HERA - SOLUTIONS IN METAL Bent wire parts, stamped bent parts, cold extruded parts

In 1877 the company was founded Uebele. Since then the company has grown steadily and today offers the complete program around the punching technique. We manufacture high sophisticated tools, high-precision fine blanked parts, stamping parts, bending parts, stamping and deep drawn parts and metal pressing parts. The assembly production and the production of small and large series are part of our extensive range of services. For our national and international customers, we manufacture complex parts on the following presses: - Deep drawing presses 400-4000 kN (table size up to: 2,000 x 1,300) - Automatic punching 400-6300 kN (table size up to: 3,000 x 1,500), - Fine blanking presses from 1,600 kN to 3,200 kN, - Pressing machine to Dm 900 x 5 mm - Press brakes up to 1,500 mm long Materials / Materials: Steel, stainless steel (1.4301 / 1.4571 / 4310, etc.) and non-ferrous metals such as aluminum, copper, bronze and brass, and substance capable plastics. Sheet thickness: 0.05 mm - 10.0 mm Coil: 300 mm x 10 mm and 1000 mm x 8 mm Product Line / products: Fastening systems for photovoltaic systems such as roof hooks, shielding, Cell connectors, mugs, fittings, spacers, flanges, housings, holders, sleeves, Contacts, discs, covers, clamps, braces, disc springs, angles and gears Toolmaking The following services offered by our professional expert toolmaking: - Project development to series production - Tool design - Prototype production - Construction of composite tools, drawing tools, stamping tools, bending tools, Fine-cut and cutting tools as well as devices Subsequent processing - Vibratory grinding, brush deburring, drums, tape loops with automatic feed - Heat treatment - all standard methods (inter-stage hardening, Nitriding, Hardening, and Nitrocarburizinga) Surface Finishing / Surface coating - Powder coating, KTL, painting - Electroplated coatings of Au to Zn / Ni (chrome plating, galvanizing, burnishing) Assembly production As a system supplier, we offer our customers from different industries all from a single source - from product development to the mounted assembly. - Inert gas welding (TIG / MIG / MAG) - Robot welding - Stud Welding - Spot and projection welding - Pressure joining (Clinching / clinching) - Riveting, caulking, gluing

Since 1964 Giacomazzo Agostino Srl has been specialized in the design and construction of industrial plants, autoclaves, mixers, tanks, special filters and other custom made solutions. All our products have the CE certification as well as PED and ATEX certifications if needed. Thanks to our wide machine park and the broad expertise of our workers we can advice the best solutions to our customers.

Wecotech AG contract manufacturing is an innovative and leading company in the field of CNC machining. The basis for success and the driving force in our company are our employees. Together we pursue the goal of being at the forefront in the field of CNC machining.

We are an industrial and commercial agency with direct suppliers and production facilities in Poland, Czech Republic, China, Italy, Taiwan, India, Turkey and Germany. We design and produce together with our partners to our customers in the following areas: Welded structures such as caddies, storage racks, long-product pallets. Steel construction, welding in general. Surfaces such as rays, galvanizing, painting, powders. Sheet metal processing all materials: CNC punching, nibbling, edges, laser welding, cutting Fully automated bending center, powder coating, Deep drawing, laser cutting, punching from coil, components, Services according to customer requirements Turned parts, milled parts made of all materials Castings and their processing Plastic injection molded parts up to 2,500 grams weighing, + Toolmaking Extrusion plastic profiles Aluminum profiles and their processing Cable assemblies, wire harnesses, control boxes and control cabinets completely Agricultural Engineering Bent wire parts Diecast Bend and process tubes

We, Metallbau Schmalenbach, specialize in manufacturing a wide variety of high-quality and tasteful stainless steel and corten steel accessories. Years of experience in working with metal products, experienced know-how and the gift for exceptional design give our products uniqueness. The focus is on narrowing down to the essentials. In a charmingly flooded world, peace and relaxation are important to us. Simplicity is the goal and with it the uniqueness of our products. In addition to our wide range of products, we also offer you the opportunity to have your ideas implemented. We offer you custom-made custom-made products. You are welcome to visit us at Linienstr.14 in 42289 Wuppertal.

