In 1948 Moritz Kurt Juchheim founded the company M. K. Juchheim GmbH in Fulda, and started the production of high-quality glass and glass contact thermometers. The trade name JUMO is derived from the name of the founder (Juchheim, Moritz). The product spectrum was gradually expanded after 1950. In 1985 Bernhard Juchheim, son of the founder, took over general management. The mother company was renamed as JUMO GmbH & Co. KG in June 2003, to match the naming of the international subsidiaries. At the same time, Michael Juchheimwas appointed as C.E.O. with power of sole representation, as was his father, Bernhard.

Now in the third generation of activity as a family-owned enterprise, JUMO has a staff of more than 2,200 employees throughout the group. It is very well established, with 5 subsidiaries in Germany, 24 foreign subsidiaries, and more than 40 agencies around the world.

Today, the extensive product spectrum from JUMO covers components and system solutions for the measurement, control, recording and analysis of physical and chemical parameters. The products range from sensors for temperature, pressure and analytical measurement to the control and recording of measurement data. These instruments and systems are used in a very wide variety of sectors in the capital goods industries.

The support of the two prefabrication divisions for metalworking and electronic modules provides the company with a fast, flexible response. And customers can acquire everything from a single source – from simple system modules to complex process software. JUMO does not restrict itself to offering standard items from large-scale production, but is always oriented to the needs and specifications of its customers. The company’s development department and the expertise of its employees facilitate individual customer solutions that meet the highest requirements for functionality, precision and easy-to-use operation. A global service network, consisting of 13 independent sites abroad with additional external service partners, ensures that JUMO is always close to the customer.

Company KADING gathers experienced engineers who have developed their skills on projects which have required multi-disciplinary knowledge (mechanics, hydraulic, etc.)

Our competences:

Engineering services:
- conceptual product development
- 2D/3D product design
- reversible engineering
- optimization of products and manufacturing processes
- calculations and FEM analysis,
- preparation of production documents (technical drawings, technologies)
- creation of related documents/documents for users (spare parts catalogs, operating and maintenance instructions)
- preparation of documentation for product certifications
- product visualization (rendering)

We are providing services with licensed CAD software SolidWorks (2 Premium + 2 Standard) and Solid EDGE 2019, with the possibility of EPDM integration (total 4 SW PDM Professional licenses). Our engineers also are familiar with other CAD systems (CREO, CATIA, Inventor) so we are also able to support you in that area, dependable on the project and its duration.

Manufacturing & prototyping:

Together with our partners, we are also offering the following services:

- Milling & Turning
- Welding (MIG / TIG)
- Cutting (plasma / laser / waterjet)
- Bending
- Punching
- Assembling (mechanical / hose / welded)
- 5 axis milling

We have successfully implemented a quality management system according to ISO 9001:2015 into our business processes which shows our dedication to providing quality and best possible services to our clients.

We are inviting you that you allow us to present our services and we wish that your company becomes part of our satisfied customers.

We provide metal fabrication and forming services that cater to industries of all kinds. From small projects to large projects, we pride ourselves on delivering quality services with consistency every time you order from us.

Main profile of the company production of sheet metal products, steel structures,
Schaltschraenke, Reklamschilde, single-sided exterior coverings,
Factory sentence structures, including local assembly. We have powder coating
plant, the most modern Amada machines, Laseranlade, welding robot. Processing aluminum - stainless steel - and steel sheets, and producing laboratory equipment (also Kunsstoff) Chemiche - Kabinen.Useres Qualitaetsicherungssyste was by SGS Hungaria Ltd. after the
ISO 9001:2000 standard certified.

