Story ...
Nägeli Swiss AG is a family-run SME with around 25 employees and, as a supplier, manufactures customer-specific components with increased requirements in terms of material and precision.
The company was founded in 1941 by Ernst Nägeli in Arbon as a stamping shop and quickly established itself as an international sales market for ball bearing cages and screw locks (tooth lock washers and spring washers). In 1948 Ernst Nägeli moved production to the current location in Güttingen TG on Lake Constance. In 1956 and 1970, the premises were expanded and new production and office buildings were inaugurated.
Forming technology ...
In the following years and decades, the stamping and deep-drawing technology was continuously developed further, know-how for the processing of higher-quality material qualities developed and the competence strengthened to develop component and process-optimized solutions together with the customer. Today, Nägeli Swiss AG specializes not only in the processing of common deep-drawing steels, but also in the forming of rust-resistant stainless steels, aluminum, brass and titanium with material thicknesses of 0.04 to approx. 3 mm. The internal tool design and in-house tool making ensure that the development time until delivery of the first sample is minimized. With the in-house hardening shop and the assembly of modules, interesting follow-up operations can also be offered from a single source.
In addition to the supply of components to B2B customers, Nägeli Swiss AG also produces a finished product with the Nägeli-PICA cutters. Thanks to a special blade geometry, the pruning shears, pruning shears and pruning shears produced by cutting and forming technology minimize the force required. Together with a scissor holder and a saw, this results in a unique cutting set that is very popular with both professionals and hobby gardeners.
Fiber composite ...
The company has also been involved in fiber composite technology since the mid-1980s. From product development to prototypes, one-off production and series production, Nägeli Swiss AG is an expert contact.The versatility of the material continuously widens the range of parts and customers - for example, the project portfolio includes components for aerospace, aerospace, sports, hydropower, Formula 1, mechanical engineering and the music industry. In 1994, the company received the certificate as an approved supplier for the European aerospace industry as part of a series production of components for the Dornier DO328 aircraft. In 2006, the iF Gold Award - a European design award - for a robot arm for the packaging industry was accepted. Since then, a large number of other industries have also been supplied with specifically developed fiber composite products, such as for bed suspensions, space components or components for various musical instruments.

Founded on April 20, 1994, Nema Çelik has been working in the construction sector in the fields of steel, stainless steel decoration, glass and aluminum for 21 years, and designs special projects and designs in its own design office, produces and applies in its own facilities.
It has taken its place in elite projects at home and abroad. By closely following the developing technologies that we have been continuing for a long time, we offer you by applying the knowledge, experience and technology in the sector in the most efficient way with our trained personnel. In this way, the most important feature that distinguishes us from our competitors is that we are quality and result-oriented in a short time.
With our metal mold workshop that we established in 2013, all kinds of automotive, by-products used in construction, occupational safety panels, automotive and metal molds belonging to all sectors are produced and if desired, material production is also made as a product and service is provided to the customer.

Good day

We are a company from Poland

We would like to offer you cooperation in the areas of laser cutting of sheets, 3D laser cutting of profiles and tubes, bending and much more

We are engaged in full metal processing:

* Laser cutting up to 50mm
* 3D laser cutting of pipes and profiles
* CNC bending up to 3100mm and thickness 15mm
* Welding: TiG, MIG and laser welding

We produce both small series and large projects

You can save up to 40% of the price including transport.

Send the DXF-STP-DWG file to lasernesta@yahoo.com for a quote

We also offer the option of shipping by freight forwarding or our own transport to any location in the world.

It would be a great pleasure for us to work with your company, we will take care of every detail of your business.

Design, manufacture and assembly of machine covers, complete assemblies and special constructions - these are the strengths of NeSt GmbH.

According to the individual wishes and ideas of the customers, the range of services extends from design studies to the creation of construction and manufacturing drawings with modern 3D CAD technology to the delivery and assembly of the finished products.

Steel sheet is essentially processed right up to the finish of the surface. In Herbrechtingen near Heidenheim an der Brenz, where the company is based, work is carried out with traditional Swabian precision, but still with the most modern application methods.

In close coordination with the customers, the technicians use state-of-the-art software to design tailor-made solutions based on ergonomic and economic requirements.

