Find specialized suppliers for model making on Techpilot. Our platform offers access to suppliers who use advanced techniques to create precise models for various applications. Benefit from comprehensive market transparency and optimize your supplier selection.
The company Antech Polymertechnik GmbH is an innovative quality partner for silicone molded parts and plastic molded parts (single and multi-component parts).
With our know-how in toolmaking / dosing technology / cold runner technology and over 20 years of experience in injection molding, we are looking for new, noticeably demanding 1k / 2k silicone molded parts. In addition to classic injection molding production, we support you, project-related, in component design / optimization, material selection, etc.
We are looking forward to your inquiry.
Founded
1998
Employees
10 - 20
Certifications
Freiberg am Neckar
Germany - 71691
Founded
1938
Employees
20 - 50
Certifications
Attendorn
Germany - 57439
Founded
Employees
Certifications
Rottenburg
Germany - 72108
Founded
2002
Employees
< 5
Certifications
Ludwigsstadt / OT Ebersdorf
Germany - 96337
Would you like to know which suppliers are ideally suited to your requirements?
Register now and submit your request.
Of intuition, architecture and design models
Plastics and Processing
Processing of plexiglass / acrylic
Prototype and Special Production
Advertising and advertising
Tarpaulin and Vinyl Lettering
Frästeile
Fräsbuchstaben
Plastics Technology
Plexiglas plates
Acrylic glass cutting
CNC milling
Vinyl lettering
Founded
Employees
5 - 10
Certifications
Dohna
Germany - 01809
Founded in 1998, ARCARM S.R.L. is a manufacturer of technical rubber parts for various industries. The company is specialized on hydraulic rubber seals for the automotive and construction industry, but recently has expanded into almost every industry in need of rubber molded components. Certified rubber compounds (NR, NBR, EPDM, Silicone, FKM, CR, etc.) from different manufacturers are used in the parts production process. Being a member of IMDS since 2019, we value the quality of our products.
Founded
1998
Employees
5 - 10
Certifications
Baia Mare
Romania - 430064
Gravity die casting
Hand moulding (sand casting)
Investment casting
Machine moulding (sand casting)
Pressure die casting
Founded
Employees
Certifications
Otrokovice
Czech Republic - 76502
Aria was founded on a simple principle of providing the customers with one-stop solution of design, development and production for both plastic and metal components and its support tooling.
And we are set to compete in anything the industry has to offer in terms of quality, price and services.
Aria’s high-tech manufacturing and production facilities include CNC Turning, Milling, Injection Molding, Die casting, Stamping as well as a range of finishing techniques.
We welcome your queries!
Founded
2010
Employees
200 - 500
Certifications
COVENTRY
United Kingdom - CV2 4AQ
Founded
Employees
Certifications
Turkoba Mah. B.Cekmece
Turkey - 34500
The Artur Schambach GmbH & Co. KG manufactures gauges and test equipment, special equipment, precision parts, prototypes, fine blanking and progressive dies, pressing, injection molding, die casting molds and special tools of all kinds, we also provide a wide range of precision steel components and a variety of special machines and SPC measuring stations the highest accuracy ago. In addition, logistics and materials handling solutions.
From the development and design of the single-part and series production up to delivery of goods with measuring protocol Artur Schambach offers the entire range of services. 70 years of experience and technology development we benefit from it.
The company was founded in 1939 by Artur Schambach in Berlin and currently employs over 70 experienced toolmakers, engineers, technicians and masters who provide our customers with their high professional skills as always competent, reliable and powerful partner.
Founded
Employees
50 - 100
Certifications
Berlin
Germany - 13403
Medium-sized family with tooling, plastic injection molding, Roboterlackieranlage, component assembly
Founded
Employees
Certifications
Neumarkt/Wallersee
Austria - 5202
We offer a wide range of products in the following business areas:
Foundry model
Prototype
Molds, jigs and fixtures
Gauge
Toolmaking
As an ambitious company, we are always looking for dedicated, competent professionals!
The broad sector diversification of our customers reflects the flexibility of our company resist:
Machine Tools
Automotive industry
Racing supplier
Designer
Packaging industry
Electronics industry
Valve Company
Thermoforming and Schäumindustrie
Carbon parts industry
Our experienced team of professionals in the field of model and mold making, we support our customers in all areas. From the NC just parts manufacturing to pour and form technical preparation of the drawings and 3D data, up to small series.
In any event, our team will ensure fast, customer-oriented project implementation.
Founded
1998
Employees
5 - 10
Certifications
Traun
Austria - 4050
Since 1960, SCHWEIZER Kunststofftechnik has impressed with the highest quality standards and services.