Company Kamberg based in Poland runs jobs in the field of Metallberbeitung.
Our company operates mainly laser cutting,
Maximum thickness of the processed part are:
1. Construction steel up to 25mm
2. stainless steel up to 20mm
3. aluminum to 15 mm
We also manufacture sheet metal bending, and steel processing (welding).
Our company offers Estimates, high quality and low prices. We stehten with professional advice at your side and invite you to cooperation.

technology

We provide for the production of sheet metal parts to complex technological solutions, whether single production or series production. Our main profile is the processing of sheet metal parts of the thickness of 0.5 mm to 8 mm. Our company has production experience of over 20 years, from planning to finished product manufacturing. We provide our customers with products of different levels here, from simple crushing to the production of more complex parts. Thanks to our partners, we also take on different surface treatments.

Technological options:

Shears: cuttable thickness: between 0.5-4 mm.

Edge-turn: 5 Amada bending machines

Laser cutting: 1 Kimla Fiber Laser Cutting Machines

Punching-nibbling: 3 Amada punching machines

welding

assembly

Pem Squeeze: presses of various pressing nuts, screws and other
fasteners

Confiscation of press nuts

TOX connection technology

pressing machines

belt sanders

Drilling with frame

Our core competence is laser welding of provided parts. With the laser, very slim welds with a large depth-to-width ratio can be achieved.

Due to the high processing speed, the thermal load is low and the distortion is minimal. Contactless welding makes it possible to process complicated seam geometries and hard-to-reach areas within the workpiece. As a rule, the welding joint is fused from proprietary material.

If required, an additional material can be added via a wire feeder. With the laser, a wide range of materials can be welded without oxide (steel, stainless steel, cast iron, aluminum, cast aluminum, titanium, Hastelloy, Inconel,...)

KAROVIČ oceľová výroba, s.r.o. with its registered office in Lozorno was established in 2009 as a company active in sheet metal processing in particular. Thanks to the quality work of the entire team and the use of state-of-the-art technologies aimed at achieving supreme quality and flexibility, we offer a complex service in this field to our customers.

In the course of our operation on the market, we have expanded our operations to include mechanical engineering and locksmith production in order to offer improved quality service.

Nowadays, we offer a professional service in the field of sheet metal processing, stainless steel production for the food industry, structure welding, engineering and design works.

The company’s priority is to meet the most demanding customer requirements from the time an order is received up until its completion, while focusing on speed, quality, flexibility and economy. These objectives are reached thanks to continuous process improvement, technology modernisation, machinery expansion and by raising the entire team’s qualifications.

We are a reliable partner and a young, powerful company, with experienced professionals and a modern workshop equipment for welding, steel construction and special designs.

Our master craftsmen allowed to present himself for the almost entire range of metal processing in steel construction and locksmith craft. It has always been our endeavor to maintain a good connection to our customers maintain or extend.

We have a long experience in the field of industrial assembly and welding of all kinds

Custom made stainless steel and aluminum applications complete the product range.

We manufacture to your specifications, drawings as well as our own designs.

A good price / performance ratio, the observance of deadlines and technical requirements are a matter of course for us. Furthermore, we offer a high degree of flexibility.

Give us your trust and we will do our best.

As Kaya Tekno Çelik Yapı, we serve in the metal processing sector with advanced technology and expertise. Our company is a pioneer in the sector in operations that require high precision such as CNC press brake bending, fiber laser cutting, welding operations.

Kaykac Machine Co is a subcontracting firm for machining and metal processing works since 1982.We welcome new customers with our huge experience and modern manufacturing ability with high level quality control process.We can provide casting,forging,stamping,laser cutting and sheet metal processing as well as welded parts production.Our company has ISO 9001:2008 and EN 15085-2 CL 1 quality certificates.

Whether laser cutting, folding, welding, powder coating, assembly or much more - you are exactly right with us. Combined with our motivation and flexibility, we offer you a powerful overall package for the production of high-quality sheet metal products and assemblies.

We produce in Trimmis - from advice and planning through production to distribution, we handle everything from a single source. We are a full service provider in sheet metal processing.

Keller Laser AG in Trimmis, Graubünden, has been in existence since 1995. Thanks to high-precision and modern systems, we have been forward-looking and motivated by technical developments in our industry. "Together with quality to success", this is our motto. And with fairness, competence and environmental awareness.