Constant quality monitoring takes on a dominant function. The company was already certified in accordance with DIN EN ISO 9001 in 1996. In May 2003, the process-oriented management system 9001: 2000 was successfully introduced at NeSt.In May 2009 we were certified according to DIN EN ISO 9001: 2008.
Due to the constantly increasing demands on the quality management system, we have taken the necessary steps to the next level for our customers and all institutions involved in the system. In May 2018 we were successfully certified according to DIN EN ISO 9001: 2015.

In order to meet the constant demands and to demonstrate quality awareness in a sustainable manner, NeSt GmbH was again certified in September 2015. By issuing DIN EN ISO 3834-3, the company now also fulfills the welding requirements within the framework of quality monitoring and the resulting certification.

As a metal processing company in the field of sheet metal construction, it goes without saying that we are a certified specialist company according to WHG.

As your competent partner on "bending - welding - punch" we will introduce you to our company and our activities.

As a small medium owner-managed company, we can respond flexibly and individually to your needs. The many years of single-run company was acquired on 01.04.2011 by the metal Neubauer GmbH & Co. KG. Through this acquisition, we can rely on the experience of our 40 employees. Due to continuous modernization of our machinery, we produce future-oriented and price conscious.

The New Hauser Group is the holding company of the 26 currently single company with 2,195 employees and an annual turnover of 450 million euros in 2008.

The activities of each company can be found in the following business areas again

Textile
• batching
• centerwind
• traveling cleaner
• Transport systems (cheeses, roving bobbins, spinning cans)
• suction and vacuum systems
• coating and dry locations (use behind Web and knitting machines)
• storage systems for bobbins
• Palletiersysteme

Contract production, such as
• Rotating parts (pistons, bushings, washers, rings, cones, control piston, shaft, axles, hubs, pins, screws, spindles, pins, cylindrical rollers, rollers verch. Sizes, etc.)
• Milled Parts
• complete machine and plant construction according to customer requirements from design to
Installation and Service
• roller production (up to 8000 mm total length)
• Locksmith
• Wage measurement (modern measuring room includingPortal meter Zeiss MMZ G-25 30 20)

Commercial Vehicles
• Production of portal elements
• Profile editing
• Installation
• Coating

-Machine Elements
• Expanding shafts
• Clamping Couplings
• chucks and adapters
• friction and blade shafts
• Shaft handling

-Kompressorenbau (shipping)
• Start air compressors
• pressure vessel
• Industrial Compressors
• compressed air starter
• Air-conditioning
• bilge oily water separator
• Biological treatment plants

Environmental engineering
�� Screw mills, up to 120 m³ / h
• starscreens
• Shovel separators
• air classifier

Products for the steel industry
• Band edge processing facilities
• rolling mills
��� conveyor systems


A growing product range and increasing demands of customers from individual divisions make a steady and adequate investment readiness required for a stable and healthy growth of the company can be secured for the future.

A particular interest is that in the group a technology-and innovation-friendly climate is to be promoted in the unconventional thinking and new ideas

The NIEROS GmbH specializes in the production of stainless steel products and has been in this area for a very long tradition.

We manufacture technically advanced products for the food, pharmaceutical, and chemical industries.

A main attention is paid to the development of our products and our know-how.

We offer you together with our partners a complete solution including advice and service.

NIEROS is a globally-oriented company, which exports more than 90% of its products. Our products are sold in every country in our well known partner.

Our basic product line stands for high quality and covers the needs of all discerning customers. We were exhibited in 1998, the ISO 9001:2000 certificate.

Nitera Mold company was founded in 2017 in a corporation with Nitera doo founded in 2000, and is engaged in consulting services and construction of metal substructures and structures.

The production program offers tailor made production line equipment, so most of our products are unique, and there is also serial production capacity.

Some of the production programs are Industrial furniture, Industrial fencing, Production trolleys. Also, the production program includes manufacture of dedicated tools and aluminum and plastic parts using a 1000 × 700 mm working area CNC milling machine.

The services we provide are plasticization services.

The consulting team comprises engineers who can design fixed and movable metal structures and make a 3D model of them.

Some of our clients are Zumtobel, Leoni, Johnson Electric, Xingyu, IMI, Minth.