In modern CNC lathes all machinable materials can

• from Ø 0.50 mm to a diameter of 5.00 mm from the coil
• from Ø 3.00 mm to Ø 50.00 mm from the rod

be processed. Profiles such as 4-or 6-kant kant also are not a problem we have lathes and short lathes in use. We can produce your turned parts and nuts from the following materials:

• stainless steels such as 1.4104, 1.4301, 1.4305, 1.4307, 1.4404 ... etc.
• higher alloyed materials such as titanium, Hastelloy and Inconel
• heat-resistant materials, such as 1.4828 and 1.4841 ... etc.
• Brass and free-cutting steels

In the area of milling, we are also able to handle all common materials. Because of our machinery, we manufacture from pattern over small and medium series up to mass production. Here we can also count on machines with 4 and 5 Axis recourse.

All parts are cleaned in our Dürr wash and are generally delivered free of grease.

We are able to polish all geometries for you and are in the range of grinding and polishing of surfaces on the cutting edge of technology. We have this several machines.

We also work very closely with a neighboring electroplating together and can therefore offer you all the surface treatments, such as nickel plating, chrome plating, zinc plating, passivate, etc. .....

We specialize in housing sleeves and flat 6Kt. nuts made of stainless steel and brass for proximity switch and sensor technology. We manufacture the sleeves according to standard stainless steel 1.4305 and 1.4571 as well as brass in the dimensions

• M 5 x 0.5
• M 8 x 1
• M 12 x 1
• M 14 x 1
• M 18 x 1
• M 30 x 1.5
• M 32 x 1.5

Of course, sleeves and corresponding nuts with tank thread (PG) are no problem for us. Similarly, the corresponding accessories such as plug or adapter sleeves belong to our production program.

We supply the main dimensions with rolled thread, so that the sleeves have a perfect look. In addition, the threads have a greater strength and are thus not as sensitive. For other dimensions, such as M 30 x 1.5, M 32 x 1.5 or PG threads are chased the threads.

The corresponding flat 6KT -. Nuts

• M 5 x 0.5 x 2.5 mm or SW 7 SW 8 x 2.7 mm
• M 8 x 1 SW 13 x 4 mm
• M 12 x 1 17 mm x 4 mm
• M 18 x 1 size 24 x 4 mm
• M 30 x 1.5 36 mm x 5 mm
• M 32 x 1.5 size 41 x 5 mm

We mainly stock.

In principle, we produce all the sleeves as well as turning and milling parts customized according to drawing, but can miteinbringen wish our suggestions and ideas.

Vision Tech is a leading Dutch supplier of (fine) mechanical parts. Besides our workshop and logistics center in Schijndel we have a location in the Czech Republic (Bohemia Vision Tech) and a large network in Eastern Europe. This allows us to produce in the Netherlands and abroad with the great advantage that we can keep costs low.

VOP-026 Šternberk, s.p. was established in 1951. The main production programme of the present-day Defence Production Division included repairs of armoured personnel carriers, automobiles and main battle tanks.

The production programme gradually specialized in repairing, refurbishing and upgrading infantry fighting vehicles, armoured personnel carriers, chassis for specialized applications and engineer equipment. The company ensures all these activities through its own design and technological development. The Army of the Czech Republic is our traditional customer.

Since 1995 we have been developing engineer production programme for civilian use, especially production of machined welded assemblies for construction and road building machines. This production is carried out within our Engineering Production Division.

* Electropolishing of Stainless Steel

* Techn. Hard anodizing of aluminum
* Chemically deburring of steel, aluminum and brass

* Gleam of brass and aluminum

* El.polieren and ink of titanium

* Galvanize

* Wage-intensive work such as grinding, polishing, pickling

The Walter Werner GmbH - specializes in metal finishing

Using different methods, we provide functional and decorative surfaces and protect as metals and plastics from corrosion and wear. The focus of our work lie in the areas of galvanizing, painting and adhesive coating. Certified to ISO / TS 16949:2009 and registered to EMAS II, we guarantee tested product quality while environmentally friendly production.