With state-of-the-art machines and a team of experienced specialists, we specialize in technical and optical plastic injection molding and process all common thermoplastics and thermoplastic elastomers with and without fillers.
We understand that every project presents its own challenges and are proud to be able to respond flexibly to our clients' needs.
Regardless of whether it is small quantities or extensive production runs — our goal is to fully meet your expectations.
From project planning to series production, we can provide you with comprehensive support; environmental protection and sustainability are a matter of course for us.
Founded
1960
Employees
50 - 100
Certifications
Forchheim
Germany - 91301
Aspotec designs and manufactures products printed on cold plate, guaranteeing high quality results thanks to the coordinated engineering, workshop, production department, quality and logistics
Aspotec is able to design and build step, transfer and simultaneous molds in order to provide a complete and satisfying service to the customer.
CADCAM and 3D software design, prototyping and the construction of pilot / pre-series molds allow the company to cover a wide range of technical requirements.
Aspotec, in a totally autonomous way, deals with each design phase with the competence, preparation and technological structure suitable for achieving maximum precision in the production of sheet metal stampings
Technologies such as simultaneous, progressive and transfer molds give Aspotec the opportunity to work for customers active in different production sectors, such as automotive, white goods, industry and heating.
Founded
1996
Employees
20 - 50
Certifications
San Secondo di Pinerolo (TO)
Italy - 10060
We are engaged in the development of new plants and the optimization of existing ones
AS Technology s.r.o. was founded on the basis of our efforts to understand the current and future needs of customers, meet their requirements and exceed their expectations. In a demanding competitive environment, our company attaches great importance to high-quality customer service, which is why we offer everything from simple preparations to more complex preparations through our own production. The initial analysis of the customer's needs allows us to design a suitable construction, package or preparation and to cover their needs. We are engaged in both building new devices and optimizing existing devices.
We focus primarily on designs such as:
Assembly workstations
transport carts
welded structures
Constructions from the pipe system (various workstations, shelves, FIFO)
Constructions made of modular aluminum profiles from Bosch/Rexroth
rotating assembly table, static assembly table
internal and external customer packaging
We also offer:
welding, bending and firing
Tefloning of parts with various types of Teflon
In production and design, we use extensive know-how and many years of professional experience in the automotive industry.
Founded
Employees
5 - 10
Certifications
Bratislava
Slovakia - 85101
Would you like to know which suppliers are ideally suited to your requirements?
Register now and submit your request.
Founded
Employees
Certifications
Tomblaine
France - 54510
Founded
2016
Employees
5 - 10
Certifications
Ilsfeld
Germany - 74360
ATOS has been designing and building injection molding tools in north-east Italy since 2000. Thanks to our project department in the company, we are able to produce high-quality tools on time.
Our main activity covers unlimited industries: from automotive, household appliances, packaging to white goods, technical and aesthetic parts, sports and leisure, office / furniture, industrial transport, lighting, telephone industry, fastening, medical and rubber parts. All new areas are our challenges!
The technologies we successfully use are 2 - 3k, IML, internal gas pressure. Turntable, cube, transfer and multiple tools (up to 128 cavities) can be found at ATOS for production!
Our production range also offers prototype aluminum molds and tools with automatic and semi-automatic operation; Low-cost molds and tools for small series.
In addition to our main activity, we offer tool service: adjustment, maintenance, servicing and repairs, including on third-party tools.
We adhere to the agreed technical and financial deadlines and delivery times.
ATOS tools are our success!
Founded
2000
Employees
10 - 20
Certifications
San Quirino
Italy - 33080
"From concept to mass production .... everything from one source."
Our goal is to offer our customers an all-round carefree package. That said, you bring the customer the idea, and thus the ball rolling. Everything else, from development tool manufacturing to mass production comes from our side. As we know from our own experience here, how difficult is the path from idea to finished product, we want to help you this way considerably.
Save for example, the way the designer as a toolmaker or from there to the production site. Is available in the rule A contact person is available, which reduces the times of development drastically.
Founded
1992
Employees
10 - 20
Certifications
Teisendorf
Germany - 83317
Production of highly complex prototypes
In 3D Modeling (stl) files are created in a layer printing process solid three-dimensional moldings on the basis of three-dimensional computer data. This method is a cost effective solution for the production of prototypes. Due to the rapid production of prototypes, the time between product development and launch can be significantly shortened.
Take the opportunity - Time is money
Founded
2008
Employees
5 - 10
Certifications
St. Peter i.S.
Austria - 8542
Find the ideal supplier in just 1 minute
Communicate directly with buyers
Unique market price comparison to realize the best prices
Existing processes, systems and suppliers can be easily integrated.
Buyers use the platform completely free of charge
