part production, from small to large series, from the long turning and short turning and multi-spindle areas. We can machine all diameters from the bar from 4.00 mm up to 65.00 mm. In terms of materials, we are also very versatile and manufacture all common types of steel and stainless steel, as well as aluminum and brass alloys, as well as plastics such as POM or PEEK.

The shoemaker Präzisionsdrehteile GmbH offers since 1949 through precision and quality in the design and manufacture of turned parts and related assemblies. Approximately 1,800 New parts annually prove this.

Schulte-Tengler GmbH is your partner for precision turned and milled parts.
- Precision is not a godsend! -

On an area of 2,500 m², we use the most modern machines to manufacture precision turned and milled parts with a diameter of 3 - 450 mm and lengths of up to 800 mm. According to your specifications, we deliver ready-to-install, including all rework, spaces, as well as surfaces and heat treatments.

Our customers are spread across a wide variety of industries, e. B.

- Automotive
- Mechanical engineering
- Wind turbine construction
- Electrical engineering
- Fastening technology
- Hydraulic component construction

uva.

The family business Schüttler Technik has been active in industrial sheet metal forming and apparatus engineering for more than 40 years. With around 85 employees, we create all conceivable products for our customers - innovative, skilled, and always with the highest quality.
Demands and technology in today's sheet metal forming sector are constantly changing, while quality standards continue to rise. Our entire industry is caught up in a rapid development process. Schüttler Technik is always willing to face these dynamic challenges head on, and make the most of these new technical opportunities. Since Schüttler Technik was founded, we have always relied on state-of-the-art technology. Our great willingness to innovate has paid off. Especially for our customers, who can always access a portfolio of services which always keeps up with the times.

Looking for a reliable and competent business lines for your production? We are a Supplier
of components and mounting hardware for various machinery manufacturers
in the Lake Constance region. Our many years of experience in the production
embroidery machine parts and assemblies for the Saurer Hamel
AG in Arbon we use in the production of high-quality, machined
machined parts and assemblies for various machinery manufacturers
one. We can advise you and look forward to offer you our performance
to prove!

We offer the following services:
- We manufacture sophisticated items according to your specifications
- We do the assembly for complete assemblies and machines.
- We advise you in the technical implementation of the production of your machines / machine parts.
- We advise you in the selection of materials.
- We purchase / store for the required production material.
- For larger groups and machines, we offer a spare parts service.

At Perfect Seal, precision, accuracy, and quality are the cornerstones of every machined part we produce. Our commitment to promoting quality products and providing speedy technical support has made us an indispensable part of the Romanian industrial community since 2003. Leveraging a range of engineering services and cutting-edge technologies, we are dedicated to continually improving the quality of our products. With our expertise in CNC machining of finished products from a diverse array of plastic materials and beyond, we cater to clients across multiple sectors.

With great dedication, know-how and innovative technology ready Sczesny pattern and special machinery and tooling Sczesny your product requirements demanding precision parts made of metals as well as highly complex plastic-metal composite parts as unique and in small and medium series production.
Housed at the high-tech location Jena please contact us, ranging from consulting to manufacturing and assembly to logistics and after-sales services, with our services at your disposal.

Our references have benefits for enterprises of mechanical engineering, laser optics, aerospace engineering, metrology and medical technology as well as research and educational institutions.

- Laser cutting of metal sheets and pipes
- Quality welding to DIN 18800-7 "B"
- Assemblies
- Bending and folding
- Punching, stamping and pressing parts
- Water jet cutting
- Laser marking
- Vibratory Finishing
- NEW + + + laser parts and folding up to 4 m in length

Services
For customers, we are problem solvers, and partners. - From a simple laser part to complex assemblies we manufacture everything according to customer requirements. Whether from a hand sketch or a DXF file: Together with our clients we find the solution. On short-term supply needs, we respond flexibly and simultaneously meet all quality requirements of our customers.
The surfaces we deal with experienced partners.

- Laser cutting
Steel: 25 mm thick in size 4000 mm x 2000 mm
VA: 25 mm thick in size 4000 mm x 2000 mm
Aluminium: 15 mm Thickness in the format 4000 mm x 2000 mm

- Laser marking
VA, aluminum and brass up to a size of 400 mm x 600 mm

- Water jet cutting
Virtually all materials in the format of 4000 mm x 2000 mm
Please queries whether the desired sheet thickness is available in stock.

- Bending and folding
Steel: 5 mm thickness and 4000 mm length
VA: 4 mm thickness and 4000 mm length

- Welding
All common welding processes such as MIG, MAG or TIG steel and VA

We work with the biggest Italian and international groups in many different sectors and markets and our strengths are the flexibility and dynamism that allowed us to reach in few years a level of exponential growth to which we can add a notable rate of customer satisfaction.
We are convinced that thanks to our own flexible and dynamic way of relating to the market, and to our customers, we can face the difficult and typical challenges of the new global economy.
Our machine fleet is continually updated paying attention to new technologies, which enable us to go further to optimize the range of our production and allow us to deliver the finished product including the necessary certifications.
We hope to start with you as soon as possible an interesting collaboration and to add you to our best customers.
For any other information or doubt we stay at your complete disposal and wait for your request for quotation.

Originally, we come from processing metal workpieces to the highest quality level. And even today, we are still passionate about perfection and precision — just in other dimensions!

Driven by the conviction that there is a solution for every task, we are constantly facing new challenges. The challenge of being able to convince you of our performance also gives us the incentive to apply to you as a mechanical engineering partner.

Take advantage of our many years of experience in manufacturing welded structures, table tops and turntables in all common materials, precision classes and surface treatments.

We are a competent and motivated team with an optimal price-quality ratio, which specializes in the area of pipeline manufacturing.

Select Tube GmbH quickly and cheaply manufactures just-in-time required parts according to samples or drawings, from prototypes to small series.
Pipes in the materials steel, stainless steel, aluminum, winding tube or copper.

Quality with which we convince:

- High flexibility, even for short-term requests
- High vertical range of manufacture
- Piping systems completely ready for installation
- Reliable customer service from the offer through production to delivery
- A young team that will be happy to advise you on all aspects of piping systems
- Production according to sample management, if no documentation is available