Punching and forming tools with its own tool. Production in lots of 1-100000 St. Processed materials: Steel sheet: 0.5-10mm VA-sheet: 0.5-3mm AL-sheet: 0.5-5mm MS sheet: 0.5-4mm, Cu sheet: 0.5-4mm Rod material are 15mm thick and 6m Length max. Tool dimensions: 900 mm max. Press force: 2500 KN Tube processing to D 200mm Deep drawn parts to D 250mm

C. Melchers & Co. was established on January 1, 1806 in Bremen, where the global company still maintains its headquarters to this very day. In the first few decades of the company’s history, over 30 ships sailed the oceans of the world under the Melchers flag, linking the ports of Europe, America and the Pacific. In the 1860s, C. Melchers & Co set up operations in Asia, where all its trading interests swiftly moved. At the same time, with the onset of steam ships, it abandoned its own shipping business to devote itself entirely to extending its trading operations. 1866 saw the establishment of the first branch in Hong Kong, in the wake of which China began to develop into a key lynchpin for the company’s business. The ensuing decades were a period of rapid growth for Melchers in China, with over 2,000 people employed at 12 branches and plants throughout the country. The First World War proved to be a setback for business relations, although business quickly recovered. It was not until the end of the Second World War in 1945 that business came to an almost complete halt. Even so, the company continued to survive, re-opening its first branches in Hong Kong, Singapore and Kuala Lumpur in the early fifties and gradually extending its branch network across Asia. Following the opening of the Chinese markets at the end of the seventies, Melchers set up branches here again, underscoring the significance of Chinese business for the company. With the establishment of a branch in San Francisco in the early eighties, the company also started to engage in US-Asian trade so as to gain a share of the rapidly growing trading relations between these two regions. Trade with China remains a key focus of the company’s overall business, comprising as it does imports of special natural products and finished goods on the one hand and exports of plant, machinery and supplies for the Asian industry on the other. Yet, business with South East Asia has since also come to the fore, with the company amassing broad-based expertise in marketing and selling consumer goods in particular. There are special departments for each article group in Bremen as well as at the foreign branches. They work largely independently within the overall company and are staffed by highly qualified experts. Over 1,000 employees in Germany and abroad assist customers and suppliers with their specialist knowledge. Rather than being based at the company’s headquarters, most of these employees are now stationed at subsidiaries, something which in turn reflects the company’s further development and the strategic alliances which it has forged.

For more than two decades, we meet innovative and reliable the wishes of our customers. Whether solar industry or aviation and space technology - our expertise is in demand in various industries. And in a variety of situations: They have capacity constraints? Congratulations! We're here to help: Even with small numbers or short-term orders, you can rely on the high quality and punctual contract manufacturing Mobitec. Philosophy Our customer understanding is holistic: We Mobitec want you to feel completely comfortable. That's why you get from us next to a clever system of course accurate measurement protocols, high-quality tools to make informed and personalized advice, a competent 24-hour service. Where - of course that's not natural. But this is precisely the Mobitec philosophy. Innovations Do you have special requirements and want no technology off the shelf? Welcome to Mobitec.We take the time and advise you personally, individually - and honest. The trustful environment that we maintain with our customers is the best basis for the pioneering machine solutions that we design and produce for more than two decades. We specifically cater to your desires and create standard modules flexibly according to your needs. If necessary development work, then you rely on the innovation of our expert team - the next bend we have for you already know the right innovation at hand. Industries Mobitec strikes the arc and has worked for a variety of industries. Our well-known, challenging customers come from the automotive industry, the furniture industry, solar technology, climate and heating technology, medical technology, aviation and space technology, and of course special areas. With all we share a trusting, with many a long-term partnership in which we are all so hinbiegen, as only an experienced, certified A-supplier.

Our company was founded in 1999 and has since performed as a sole proprietorship. Initially, we offered our services in the areas - Laser cutting, - Milling and - Grinding of. Over the years, we expanded our range to include the - Cutting production, - The folding and - Welding and were thus a competent partner in the component and system manufacturing. In collaboration with our partners for surface treatments and heat treatments we offer our customers ready to install solutions.

We are a small company, founded in 2007 company based in the center of Cologne. We are specialized in the production of precision parts from all areas and materials. From a single prototype to series, we use the most modern equipment of the highest quality.

Plasper Srl is an automatic turning company specialized in the supply of high quality small metal parts for numerous application sectors. Born in the nineties, driven by the strong passion, ingenuity and innovative spirit of the partners, the Plasper is today a state-of-the-art engineering laboratory, which supports the customer in an integrated way by leveraging the use of advanced technologies, extreme precision in the execution of projects, strict quality controls and the know-how of its staff. Plasper Srl's goal is to support the customer throughout the entire production cycle for the development of its products and components. The experience gained since 1991 (the year the company was founded) allows us to provide the customer with support even during the design and prototyping of the required components with the aim of creating a better product at lower costs.

We, Leistritz Produktionstechnik GmbH, based in Pleystein (Upper Palatinate), supply solutions for complex manufacturing tasks. Our product range is divided into the areas of machine tools, carbide tools and tube technology/sheet metal forming. We are a supplier to a wide range of industries, especially the automotive sector.