OUR SERVICES - from a single source at a single location

1 Radiate
2 Degreasing
3 Passivation
4 Phosphating
5 Anodizing
6 Galvanize
7 Zinc-nickel
8 Powder coating
9 Wet painting
10 KTL coating
11 Adhesive coating
12 Special Procedures
13 Combinations

Since 1957, the Walter Werner GmbH stands for professional finish, first at Idar-Oberstein location and from the seventies in Birkenfeld / Nahe. Whether in mass production or order production, with us it's all about the metal and plastic finishing by electrodeposition, chemical and organic coatings from a single source.

Covering an area of 32,000 square meters work daily to over 15o engineers, Galvanomeister, technicians and skilled workers for our clients, mostly from the automotive, mechanical engineering and electrical industries a.

Short distances and high flexibility set us apart. Even unusual, logistics services we can provide Europe according to customer requirements from a single location. For example, are refined at Walter Werner also components from Spain, Italy, France, the Netherlands, Taiwan, India and China.

As a family owned, medium-sized companies in the personal and professional behavior with our business partners is important. Similarly, the values of quality and environmental awareness: they are since the beginning of our company pioneering in understanding.


We are looking forward to your inquiry.

You will be legally binding.

Whether you have questions about our finishing techniques or our company - we will call you back.

Your request by e-mail, please contact: anfrage@walter-werner.de

Contact:

Marketing and Sales
Peter Weber, Tel: +49 6782 9932-49 E-Mail: peter.weber @ walter-werner.de

Technology
Frank Werner, Tel: +49 6782 9932-23 E-Mail: frank.werner @ walter-werner.de

Quality assurance
Mario Abel, Tel: +49 6782 9932-56 E-Mail: mario.abel @ walter-werner.de

WEFAG offers a broad range of CNC machining for a wide range of materials: turning, milling, drilling, barrel finishing, assembling, finishing, finishing.

We hardly know limits on the materials and their combinations, as well as FDA-compliant materials. So we work for our customers, aluminum, stainless steel, brass, copper, covenant metals and plastics.

The diversity and depth of our machining processes for these materials through to assembling the various parts is the basis for the solution also your problem.

Optimization begins before production, namely in the solution design and process planning. We stand by you with knowledge, help and advice available and bring our experience to your projects.

We work according to the latest ISO standards 9001 and are certified according to Environment 1401.

With experience and competence in the field of corrosion protection, Weinberg Industrieller Autovermietung GmbH is your reliable partner for projects throughout Europe.

Founded in 1969, family business
Current production area 8,400 m2 in Elzach in the Black Forest
115 employees, many of whom have been with the company for a long time
Highly motivated employees through appreciative and value-oriented company culture
Products: CNC turned parts CNC milled parts, medium series, large series, chemical deburring
Main customers: automotive worldwide, medical technology, precision engineering, mechanical engineering
Complex turned and milled parts production with 5 axis machining
Chemical deburring system, contract deburring, burr and residual dirt removal
Own department "Automation technology": "0 ppm" through the development of 100% automatic testing machines
Regenerative energy technology: Saving heating oil through the use of machine waste heat and the highest quality through air conditioning of the production processes
Maximum measurement accuracy thanks to fully automated and unmanned measurement technology

Expertise in sheet metal and profile processing

Our company consist of small dynamic team with years of professional experience. We specialize in laser processing, in general sheet metal processing, surface treatment and in plant and equipment. All orders are designed to match the needs and specifications of the customers. On the basis of design drawings or sketches on the basis of quality solutions for plant, machinery and buildings. From simple metal strip to the fully assembled module.


Our strengths

In small companies, all must lend a hand. With us, the bosses are in operation and work in the production. So the customer information, our know-how and the motivation for a flawless work come together at one point. Our aim is to offer customers a high-quality solution at a fair price.

For 60 years the name Wieland stands for customer-oriented solutions. Cleaning, spraying, drying, conveying - we always find the optimal solution for a smooth and efficient production. On equipment from our company is reliable. Thanks to the optimal design of the facilities and the quality-conscious production run reliably - years.

Hundreds of systems are in use worldwide:
- Cleaning and Degreasing
- Dryer
- Equipment for surface technology
- Conveyors
- Sound enclosures
- Special machines

Tell us your wishes - we will show you a solution.

The company Wilhelm Lippold GmbH & Co. KG is a traditional family business in its third generation.

We offer an integrated process chain from idea to finished product.

- Development / Engineering
- Mobile 3D metrology
- Prototyping
- Reverse engineering
- Special tooling
- Production / Manufacturing / Service

Please visit our homepage.