Öztug manufactures rubber molded parts (with and without metal attachment), plastic injection molded parts (with and without metal attachment + 2K) and bent wire parts with its own tool shop. We are already working with well-known companies such as Toyota Boshoku ,Webasto Convertibles, Sew Eurodrive , WOCO, Stabilus GmbH, Hydac Filtertechnik, Conductix-Wampfler, Grammer (Bursa) and Kiel. Our services begin with the first hour of development and extend to series production. Thanks to our mold construction, we can produce prototypes at short notice. We are convinced that we are a suitable partner for you with our vertical range of manufacture and our high level of quality. 1990- Esatablishment; machine-free prodcution was realized. 1997- Rubber machinery investments were made. 2002- Toolshop investment was made. 2003- Plastic Injection investment was made. 2005- Production started in NOSAB. 2006- ISO TS 9001 Certificate was obtained. 2007- Production started in Adapazarı. 2011- ISO TS 16949 Certificate was obtained. 2013- Production started in HOSAB. 2018- IATF 16949 Certificate was obtained. 2018- Lean management working was started. 2018- ‘’design Center Approval’’ was obtained from the Ministry of Science,Industry and Technology

The owner-managed company Aloys Kleier is a service company in the field of small-scale component manufacturing, hardware and electrical installation. As a cooperation partner of the industry, we bring by screws, rivets, welding and gluing together on 4000 m² of production space, what belongs together. In addition, our staff have many years of experience in the fabrication and installation of staircases, ramps and railings, pipelines, metal and welded constructions of all kinds Our range of services is complemented take over all activities of a classic Metallic, ie including sheet metal and metal processing including welding, Kant, drilling and sawing and we done quickly and efficiently. The customer gets to us all from one source. We service the products from purchasing to warehousing, manufacturing, assembly, logistics and all emerging problems. Flat hierarchies fast communication and flexible production methods are guaranteed. All orders we carry uncompromising from the complete satisfaction of the client. Partnership based on trust and maximum quality form the common success for both sides and are the basis for a long-term cooperation.

BALSTER, s.r.o. is a company active in the global area of engineering production, we offer you: = Casting: - hand moulding (sand casting) - machine moulding (sand casting) - continuous casting - gravity die casting - investment casting - low-pressure casting - modelmaking = Sheet Metal Processing: - bending / folding - laser cutting 2D, 3D - punching / pressing (Out-of-tool) = Welding: - MIG/MAG, TIG - manual electrode welding - robot welding - spot welding = Welded constructions / Structural Steelwork: - machine frames / bases / racks - welded constructions (weldments) = Pipe & Tube Manufacturing: - pipe bending - pipe forming = Turning = Milling = Drilling / threading / tapping = Surface Treatment: - powder coating - wet coating - sand blasting - spray-painting - annealing - hardening - induction hardening We provide our customers with professional global services from the drawing to the delivery, including the quality control, packing and the transportation of the finished products.

We produce turned and milled parts according to the highest quality requirements. The processing possibilities, surface treatments and a modern warehouse combined with fast and efficient logistics management make us the ideal partner for your projects. Our components can be used in gaskets, co-molded with other materials, used in the assembly of other components such as gears, valves, plastic manifolds, etc. We are able to supply turned parts with complex geometries and elaborate milling jobs (e.g. asymmetrical geometries, cross holes and threads) up to a diameter of 60 mm Long turned parts with diameters from 5 to 22 mm and a turning length of up to 200 mm (milling work using the y-axis) CNC turned parts with diameters from 5 to 65 mm (e.g. with face milling for keys, eccentric operations and trapezoidal threads) Circular turned parts (e.g. with milling and threading) THE MATERIALS WE ARE ABLE TO WORK: Stainless steel eg. 1.4301, 1.4305, 1.4401, 1.4571 Automatic steels eg. 11SMn30 + C (1.0715), 11SMnPb30 + C (1.0718) Steels eg. St 37-2, C15 Brass / tin bronze eg. CuZn, CuSnZnPb, CuZn39Pb3 (MS58) Aluminum eg. AlMgSi, AlCuMgPb

Officine Parolin is located on the North East of Italy. We employ 18 people and are specialised in the wire, tube, and stamped sheet processing. Our core business has been the welding since 1985. We mainly work on projects and drawings supplied by the customer. Our flexibility enables us to offer many sorts of customised products: from furniture, sport equipment, up to lightweight construction. We work the following metals: Steel, Stainless Steel, Aluminium. The cooperation with local partners grants us to supply the following services: painting, galvanising, sating, anodising and other surface treatments, laser cutting on sheets and tubes. The company is certified according to ISO 9001:2008 standards. Small quantities to process is not a problem for us!